TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
- Remise sur volume
- TS
- High-Hardness Steel
- 3 Flutes
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Effective Length (mm) | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
71.90 € | 1 | Disponible | 5 jours | 4 | 1 | 8 | 70 | 4 | 28 | 1 | 3.8 | |
78.11 € | 1 | Disponible | 5 jours | 6 | 1.5 | 12 | 80 | 6 | 30 | 2 | 5.8 | |
85.41 € | 1 | Disponible | 5 jours | 6 | 1.5 | 12 | 90 | 6 | 42 | 2 | 5.8 | |
96.14 € | 1 | Disponible | 5 jours | 8 | 2 | 16 | 85 | 8 | 40 | 2 | 7.7 | |
113.95 € | 1 | Disponible | 5 jours | 8 | 2 | 16 | 100 | 8 | 56 | 2 | 7.7 | |
87.94 € | 1 | Disponible | 5 jours | 10 | 2 | 20 | 100 | 10 | 50 | 2 | 9.7 | |
97.54 € | 1 | Disponible | 5 jours | 10 | 2 | 20 | 120 | 10 | 70 | 2 | 9.7 | |
106.75 € | 1 | Disponible | 5 jours | 10 | 2 | 20 | 140 | 10 | 90 | 2 | 9.7 | |
121.35 € | 1 | Disponible | 5 jours | 12 | 2 | 24 | 110 | 12 | 60 | 2 | 11.7 | |
136.67 € | 1 | Disponible | 5 jours | 12 | 2 | 24 | 135 | 12 | 84 | 2 | 11.7 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure | |||
| Outer Diameter D |
Radius R |
Effective Length ℓ1 |
||||||
| TSC-CRLN-HFEM3S | 4 | 1 | 28 | 8 | 3.8 | 70 | 4 | 1 |
| 6 | 1.5 | 30 | 12 | 5.8 | 80 | 6 | 2 | |
| 6 | 1.5 | 42 | 12 | 5.8 | 90 | 6 | 2 | |
| 8 | 2 | 40 | 16 | 7.7 | 85 | 8 | 2 | |
| 8 | 2 | 56 | 16 | 7.7 | 100 | 8 | 2 | |
| 10 | 2 | 50 | 20 | 9.7 | 100 | 10 | 2 | |
| 10 | 2 | 70 | 20 | 9.7 | 120 | 10 | 2 | |
| 10 | 2 | 90 | 20 | 9.7 | 140 | 10 | 2 | |
| 12 | 2 | 60 | 24 | 11.7 | 110 | 12 | 2 | |
| 12 | 2 | 84 | 24 | 11.7 | 135 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, realizing a longer operational life.
● The combination of a radius with negative flutes, appropriate core thickness and 45° twist yields an improved high-capacity machining thanks to the high rigidity, sharpness and high feed rate.
● The long neck model is ideal for machining deep grooves, such as deep pockets.
● Universal model capable of everything from engraving through to side-surface, curving, coarse and medium finishing.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acier inoxydable / Fonte | Number of Flutes(sheet) | 3 | Model | Long Neck Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.015 | Additional Classification | Stocked Product |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Effective Length(mm)
-
Type
- TSC-CRLN-HFEM3S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.