• 10 millions de produits
  • Livraison le jour même pour 30.000 articles en stock
  • Prix concurrentiels

Nos horaires d'ouverture: 08:00-17:00 (Lun au Jeu) et 08:00-16:00 (Ven)

Recherche par
catégorie ou fournisseur

Recherche par catégorie
Composants mécaniques
Vis, boulons, rondelles, écrous
Semi-finis
Câbles et Connecteurs
Automatisme et Contrôles
Outils coupants
Fournitures industrielles
Manutention et Stockage
Protection individuelle – Hygiène & Sécurité
Laboratoires et Salles blanches
Composants pour la fabrication d'outils d'estampage
Composants pour la fabrication de moules d'injection

Recherche par marque
Marques représentées

Courroie de distribution

Nombre de jours d'expédition
  • Tous les articles
  • Jour même
  • 1 jour ou moins
  • 2 jours ou moins
  • 3 jours ou moins
  • 4 jours ou moins
  • 5 jours ou moins
  • 6 jours ou moins
  • 7 jours ou moins
  • 8 jours ou moins
  • 9 jours ou moins
  • Courroies ouvertes - Polyuréthane / Caoutchouc chloroprène
    Délai de livraison minimum
    2 jours
  • Couple élevé S3M

    Couple élevé S3M

    MITSUBOSHI BELTING

    It is an optimal belt in applications where smooth rotation is required with a high degree of accuracy. The Bare Back specification with little rubber powder scattering has become the standard. [Features] - Unique mold (will require special mold*.) Using it enables attachment of projections to the back surface of the belt that are optimally shaped for the conveyed article. - By doing one-piece molding, it makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - Since formation is done in a mold, support of large-volume orders is also possible.

    • Remise sur volume
    à partir de
    4.03€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution XL

    Courroie de distribution XL

    MITSUBOSHI BELTING

    A compact design is possible because it is lightweight and thin, as well as being flexible. The bare back specification with less rubber powder scattering is standard. [Features] - Special mold (*requires separate mold.) By using, the optimally shaped protrusion can be attached to the back of the belt for the conveyor belt . One-piece molding makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - Large-volume orders also possible since molds are used.

    • Remise sur volume
    à partir de
    3.53€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution L

    Courroie de distribution L

    MITSUBOSHI BELTING

    It is ideal for light load transmission requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - When used with special molds (*requires separate mold.) the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Protrusions will not peel off easily owing to its one-piece mold design. - Since colorable urethane is used, you can request for your preferred color. - Since molds are used, large-volume orders can be supported.

    • Remise sur volume
    à partir de
    8.26€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Plaques de serrage pour courroie - Anti-surpression, position de trou configurable
    à partir de
    17.30€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Couple élevé S5M

    Couple élevé S5M

    MITSUBOSHI BELTING

    It is an optimal belt in applications where smooth rotation is required with a high degree of accuracy. The Bare Back specification with little rubber powder scattering has become the standard. [Features] - Unique mold (will require special mold*.) Using it enables attachment of projections to the back surface of the belt that are optimally shaped for the conveyed article. - By doing one-piece molding, it makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - Since formation is done in a mold, support of large-volume orders is also possible.

    • Remise sur volume
    à partir de
    7.19€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Couple élevé S8M

    Couple élevé S8M

    MITSUBOSHI BELTING

    Can also be utilized widely in fields where chains and gears are used, with high transmission capacity rounded tooth belt. [Features] - Unique mold (*requires separate mold.) Protrusions with configuration optimized for items on conveyor belt can be attached to back surface of belt by use of unique mold (*requires separate mold.) - One-piece molding, so difficult for protrusions to peel off. - Colorable urethane used, so can be colored as you wish. - Molded, so large-volume orders also possible.

    • Remise sur volume
    à partir de
    13.56€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution H

    Courroie de distribution H

    MITSUBOSHI BELTING

    Synchronous transmission belt that overcomes the shortcomings of chains and gears. [Features] - Special mold (* additional mold required.) By using a special mold, you can attach the projection of optimum shape in the conveyed object to the back surface of the belt. - By doing one-piece molding, it makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - It is molded, so large-volume orders are also possible.

    • Remise sur volume
    à partir de
    17.17€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution T10

    Courroie de distribution T10

    MITSUBOSHI BELTING

    It is ideal for light load transmissions requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - When used with special molds (*requires separate mold.) the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Protrusions will not peel off easily owing to its one-piece mold design. - Since colorable urethane is used, you can request for your preferred color. - Since molds are used, large-volume orders can be supported.

    • Remise sur volume
    à partir de
    11.43€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Plaques de serrage de courroie de distribution - Type à fixation par écrou, simple
    à partir de
    6.80€
    Délai de livraison minimum
    Jour même

    Pour bénéficier de l'option "jour même", la commande doit être passée avant 16h00 (15h00 le vendredi).

    Articles en stock inclus

    *Prix unitaire/configuration de base

  • Courroie de distribution T5

    Courroie de distribution T5

    MITSUBOSHI BELTING

    It is ideal for light load transmissions requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - Protrusions of various shapes can be added to the back of the belt. - When used with special molds, the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Strength in protrusion peeling. - Protrusions will not peel off easily owing to its one-piece mold design. - Preferred colors can be specified. - Since colorable urethane is used, you can request for your preferred color. - Large volume orders can be supported. - Since molds are used, large-volume orders can be supported.

    • Remise sur volume
    à partir de
    4.09€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Couple élevé S2M

    Couple élevé S2M

    MITSUBOSHI BELTING

    It is an optimal belt in applications where smooth rotation is required with a high degree of accuracy. The Bare Back specification with little rubber powder scattering has become the standard.

    • Remise sur volume
    à partir de
    3.20€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution MXL/T80

    Courroie de distribution MXL/T80

    MITSUBOSHI BELTING

    It is ideal for light load transmissions requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - When used with special molds (*requires separate mold.) the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Protrusions will not peel off easily owing to its one-piece mold design. - Since colorable urethane is used, you can request for your preferred color. - Since molds are used, large-volume orders can be supported.

    • Remise sur volume
    à partir de
    2.71€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Plaques de serrage de courroie  - Anti-surpression, position de trou fixe
    à partir de
    10.90€
    Délai de livraison minimum
    Jour même

    Pour bénéficier de l'option "jour même", la commande doit être passée avant 16h00 (15h00 le vendredi).

    Articles en stock inclus

    *Prix unitaire/configuration de base

  • Plaques de serrage de courroie de distribution - Type à fixation d'écrou, double
    à partir de
    8.30€
    Délai de livraison minimum
    Jour même

    Pour bénéficier de l'option "jour même", la commande doit être passée avant 16h00 (15h00 le vendredi).

    Articles en stock inclus

    *Prix unitaire/configuration de base

  • Courroie  - Guides de Support
    Délai de livraison minimum
    7 jours
  • Courroies de distribution à couple élevé S3M

    Courroies de distribution à couple élevé S3M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    à partir de
    5.06€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Courroies de distribution à couple élevé S5M

    Courroies de distribution à couple élevé S5M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    à partir de
    8.52€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Couple élevé S14M

    Couple élevé S14M

    MITSUBOSHI BELTING

    Can also be utilized widely in fields where chains and gears are used, with high transmission capacity rounded tooth belt.

    à partir de
    86.04€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Courroies de distribution à couple élevé S2M

    Courroies de distribution à couple élevé S2M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    à partir de
    3.73€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution MXL

    Courroie de distribution MXL

    KATAYAMA CHAIN

    [Features] - Lightweight and high-speed rotation are possible compared to chain transmission. - No lubrication required. Clean power transmission with little noise

    à partir de
    3.48€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution T5

    Courroie de distribution T5

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    à partir de
    8.78€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Pas denté 2GT : 2mm, largeur de courroie : 4mm (courroie à faible production de particules) 2GT

    Pas denté 2GT : 2mm, largeur de courroie : 4mm (courroie à faible production de particules) 2GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 2 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Low dust-generating belt with special coating. - It does not disperse rubber powder. - Ideal for compact, precision equipment. - You can use it with 50 W – 200 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    à partir de
    5.19€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution XL

    Courroie de distribution XL

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    à partir de
    4.88€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Pas denté 1.5 GT : 1,5mm, largeur de courroie : 3mm (courroie à faible production de particules) 1.5 GT

    Pas denté 1.5 GT : 1,5mm, largeur de courroie : 3mm (courroie à faible production de particules) 1.5 GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 1.5mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Low dust-generating belt with special coating. - It does not disperse rubber powder. - Ideal for compact, precision equipment. - You can use it with a 10 W – 50 W motor. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    à partir de
    4.99€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Courroies de distribution à couple élevé S8M

    Courroies de distribution à couple élevé S8M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    à partir de
    18.14€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Courroies de distribution à couple extrême MTB

    Courroies de distribution à couple extrême MTB

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    à partir de
    29.55€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution XH

    Courroie de distribution XH

    MITSUBOSHI BELTING

    Synchronous transmission belt that overcomes the shortcomings of chains and gears.

    à partir de
    108.28€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution H

    Courroie de distribution H

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    à partir de
    24.07€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution T10

    Courroie de distribution T10

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    à partir de
    20.11€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution XXH

    Courroie de distribution XXH

    MITSUBOSHI BELTING

    Synchronous transmission belt that overcomes the shortcomings of chains and gears.

    à partir de
    180.92€
    Délai de livraison minimum
    32 jours

    *Prix unitaire/configuration de base

  • Pas denté 2GT : 2mm, largeur de courroie : 6 mm (courroie à faible production de particules) 2GT

    Pas denté 2GT : 2mm, largeur de courroie : 6 mm (courroie à faible production de particules) 2GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 2 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Low dust-generating belt with special coating. - It does not disperse rubber powder. - Ideal for compact, precision equipment. - You can use it with 50 W – 200 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    à partir de
    6.94€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Courroie de distribution L

    Courroie de distribution L

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    à partir de
    11.60€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Courroies de distribution à couple élevé S14M

    Courroies de distribution à couple élevé S14M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    à partir de
    107.81€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Pas denté 3 GT : 3mm, Largeur de courroie : 6mm 3 GT

    Pas denté 3 GT : 3mm, Largeur de courroie : 6mm 3 GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 3 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Ideal for compact, precision equipment. - You can use it with 100 W – 1,000 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    à partir de
    6.83€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Pas denté 3 GT : 3mm, largeur de courroie : 9mm 3 GT

    Pas denté 3 GT : 3mm, largeur de courroie : 9mm 3 GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 3 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Ideal for compact, precision equipment. - You can use it with 100 W – 1,000 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    à partir de
    9.44€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Courroie synchrone à couple élevé - 2GT / 3GT
    à partir de
    2.50€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Courroies d'entrainement à couple très élevé - EV5GT / EV8YU
    à partir de
    8.40€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Courroies d'entrainement à couple très élevé - MTS8M
    à partir de
    11.60€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Courroies synchrones - T5 / T10
    à partir de
    5.60€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Courroies de distribution - MXL, XL, L, H

    Courroies de distribution - MXL, XL, L, H

    MISUMI

    • Remise sur volume
    CAD
    2D3D
    à partir de
    2.40€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Courroie synchrone à couple élevé - S2M, S3M, S5M, S8M, S14M
    à partir de
    2.60€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Courroie synchrone à couple élevé - P

    Courroie synchrone à couple élevé - P

    MISUMI

    • Remise sur volume
    CAD
    2D3D
    à partir de
    4.00€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

Configurer

Réinitialiser

Stock

Affiner la recherche en précisant les spéc./dim.

Affiner la recherche en spécifiant le fabricant

Marque

Produits MISUMI
  • Produits compétitifs
Activité produits circulation publique MISUMI

Affiner la recherche en précisant le type de données CAO

Sélectionner l'image

Fermer