• 10 millions de produits
  • Livraison le jour même pour 30.000 articles en stock
  • Prix concurrentiels

Nos horaires d'ouverture: 08:00-17:00 (Lun au Jeu) et 08:00-16:00 (Ven)

Recherche par
catégorie ou fournisseur

Recherche par catégorie
Composants mécaniques
Vis, boulons, rondelles, écrous
Semi-finis
Câbles et Connecteurs
Automatisme et Contrôles
Outils coupants
Fournitures industrielles
Manutention et Stockage
Protection individuelle – Hygiène & Sécurité
Laboratoires et Salles blanches
Composants pour la fabrication d'outils d'estampage
Composants pour la fabrication de moules d'injection

Recherche par marque
Marques représentées

Supports de miroir

  • Données à afficher
    30
    45
    60
  • Trier
Nombre de jours d'expédition
  • Tous les articles
  • 3 jours ou moins
  • 4 jours ou moins
  • 6 jours ou moins
  • 7 jours ou moins
  • 8 jours ou moins
  • 9 jours ou moins
  • 12 jours ou moins
  • 13 jours ou moins
  • 23 jours ou moins
  • 32 jours ou moins
  • Support de miroir rectangulaire

    Support de miroir rectangulaire

    SURUGA SEIKI

    [Features] - Holder for fastening square mirror, filter, projection plate and the like. - Use two screws to fasten. - Holder only for fastening. - Two types of holders with 60 mm and 100 mm width

    CAD
    2D3D
    à partir de
    55.78€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Support de miroir, modèle compact (avec verrouillage)

    Support de miroir, modèle compact (avec verrouillage)

    SURUGA SEIKI

    [Features] - A holder that fixes a small mirror up to ø 30 mm and finely adjust the tilt of the 2 axes (θy and θz) is made. - "Adhesive type" or "3-point support type" are available for the mirror installation method. - With the rod-less type, installation is done with M3 or M6 screws. - With three point support (F58N-30-2), it is possible to fix mirrors of ø 20 – ø 30 by changing the position of the pin for support on the bottom side. - The tilt fine adjustment knob can be affixed by the lock-nut at P = 0.5 mm.

    CAD
    2D3D
    à partir de
    92.31€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • Supports de miroir Gimbaled

    Supports de miroir Gimbaled

    SURUGA SEIKI

    A holder that is secured to elements such as a mirror, plate beam splitter or such, and that can adjust the tilt of the two shafts. The rotational center during slight motion and the center of the mirror are always integrated. [Features] - F50,F55 - A holder that is secured to elements such as a mirror, plate beam splitter or lens that can adjust the tilt (θy,θz). - If the clamps for both θy,θz are tightened, a slight movement of ±4° – 6° is possible, and 360° coarse movement is possible by loosening the clamps. - The rotational center during fine and coarse movement and the center of the mirror are always integrated due to the gimbal mechanism. - The length of the rod can be modified since the standard rod attached has ø 20, L=60 mm. The screw hole for the holder is M6P = 1 and the A40 – A42 rods can be used. - Mirror holder F50: There is the A type that has a micro meter head feeding method and the E type that has the screw method. - Horizontal operation mirror holder F55: Independent horizontal operation (the operational system is mounted in a horizontal direction) so operation is possible without putting a hand into the optical axis and proximity specifications are possible. - F52 - A holder that is secured to elements such as a mirror, plate beam splitter or lens and that can adjust the tilt (θy,θz) of the dual axis. - Tilt of the dual-axis θy,θz. Fine adjustment of ±2° or ±3° (F52) is possible. - The rotational center during fine and coarse movement and the center of the mirror are always integrated due to the gimbal mechanism. - Attachment and removal of the elements such as mirrors is performed using a screw ring method, and a resin ring is attached for protection.

    CAD
    2D3D
    à partir de
    169.22€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Supports directionnels de faisceau

    Supports directionnels de faisceau

    SURUGA SEIKI

    [Features] - Two types are available: one where only the upper mirror is movable, and another where the top and bottom mirrors are movable. - Adjustment pitches can be selected from 0.5mm and 0.25mm. - Two types of mirror fastening methods available: Adhesive and 3-point support. - The pore underside has an M16 = 1 mm male screw. - Can be fixed to a magnet base or plate

    CAD
    2D3D
    à partir de
    233.07€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Support de miroir carré cinématique

    Support de miroir carré cinématique

    CHUO PRECISION INDUSTRIAL

    [Features] - A three-point supporting mirror holder. - The sample is fixed into the lock screw (round and square types only). - The lock screw can be turned with a flathead screwdriver (not attached) - It is for square type (square-shaped) optical elements, and the tilt can be adjusted in two axis directions.

    CAD
    2D
    à partir de
    107.88€
    Délai de livraison minimum
    32 jours

    *Prix unitaire/configuration de base

  • Supports de miroir demi pouce

    Supports de miroir demi pouce

    SURUGA SEIKI

    Mirror holder especially for the ø 12.7 mm size The actuator screws are available in a set bolt type which allows you to prevent malfunction by means of a knurled knob and inclusion of machinery, both allowing the user to manipulate the screws by hand. [Features] - It implements a 100% new design with small size and high performance as its key concepts. - The main unit is small in size allowing for installation in spaces as tight as 1 square inch. At the same time, it keeps the meandering width and hysteresis width of the 2 axes (θy and θz) in the order of μrad, making its stability at 60 hours (normal temperature) after positioning to be top of its class. - Mounting is done with one M4 screw and creates a margin to prevent rotation. - You can also choose a mounting plate type that will allow you to install it at 0° and 45°. - If a plate was used, the rod shaft and mirror reflection surface will be the same.

    CAD
    2D3D
    à partir de
    91.85€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Supports de miroir (axe optique : 25mm)

    Supports de miroir (axe optique : 25mm)

    SURUGA SEIKI

    This is the mirror holder of the optical axis, 25 mm in height, for the opt-station. You can choose the mounting method so as not to cause the distortion of the device by the mounting. * The CAD data of this series is under modification. Please wait until the modification is complete.

    CAD
    2D3D
    à partir de
    92.00€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Supports de miroir (bande de fixation)

    Supports de miroir (bande de fixation)

    SURUGA SEIKI

    It is a mirror holder equipped with a slit clamp (split clamp) system. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    à partir de
    122.45€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Supports de miroir commandés de dessus

    Supports de miroir commandés de dessus

    SURUGA SEIKI

    Upward operating mirror holder with excellent safety and operability. *CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    à partir de
    183.31€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Support de type rainuré

    Support de type rainuré

    CHUO PRECISION INDUSTRIAL

    [Features] - Holder for fastening with clamp screws, placing the mirror and chart between the groove. - Insert the DURACON at the tip of the clamp screw, and mount the Teflon sheet to the opposite side to make objects insert in between scratch resistant.

    CAD
    2D
    à partir de
    54.51€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Supports de miroir

    Supports de miroir

    SURUGA SEIKI

    An inexpensive mirror holder that is secured to elements such as a mirror, plate beam splitter or such, and that can adjust the tilt of the two shafts. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    à partir de
    100.49€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • Support de miroir de précision (à cardan)

    Support de miroir de précision (à cardan)

    SURUGA SEIKI

    The center of the tilt axis is consistent with the mirror surface. By recombining the plates, it can be modified to a type with freely left to right vertical incidence angle of 45°. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    à partir de
    258.88€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Support de miroir simple

    Support de miroir simple

    CHUO PRECISION INDUSTRIAL

    [Features] - Can be used without regardless of the shape (round or rectangle) because the mirror holder fastens optical elements by adhesion. - Kinematic-type that adjusts the gate using the inclined pivot point (top left) as a reference. - Types that include a shaft (ø 8 mm; length: 60 mm) and base plate (long hole for M6 screws) are available.

    CAD
    2D
    à partir de
    107.44€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Support de miroir fin cinématique

    Support de miroir fin cinématique

    CHUO PRECISION INDUSTRIAL

    [Features] - A three-point supporting mirror holder. - The lock screw can be turned with a flathead screwdriver (not attached) - It is for rectangular optical elements, and the tilting can be adjusted in two axis directions (square optical elements can also be used). - It is for rectangular optical elements, and the tilting can be adjusted in two axis directions (square optical elements can also be used).

    CAD
    2D
    à partir de
    107.93€
    Délai de livraison minimum
    33 jours

    *Prix unitaire/configuration de base

  • Supports de miroir activés par le haut, modèle compact

    Supports de miroir activés par le haut, modèle compact

    SURUGA SEIKI

    [Features] - Compact type, top-operation mirror holder with excellent safety and operability. - Fastens small mirrors up to ø 30 and two-axis flap fine adjustments can be performed. - Locks flap wheels with a lock nut. - Two types of mirror fastening methods available: Adhesive and 3-point support. - Rod type and non-rod type are available. - The 3-point support type replaces the two-point support type cand can fasten mirror of ø 20 – ø 30 mm.

    CAD
    2D3D
    à partir de
    122.45€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Support de miroir rond cinématique

    Support de miroir rond cinématique

    CHUO PRECISION INDUSTRIAL

    [Features] - A three-point supporting mirror holder. - The sample is fixed by using a lock screw and pad (round and square types only). - The lock screw can be turned with a flathead screwdriver (not attached). A round type mirror holder is for circular optical elements, and the tilting can be adjusted in two axis directions. - A square type mirror holder is for square type (square-shaped) optical elements, and the tilting can be adjusted in two axis directions. - A grooved type mirror holder is for rectangular optical elements, and the tilting can be adjusted in two axis directions (square optical elements can also be used).

    CAD
    2D
    à partir de
    107.82€
    Délai de livraison minimum
    33 jours

    *Prix unitaire/configuration de base

  • Supports de miroir, modèle compact et mouvement précis

    Supports de miroir, modèle compact et mouvement précis

    SURUGA SEIKI

    This holder holds a small mirror (up to ø 30 mm) in place, and is used for the tilt fine adjustment of the 2 axes. [Features] - Fine motion resolution is twice that of F58N at 0.7°/rotation. - The mirror installation method can be either by adhesive or by 3-point support. - Both the adhesive and the screws come in a rod type and rod-less types. - With the rod-less type, installation is done with M3 or M6 screws. - With the 3-point support time, the mirror can be mounted as long as it is ø 20 – ø 30 mm by pinning it at two points.

    CAD
    2D3D
    à partir de
    92.04€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • Support de miroir haute stabilité

    Support de miroir haute stabilité

    SURUGA SEIKI

    This product is ideal for locations necessitating stability and operability, and locations in which high precision or alignment processes are necessary. *CAD data for this series is currently under modification. Please wait until modifications are complete.

    CAD
    2D3D
    à partir de
    122.48€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Support de miroir de type Gimbaled, type à commande par le haut

    Support de miroir de type Gimbaled, type à commande par le haut

    CHUO PRECISION INDUSTRIAL

    [Features] - Mirror holder that incorporates a round mirror and a Gimbal type that matches the center of the mirror to the rotating center of the holder. - The gate is adjusted from top of holder so there is no concern for horizontally cutting the optical system for the adjustment. - The shaft mounting direction can be changed in 90°.

    CAD
    2D
    à partir de
    249.16€
    Délai de livraison minimum
    23 jours

    *Prix unitaire/configuration de base

  • Supports de miroir hautes performances (axe optique : 25mm)

    Supports de miroir hautes performances (axe optique : 25mm)

    SURUGA SEIKI

    [Features] - Small specification of FM532. - Optical axis height of 25mm optical axis height is designed for the optical station. - This product is ideal for locations that require stability and operability, and locations in which high precision or alignment processes are necessary.

    CAD
    2D3D
    à partir de
    99.61€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Support de miroir compact à mouvement précis (avec verrouillage)

    Support de miroir compact à mouvement précis (avec verrouillage)

    SURUGA SEIKI

    [Features] - A flap lock nut is attached to FM58 - There is an "adhesive type" or by "3-point support type" for the mirror installation method. - Rod type and rod-less type are available for both adhesive and screw. - For the rod-less type, installation is done with M3 or M6 screws. - For the 3-point support type, the mirror can be fixed up to ø 20 – ø 30 mm by pinning it at two points.

    CAD
    2D3D
    à partir de
    92.27€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

Configurer

Réinitialiser

Affiner la recherche en spécifiant le fabricant

Marque

Activité produits circulation publique MISUMI

Affiner la recherche en précisant le type de données CAO

Sélectionner l'image

Fermer