• 10 millions de produits
  • Livraison le jour même pour 30.000 articles en stock
  • Prix concurrentiels

Nos horaires d'ouverture: 08:00-17:00 (Lun au Jeu) et 08:00-16:00 (Ven)

Recherche par
catégorie ou fournisseur

Recherche par catégorie
Composants mécaniques
Vis, boulons, rondelles, écrous
Semi-finis
Câbles et Connecteurs
Automatisme et Contrôles
Outils coupants
Fournitures industrielles
Manutention et Stockage
Protection individuelle – Hygiène & Sécurité
Laboratoires et Salles blanches
Composants pour la fabrication d'outils d'estampage
Composants pour la fabrication de moules d'injection

Recherche par marque
Marques représentées

Tiges, Consoles

  • Données à afficher
    30
    45
    60
  • Trier
Nombre de jours d'expédition
  • Tous les articles
  • 3 jours ou moins
  • 5 jours ou moins
  • 7 jours ou moins
  • 8 jours ou moins
  • 10 jours ou moins
  • 17 jours ou moins
  • 22 jours ou moins
  • 32 jours ou moins
  • Tiges

    Tiges

    SURUGA SEIKI

    It is optical component mounting rod made of stainless steel. You can use the holder for opt-station with M4 screws as a rod type holder. [Features] - [A40M / A41M] It is stainless steel optical component mounting rod. - You can use the holder for opt-station with M4 screws as a rod type holder. - [A40 / A41 / A42] It is stainless steel optical component mounting rod. - It is equipped with M6P = 1 of screws that are common from A40 to A42, so it can be mounted to a variety of holders and the like. - Since there are ø 3 mm or 4 mm through holes on the bottom of the M6 screw, when mounting the holder it can be securely fixed by passing a wrench or such through the hole.

    Délai de livraison minimum
    7 jours
  • Tige de console

    Tige de console

    SURUGA SEIKI

    Stand used to adjust the height of holders and such. The rod can firmly secure two points of line contact with a point of clamp screw contact. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D
    à partir de
    26.10€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Tige universelle

    Tige universelle

    SURUGA SEIKI

    Length / Diameter / Tap can be set from the graph. In the case of special tap or special outside diameter please contact us. * CAD data of this series is currently being revised. Please wait until the revisions are complete.

    Délai de livraison minimum
    10 jours
  • Arbre pour caméra, 1/4 pouce

    Arbre pour caméra, 1/4 pouce

    CHUO PRECISION INDUSTRIAL

    [Features] - A ø 20 mm stainless steel shaft on which a tripod screw (nominally 1/4) has been processed

    CAD
    2D
    à partir de
    23.84€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Montants, φ12

    Montants, φ12

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes. (PL-12-300M cannot be extended)

    CAD
    2D
    à partir de
    14.45€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Tige Shirttail

    Tige Shirttail

    SURUGA SEIKI

    Using this rod, it is possible to set the holder and such at various optical axis heights without having to buy a new rod. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    Délai de livraison minimum
    7 jours
  • Jeu Paul, hauteur variable

    Jeu Paul, hauteur variable

    SURUGA SEIKI

    This is used if the height of the height-adjustment platform is changed, etc. You can define any length in 1 mm increments within 300 mm. * The CAD data for this series is being revised. Please wait a little longer until the revisions are completed.

    Délai de livraison minimum
    10 jours
  • Pôles

    Pôles

    SURUGA SEIKI

    It is a pole made stainless steel. Standing with various kinds of stages and bases using M16 p=1 screws, it can be used connected with cross-clamps, etc. * The CAD data for this series is currently under modification. Please wait until the modification is complete.

    Délai de livraison minimum
    7 jours
  • Montants, φ8

    Montants, φ8

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes.

    CAD
    2D
    à partir de
    14.18€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Boutons de serrage

    Boutons de serrage

    SURUGA SEIKI

    Clamp knob for the rod stand. The tip is a spring pin. The rod will not fall off when lightly tightened, it can be adjusted vertically with one hand.

    CAD
    2D
    à partir de
    8.88€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Consoles à montée/descente haute précision

    Consoles à montée/descente haute précision

    SURUGA SEIKI

    [Features] - A rod stand that can do fine vertical movements. - Once the rod has been fixed to the rod fixing knob, the knurled adjustable knob can be rotated, and allows fine vertical movement of the rod. - Fixed to the vertical fixing clamp once adjustments are complete. - The range of fine movement is 10 mm.

    CAD
    2D
    à partir de
    109.25€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Poteaux, φ20

    Poteaux, φ20

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes.

    CAD
    2D
    à partir de
    19.50€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Colonne, φ12

    Colonne, φ12

    CHUO PRECISION INDUSTRIAL

    [Features] - Fastens all types of holder shafts, such as mirror holders. - Products for ø 8 mm, ø 12 mm, and ø 20 mm and by fastening heights (depths) are available. - Clamp screw is used to fasten the shaft and can be fastened from any of three places. - Collar (thickness 10 mm) that can change the direction with the height fixated is standardized. - Increases holding strength by disposing clamp screws at two locations (up and down) on products with a total length of 80 mm or longer.

    CAD
    2D
    à partir de
    31.06€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Colonnes de tige de type mandrin

    Colonnes de tige de type mandrin

    SURUGA SEIKI

    It is fixed by the collet-type clamping method, so it has good stability and can be more effectively fixed. * The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D
    à partir de
    90.85€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Bague intermédiaire

    Bague intermédiaire

    SURUGA SEIKI

    This part is used as a rod stand. * The CAD data for this series is currently being modified. Please wait a short time until the modification has been completed.

    CAD
    2D
    à partir de
    17.41€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Barre, φ12

    Barre, φ12

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes. (PL-12-300M cannot be extended) Stainless steel components, apart from needle. - All lengths of products are available for the following four diameters: ø 8 mm, ø 12 mm, ø 20 m, and ø 30 mm - Bars without male screws and taps is also non-magnetic stainless steel; all lengths of products are available for ø 12 mm and ø 20 mm.

    CAD
    2D
    à partir de
    12.93€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Pieds réglables

    Pieds réglables

    CHUO PRECISION INDUSTRIAL

    Stand capable of fine vertical adjustment.

    CAD
    2D
    à partir de
    107.77€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Couleur

    Couleur

    CHUO PRECISION INDUSTRIAL

    [Features] - Used to prevent shifting in the perpendicular direction of a shaft that is fixed to the stand. - Since when this collar is fixed to the shaft, even if the stand's clamp screw wp is loosened, there is no shifting in the shaft (perpendicular) direction, it is easy to adjust in the optical axis within the transverse plane

    CAD
    2D
    à partir de
    11.90€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Colonne, φ20

    Colonne, φ20

    CHUO PRECISION INDUSTRIAL

    [Features] - Fastens all types of holder shafts, such as mirror holders. - Products for ø 8 mm, ø 12 mm, and ø 20 mm and by fastening heights (depths) are available. - Clamp screw is used to fasten the shaft and can be fastened from any of three places. - Collar (thickness 10 mm) that can change the direction with the height fixated is standardized. - Increases holding strength by disposing clamp screws at two locations (up and down) on products with a total length of 80 mm or longer.

    CAD
    2D
    à partir de
    33.29€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Colonne, φ8

    Colonne, φ8

    CHUO PRECISION INDUSTRIAL

    [Features] - Fastens all types of holder shafts, such as mirror holders. - Products for ø 8 mm, ø 12 mm, and ø 20 mm and by fastening heights (depths) are available. - Clamp screw is used to fasten the shaft and can be fastened from any of three places. - Collar (thickness 10 mm) that can change the direction with the height fixated is standardized. - Increases holding strength by disposing clamp screws at two locations (up and down) on products with a total length of 80 mm or longer.

    CAD
    2D
    à partir de
    25.66€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Barre, φ20

    Barre, φ20

    CHUO PRECISION INDUSTRIAL

    [Features] - A pole made of non-magentic stainless steel

    CAD
    2D
    à partir de
    35.24€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Tringles, φ30

    Tringles, φ30

    CHUO PRECISION INDUSTRIAL

    CAD
    2D
    à partir de
    38.99€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

Configurer

Réinitialiser

Affiner la recherche en spécifiant le fabricant

Marque

Activité produits circulation publique MISUMI

Affiner la recherche en précisant le type de données CAO

Sélectionner l'image

Fermer