Doigts diviseurs（Page 4）
Filtrer les produits par : Type
?* À propos du délai d'expédition et des prix
-
Doigt diviseur de type court (avec fonction verrou) IPSL
KONISHI MFG
[Features]
· Pulling the knob and rotating it by 90° locks the product with the center pin in a retracted state.
· Returning the knob to its original position releases the lock and the center pin returns to its original position.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 49.70 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Doigt diviseur (inox) IP-1-sus
KONISHI MFG
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.- Remise sur volume
- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 25.85 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Doigt diviseur (inox), IP-2-sus
KONISHI MFG
Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 28.93 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Doigt diviseur à levier (inox) ILP-sus
KONISHI MFG
Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 105.15 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Douilles de fixation, pour doigts et verrous d'indexage
HALDER
Utilisables pour recevoir les embouts de doigts et verrous d'indexage. Adaptées pour brides de fixation 22110.0412 et 22110.0416.- Fichiers CAD 3D disponibles
› Configurer maintenantà partir de∗ ： 3.68 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Doigts d'indexage, pour pièces de faible épaisseur
HALDER
Doigts d'indexage pour pièces de faible épaisseur avec alésage débouchant.- Fichiers CAD 3D disponibles
› Configurer maintenantà partir de∗ ： 3.94 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Verrous d'indexage, avec bride de fixation
HALDER
Index bolts are used for indexing purposes.
Meilleure maniabilité grâce à la poignée plastique.- Fichiers CAD 3D disponibles
› Configurer maintenantà partir de∗ ： 32.24 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Entretoise, pour doigts d'indexage
HALDER
Cette entretoise permet d'adapter la longueur filetée des doigts d'indexage à la longueur souhaitée.- Fichiers CAD 3D disponibles
› Configurer maintenantà partir de∗ ： 0.56 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Poussoirs latéraux
HALDER
Utilisables pour positionner et appliquer une pression, p. ex. pour la peinture ou le sablage de pièces.- Fichiers CAD 3D disponibles
› Configurer maintenantà partir de∗ ： 7.83 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Poignées, pour broches de positionnement
HALDER
La poignée permet une manipulation simple et rapide de la broche de positionnement.- Fichiers CAD 3D disponibles
› Configurer maintenantà partir de∗ ： 8.18 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers for welding
GANTER
Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 19.74 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 9.74 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 8.98 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers, flange for surface mounting
GANTER
Cam action indexing plungers GN 612.2 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 30.78 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Plunger pin protruded
GANTER
Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 23.74 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Stainless Steel
GANTER
Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 16.82 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers, Steel
GANTER
Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 14.08 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers, Steel, with locking function
GANTER
The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 17.40 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Steel, without locking function
GANTER
For GN 721 cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 17.50 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Zinc die casting
GANTER
Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 7.30 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Clamping indexing plungers with safety function
GANTER
Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 23.38 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Clamping knobs with indexing plunger
GANTER
Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 8.00 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 3.06 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Indexing plunger, Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 8.36 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers for thin walled equipment
GANTER
Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 16.86 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers for welding, with rest position
GANTER
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.
A notch keeps the plunger in this position.
The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 15.20 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Indexing plungers for welding, without rest position
GANTER
Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 14.44 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with red knob
GANTER
Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 9.86 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Indexing plungers with rest position, for thin walled equipment
GANTER
Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 18.96 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Indexing plungers with rest position, Plunger Steel
GANTER
Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 8.78 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with rest position, Stainless Steel / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 14.60 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with rest position, Steel / Plastic knob
GANTER
Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 9.98 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers without thread, Steel / Plastic knob
GANTER
Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 7.94 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, removable
GANTER
Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 14.36 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel / plastic knob
GANTER
Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 10.86 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 22.44 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 14.80 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel, with knob, with and without rest position
GANTER
GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 5.40 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel / long Plastic-knob
GANTER
Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 9.16 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 12.64 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 9.86 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 9.86 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Indexing plungers, Steel, with knob, with and without rest position
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 4.76 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 4.04 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel, with red knob
GANTER
Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 7.34 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
| Type |
| Mécanisme de verrouillage |
| Méthode de montage |
| Longueur totale |
| Matériau du corps |
| Tout inoxydable |
| Matériau de l'embout |
| D.E. du corps / filetage M(mm) |
| Course S(mm) |
| Traitement de surface d'embout |
| Traitement thermique de l'embout |
| D.E. de l'embout d(Ø) |
| Longueur L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | KONISHI MFG | KONISHI MFG | KONISHI MFG | KONISHI MFG | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Cam action indexing plungers, Steel, without locking function | Indexing plungers with rest position, for thin walled equipment | Indexing plungers with rest position, Stainless Steel / Plastic knob | Indexing plungers, Stainless Steel, with knob, with and without rest position | Indexing plungers, Steel, with knob, with and without rest position | Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| à partir de∗ | 49.70 € *Prix unitaire/configuration de base | 25.85 € *Prix unitaire/configuration de base Remise sur volume | 28.93 € *Prix unitaire/configuration de base | 105.15 € *Prix unitaire/configuration de base | 3.68 € *Prix unitaire/configuration de base | 3.94 € *Prix unitaire/configuration de base | 32.24 € *Prix unitaire/configuration de base | 0.56 € *Prix unitaire/configuration de base | 7.83 € *Prix unitaire/configuration de base | 8.18 € *Prix unitaire/configuration de base | 19.74 € *Prix unitaire/configuration de base Remise sur volume | 9.74 € *Prix unitaire/configuration de base Remise sur volume | 8.98 € *Prix unitaire/configuration de base Remise sur volume | 30.78 € *Prix unitaire/configuration de base Remise sur volume | 23.74 € *Prix unitaire/configuration de base Remise sur volume | 16.82 € *Prix unitaire/configuration de base Remise sur volume | 14.08 € *Prix unitaire/configuration de base Remise sur volume | 17.40 € *Prix unitaire/configuration de base Remise sur volume | 17.50 € *Prix unitaire/configuration de base Remise sur volume | 7.30 € *Prix unitaire/configuration de base Remise sur volume | 23.38 € *Prix unitaire/configuration de base Remise sur volume | 8.00 € *Prix unitaire/configuration de base Remise sur volume | 3.06 € *Prix unitaire/configuration de base Remise sur volume | 8.36 € *Prix unitaire/configuration de base Remise sur volume | 16.86 € *Prix unitaire/configuration de base Remise sur volume | 15.20 € *Prix unitaire/configuration de base Remise sur volume | 14.44 € *Prix unitaire/configuration de base Remise sur volume | 9.86 € *Prix unitaire/configuration de base Remise sur volume | 18.96 € *Prix unitaire/configuration de base Remise sur volume | 8.78 € *Prix unitaire/configuration de base Remise sur volume | 14.60 € *Prix unitaire/configuration de base Remise sur volume | 9.98 € *Prix unitaire/configuration de base Remise sur volume | 7.94 € *Prix unitaire/configuration de base Remise sur volume | 14.36 € *Prix unitaire/configuration de base Remise sur volume | 10.86 € *Prix unitaire/configuration de base Remise sur volume | 22.44 € *Prix unitaire/configuration de base Remise sur volume | 14.80 € *Prix unitaire/configuration de base Remise sur volume | 5.40 € *Prix unitaire/configuration de base Remise sur volume | 9.16 € *Prix unitaire/configuration de base Remise sur volume | 12.64 € *Prix unitaire/configuration de base Remise sur volume | 9.86 € *Prix unitaire/configuration de base Remise sur volume | 9.86 € *Prix unitaire/configuration de base Remise sur volume | 4.76 € *Prix unitaire/configuration de base Remise sur volume | 4.04 € *Prix unitaire/configuration de base Remise sur volume | 7.34 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum | 7 jours | Jour même | 7 jours | 6 jours | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | 5 jours | Jour même | Jour même | 5 jours | 5 jours | Jour même | Jour même | 5 jours | 5 jours | Jour même | 5 jours | Jour même | 5 jours | Jour même | Jour même | 5 jours | Jour même | 5 jours | 5 jours | Jour même | Jour même | Jour même | Jour même | 4 jours | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | 5 jours | Jour même | Jour même | Jour même |
| Type | Bouton standard | Bouton standard | Bouton standard | Type de levier | Composants associés | Bouton standard | Boutons spéciaux | - | Boutons spéciaux | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mécanisme de verrouillage | Avec verrouillage | Non fourni | Avec verrouillage | Avec verrouillage | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Méthode de montage | À visser | À visser | À visser | À visser | À visser | À visser / Autres | À visser | Autres | Ajustement forcé | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Longueur totale | Court | Standard | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau du corps | Acier | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier | Acier | Acier | Acier inoxydable | Acier | Acier inoxydable | - | - | - | - | - | Acier inoxydable | - | - | - | - | - | - | - | - | Acier | Acier | Acier | - | Acier | - | Acier inoxydable | - | - | - | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | - | Acier | Acier | - | Acier | Acier | - |
| Tout inoxydable | Non conforme | Non conforme | Non conforme | Non conforme | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau de l'embout | Acier | Acier inoxydable | Acier inoxydable | Acier inoxydable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. du corps / filetage M(mm) | 12 | 8 ～ 16 | 8 ～ 16 | 16 ～ 20 | - | - | - | - | - | - | - | 16 ～ 20 | 16 ～ 20 | 16 ～ 20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Course S(mm) | 6 | 4 ～ 8 | 4 ～ 8 | 10 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement de surface d'embout | Non fourni | Non fourni | Non fourni | Non fourni | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement thermique de l'embout | Non fourni | Non fourni | Non fourni | Non fourni | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. de l'embout d(Ø) | 6 | 4 ～ 8 | 4 ～ 8 | 10 ～ 12 | M12 x 1,5 ～ M16 x 1,5 | 6 ～ 8 | 6 ～ 12 | 8 ～ 16 | 8 ～ 22 | 60 ～ 80 | - | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 10 | 4 ～ 12 | 4 ～ 12 | 5 ～ 10 | 5 ～ 10 | 4 ～ 12 | - | - | - | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 | 6 ～ 10 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 5 ～ 10 | 5 ～ 8 | 7 ～ 10 | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 3 ～ 10 | 4 ～ 12 | 6 ～ 8 | 6 ～ 8 | 6 ～ 10 | 3 ～ 10 | 3 ～ 10 | 4 ～ 16 |
| Longueur L(mm) | 45 | 39 ～ 71 | 43 ～ 79 | 56 ～ 69 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
-
Mécanisme de verrouillage
-
Non fourni
-
Avec verrouillage
-
Sans verrouillage
-
Non fourni
-
Méthode de montage
-
Longueur totale
-
Matériau du corps
-
Tout inoxydable
-
Matériau de l'embout
-
D.E. du corps / filetage M(mm)
-
Course S(mm)
-
Traitement de surface d'embout
-
Traitement thermique de l'embout
-
D.E. de l'embout d(Ø)
-
Longueur L(mm)
Fabricant
Type de données CAO
-
- 2D
- 3D
Jours d'expédition standard
-
- Tous les articles
- Jour même
- 2 jours ou moins
- 3 jours ou moins
- 4 jours ou moins
- 5 jours ou moins
- 6 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 9 jours ou moins
- 10 jours ou moins
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.