• 10 millions de produits
  • Livraison le jour même pour 30.000 articles en stock
  • Prix concurrentiels

Nos horaires d'ouverture: 08:00-17:00 (Lun au Jeu) et 08:00-16:00 (Ven)

Recherche par
catégorie ou fournisseur

Recherche par catégorie
Composants mécaniques
Vis, boulons, rondelles, écrous
Semi-finis
Câbles et Connecteurs
Automatisme et Contrôles
Outils coupants
Fournitures industrielles
Manutention et Stockage
Protection individuelle – Hygiène & Sécurité
Laboratoires et Salles blanches
Composants pour la fabrication d'outils d'estampage
Composants pour la fabrication de moules d'injection

Recherche par marque
Marques représentées

Dispositif de serrage à tourner(page2)

  • Données à afficher
    30
    45
    60
  • Trier
Nombre de jours d'expédition
  • Tous les articles
  • 3 jours ou moins
  • 4 jours ou moins
  • 5 jours ou moins
  • 6 jours ou moins
  • 7 jours ou moins
  • 10 jours ou moins
  • 11 jours ou moins
  • 63 jours ou moins
  • Work Driving Center with HD-Type Exchangeable Pawl

    Work Driving Center with HD-Type Exchangeable Pawl

    FUTAMURA MACHINES & TOOLS

    When the workpiece driving center jaws wear down or become corrupted then they should be promptly replaced using the exchange jaws.

    • Remise sur volume
    à partir de
    89.21€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Soft Jaw (for Houwa)

    Soft Jaw (for Houwa)

    TRUSCO NAKAYAMA

    [Features] - Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.

    à partir de
    37.92€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Soft Jaw (for Nikko)

    Soft Jaw (for Nikko)

    TRUSCO NAKAYAMA

    [Features] - Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.

    à partir de
    43.49€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Rolling Center NCW

    Rolling Center NCW

    FUTAMURA MACHINES & TOOLS

    2 types of bearings are used in the interior part of this machine: needle bearings (2 pieces) and a thrust bearing (1 piece). A unique labyrinth mechanism (non-contact) has been adopted as a countermeasure against penetration when oil cutting, giving improved accuracy retention and a longer usable life span.

    à partir de
    356.41€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Scroll Chuck Model (Integrated Pawl Type/Runout Adjustment)

    Scroll Chuck Model (Integrated Pawl Type/Runout Adjustment)

    KOBAYASHI IRON WORKS

    The correction of the core run out can be easily performed. Indexing Stand, Lathe, Grinding Machine etc.

    à partir de
    552.17€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • Firm Shaving Chuck (Soft Jaw)

    Firm Shaving Chuck (Soft Jaw)

    NEW STRONG

    It is a 4 piece set.

    • Remise sur volume
    à partir de
    168.83€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Carbide Long Center

    Carbide Long Center

    TAKURA KOGU

    Has a carbide tip and is to be used with lathes to prevent runout of the product being processed.

    • Remise sur volume
    à partir de
    90.05€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Rolling Center RST with Carbide

    Rolling Center RST with Carbide

    FUTAMURA MACHINES & TOOLS

    The exterior, shape and structure are same as the RST type, and the cemented carbide tip of the center tip part has been brazed. The end has a carbide alloy tip for excellent resistance to wear and friction.

    • Remise sur volume
    à partir de
    247.07€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • 3-Pawl Scroll Chuck (Split-Pawl Type/Light)

    3-Pawl Scroll Chuck (Split-Pawl Type/Light)

    KOBAYASHI IRON WORKS

    Main body is lightweight and thin, and there is less interference with the cutting tool. Drilling Machine, Indexing Stand, Milling Machine etc.

    à partir de
    2,260.17€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • High-Pawl (Combining Howa and Kitagawa)

    High-Pawl (Combining Howa and Kitagawa)

    TRUSCO NAKAYAMA

    [Features] - Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.

    à partir de
    87.71€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Race Center

    Race Center

    TRUSCO NAKAYAMA

    [Features] - All steel is pure. [Use] For runout prevention of work pieces.

    à partir de
    27.49€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Work Driving Center with fixed DK-Type Pawl

    Work Driving Center with fixed DK-Type Pawl

    FUTAMURA MACHINES & TOOLS

    Any corroded or damaged nails of the work driving center must be promptly replaced

    à partir de
    167.00€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Rolling Center 100

    Rolling Center 100

    FUTAMURA MACHINES & TOOLS

    Applicable for cutting small objects, -17A is a threaded type for thin objects that is ideal for the end processing. In this machine's interior part there are 2 pieces of needle bearings and 3 points of thrust bearings used, and the main body diameter is designed small.

    • Remise sur volume
    à partir de
    124.16€
    Délai de livraison minimum
    10 jours

    *Prix unitaire/configuration de base

  • High-speed Rolling Center

    High-speed Rolling Center

    KAWASHIMO

    [Features] - Cutting oil prevents the ingress of water with its own structure by employing the sun freon seal. It is ideal for dry cutting and also NC lathe wet cutting. [Applications] - Mainly supports deflection prevention of long workpieces.

    à partir de
    304.76€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Soft Jaw (for Matsumoto)

    Soft Jaw (for Matsumoto)

    TRUSCO NAKAYAMA

    [Features] - Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.

    à partir de
    48.97€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • S-Type Live Center for High Speed

    S-Type Live Center for High Speed

    TAKURA KOGU

    For High Speed Precision

    • Remise sur volume
    à partir de
    149.16€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • 4-Pawl Scroll Chuck (Unified Pawl Type)

    4-Pawl Scroll Chuck (Unified Pawl Type)

    KOBAYASHI IRON WORKS

    [Features] Exceptionally durable claws with heat treated high hardness. - It can be used for interchanging the inner and outer jaws. - It is ideal for gripping the square shaped workpiece from the round bar.

    • Remise sur volume
    à partir de
    588.38€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • Rolling Center NC70

    Rolling Center NC70

    FUTAMURA MACHINES & TOOLS

    Designed for ultra-high speed rotation (7000 min-1) and high accuracy (TIR 0.003) thrust. Carefully designed with 2 types of bearings, namely combined angular contact bearings (3 pieces) and needle bearings, to withstand a high degree of rigidity.

    à partir de
    624.50€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Rolling Center PE

    Rolling Center PE

    FUTAMURA MACHINES & TOOLS

    Since the cutlery stand is brought close to the object to be cut, it becomes possible to shorten the bite output, and dimensions after cutting without heavy cutting as well as bite deflection can also be accurately maintained.

    • Remise sur volume
    à partir de
    227.14€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Rolling Center SR

    Rolling Center SR

    FUTAMURA MACHINES & TOOLS

    In order to be absorbed by the dish panel built into the center, the finish accuracy of the extension of the workpiece caused by the generated processing heat during cutting is well done, with no strain of the workpiece.

    à partir de
    326.17€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Rolling Center HB

    Rolling Center HB

    FUTAMURA MACHINES & TOOLS

    Since there are many bearings used to withstand heavier objects than the standard type, the outer diameter of the main body part and center axis diameter are manufactured thick.

    à partir de
    633.92€
    Délai de livraison minimum
    11 jours

    *Prix unitaire/configuration de base

  • Live Center for High Speed

    Live Center for High Speed

    KOBAYASHI IRON WORKS

    [Features] - Uses a unique head driving mechanism (head integrated with center). - 100% prevention of dust and cutting fluid permeation, maintaining high accuracy. [Applications] - For wet cutting of NC Lathe.

    • Remise sur volume
    à partir de
    156.33€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

Configurer

Réinitialiser

Affiner la recherche en spécifiant le fabricant

Marque

Produits MISUMI
  • Produits compétitifs
Activité produits circulation publique MISUMI

Affiner la recherche en précisant le type de données CAO

Sélectionner l'image

Fermer