Tuyaux / accessoires pour tuyaux（Page 4）

?* À propos du délai d'expédition et des prix

• 

  Tube L anti-éclaboussures en polyuréthane souple

  CHIYODA TSUSHO

  A tube featuring sputtering resistance. Can also be used with air and cooling water.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	89.04 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyau jumelé L anti-éclaboussures en polyuréthane souple.

  CHIYODA TSUSHO

  [Features]
  · Directly inherits the features of the TE tube.
  · A sputter-preventing tube optimal for in-out piping

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	238.15 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Tube mince L anti-éclaboussures en polyuréthane souple

  CHIYODA TSUSHO

  Tube with flexibility in addition to sputtering resistance.
  
  [Features]
  · Achieves both sputtering resistance and flexibility. By thinning the outer skin of a conventional L-Flex tube, sputtering resistance is improved and excellent flexibility is provided.
  · Lightweight 25% lighter weight compared to conventional L-Flex tubing.
  · Excellent outer skin peeling properties. The outer skin is easier to peel and construction is easier than with conventional two-layer tubing

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	49.17 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyau souple L résistant aux éclaboussures modèle ALE

  CHIYODA TSUSHO

  A tube with a 3-layered structure. Features the best specifications among Chiyoda Tsusho’s tubes for sputtering.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	102.48 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tube anti-éclaboussures en polyuréthane gainé

  CHIYODA TSUSHO

  Sputter prevention tube which uses chloroprene rubber on the outer skin.
  
  [Features]
  · For air only; directly inherits the features of TP inner.
  · Wide range of color variation, which is convenient for pipe management.
  · Two-layer tube with chloroprene rubber used for the outer skin

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	98.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Coupe-tube TC-16【1-10 pièces par conditionnement】

  CHIYODA TSUSHO

  Easily cuts polyurethane, nylon, fluoropolymer tubes, etc.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	9.68 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Outil à dénuder pour retrait de gaine de tube résistant aux éclaboussures

  CHIYODA TSUSHO

  A 2-layer sputter resistant tube with a simple setting for effective peeling.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	60.97 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale résistant

  CHIYODA TSUSHO

  A high-repulsion spiral hose that prevents sagging.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	34.14 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Pour bobine résistante à flexible en spirale de protection contre les projections pour outils pneumatiques

  CHIYODA TSUSHO

  Sputter-preventing spiral tube with excellent flame retardant properties and oil resistance.
  
  [Features]
  · Long-life and durable against sparks, chipping, etc. as compared to spirals used in TPS, etc.
  · Suitable for air piping inside factories

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	42.39 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Conduite jaune de flexible d'air en spirale (modèle SPH)

  CHIYODA TSUSHO

  [Features]
  · Spiral tube with excellent flexibility and oil resistance

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	28.66 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible spiralé extra léger

  CHIYODA TSUSHO

  A thin, light and soft spiral tube.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	26.29 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible polyuréthane Chiyoda

  CHIYODA TSUSHO

  Soft hose suitable for low pressure robot piping.
  
  [Features]
  · Ultra-soft polyurethane hose: excellent flexibility; optimal for low pressure robot piping etc.
  · Simple hose fitting connection: very soft tube, very easy to connect to hose fitting.
  · Excellent oil resistance; optimal for plant air piping

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	45.53 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale linéaire

  CHIYODA TSUSHO

  A lightweight spiral hose with reduced tangling.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	37.18 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale 705 ultra-léger

  CHIYODA TSUSHO

  25% lighter than the manufacturer’s standard product. Nickel plating increases corrosion resistance.
  
  [Features]
  · Ultra-lightweight: Use of a special tube reduces weight by 25%.
  · Springiness and durability improved: Springiness and durability are improved through the use of a highly elastic urethane material.
  · Plated fittings: Corrosion resistance increased via nickel plated finish

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	32.20 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyau Toaron G

  KOKUGO

  Transparent tube with superior chemical resistance.
  
  [Features]
  · Has ultra-high elasticity, transparency, and superior cold resistance.
  · Has superior chemical resistance, weather resistance, ozone resistance, sulfidation resistance, and superior repeated compressibility characteristics.
  · The operating temperature range is -40℃ to +70℃

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	Jour même

• 

  Flexible en spirale, modèle GS

  MUROMOTO TEKKO

  Use at locations that require flow rate.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	83.99 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale, modèle SE

  MUROMOTO TEKKO

  This is used for general factory production lines with straight component lengthened on the manual side. Internal diameter of tube 5, external diameter of tube 8
  
  [Features]
  · Breakthrough air hose whose standard product has just φ28 mm outer diameter by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
  · Light and easy to handle thanks to φ28 mm outer diameter (standard type).
  · Thanks to the free expansion and contraction and its light weight (1/3 of rubber hose), the grip operation is easy and no fatigue feeling is given to workers.
  · It is highly resilient, and will not pose any problems from going through severe repeated testing that entails running over it with a truck, etc.
  ▪ 3 to 5 times abrasion resistance compared to rubber hose.
  ▪ Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine and benzaldehyde is used.
  ・Heat resistance 70°C .
  ▪ Cold-resistance: Does not lose its flexibility even at -10°C.
  ▪ Can withstand expansion/contraction tests performed at an air pressure of 0.7 MPa for more than 300, 000 times without any regularities.
  ▪ With smaller outer curling diameter and straight wires of a constant dimensions at both ends of the hose, the hose does not break even when handled roughly.
  ▪ As the hose color is pale green, it is easy on the eyes

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	42.20 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible torsadé Jumbo

  MUROMOTO TEKKO

  Semi-braided hose with a pressure resistance capable of withstanding air pressures up to 1.5 Mpa. Suitable for gas stations and car repair shops.
  
  [Features]
  ・
  · Light and easy to handle thanks to φ28 mm outer diameter (standard type).
  · Thanks to its ability to be freely expanded/contracted and its light weight (1/3 that of the rubber hose), grip operation is easy, helping alleviate fatigue in workers.
  · It is highly resilient, and stands up, problem-free, to repeated testing, including being run-over by trucks etc.
  ▪ Offers 3 to 5 times the abrasion resistance of the rubber hose.
  ▪ Chemical resistance (30 days): Uses material able to withstand almost all chemicals except hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, chlorine and benzaldehyde.
  · Heat resistance 70°C.
  ▪ Cold-resistance: Does not lose its flexibility, even at -10°C.
  ▪ Can withstand over 300, 000 expansion/contraction tests performed at air pressures of 0.7 MPa without displaying any abnormalities.
  ▪ With a small outer curling diameter and straight wires with set dimensions at both ends of the hose, the hose will not break, even when handled roughly.
  · Its pale green color is easy on the eyes.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	77.47 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible droit

  MUROMOTO TEKKO

  Can be used separately. Tube with 5-mm internal diameter x 8-mm external diameter; available cut lengths: 2 m, 3 m, 5 m, 7 m, and 10 m.
  
  [Features]
  · Breakthrough air hose with an outer diameter of just 28 mm achieved by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
  · Light and easy to handle thanks to the 28 mm outer diameter (standard type).
  · Thanks to the free expansion and contraction and lightweight (1/3rd rubber hose), the product is easy to grip.
  · It is highly resilient, and will withstand severe repeated application of force, such as running over it with a truck.
  · Abrasion resistance three to five times superior than a rubber hose.
  · Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine, and benzaldehyde.
  · Heat resistance: 70°C .
  · Cold-resistance: Does not lose flexibility even at -10°C.
  · Can withstand expansion/contraction performed at air pressure of 0.7 MPa more than 300, 000 times without any abnormalities.
  · With smaller outer curling diameter and straight tubing of a constant dimension at both ends of the hose, the hose does not break even when handled roughly.
  · Attractive pale green color.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale étirable, modèle LS

  MUROMOTO TEKKO

  The thick middle curl is highly extensible, giving it good operability when a given flow rate is necessary. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.94 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale en vrac avec dispositif d'équilibrage

  MUROMOTO TEKKO

  Curled hose with a balancer function; optimal for small air tools. No need for a cord reel or balancer. Hose expansion and retraction range: 300 mm. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	63.60 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Mini flexible en spirale

  MUROMOTO TEKKO

  The roll outer diameter is smaller and finished at φ 15 mm, and can be used for performing embedding in the movable parts of industrial systems, medical systems, automated equipment, etc. The internal diameter of the tube is 3 and the external diameter of the tube is 5
  
  [Features]
  · The curl hose is a revolutionary air hose whose standard product has only a φ28 mm outer diameter due to rolling of a pure urethane foam tube that takes advantage of the characteristics of thermoplastic polyurethane resin.
  · Can be used for medical equipment, hairdressing equipment, and industrial equipment

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	36.64 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible en spirale à paroi épaisse

  MUROMOTO TEKKO

  Wide wound diameter at φ56mm; the coiled part can be extended up to 10 times its length, allowing a wide range of applications. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.78 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible torsadé étirable, diamètre épais, modèle GSL

  MUROMOTO TEKKO

  Suited for work requiring a short total length in the curled part and a large flow rate (when the flow rate of the current hose is insufficient). Tube internal diameter × external diameter = 8 × 12

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	91.89 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Uréthane pour pneumatique générale (modèle haute pression) U1

  NITTA

  [Features]
  ▪ U2 tube can be used even at high pressure range.
  ▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold under high temperature and humidity.
  ▪ Coil processing and weld processing is possible.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.36 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Uréthane pour pneumatique générale (super flexible) U5

  NITTA

  [Features]
  ▪ Among all urethane tubes, the U5 urethane tube has the least bending stress and excellent workability.
  ▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold at high temperature and humidity.
  ▪Barb fittings (bamboo shoot joints) can be used.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	12.15 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tube à plusieurs conduites en uréthane UML

  NITTA

  Urethane multi-line tube UML is a urethane tube "U2" is a multiple welding processed tube.
  
  [Features]
  ・The urethane tube "U2" is a multiple installed tube

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	6.08 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tuyau flexible en résine fluorée 2 couches pour revêtement (souple, résistant à l'abrasion) TES

  NITTA

  Two-layer structure consisting of inside layer (special fluororesin) + outer layer (special nylon resin). Excellent in flexibility and suitable for movable piping such as robots. Semi-transparent, so fluids can be visually checked.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	65.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube antistatique UE pour pneumatique générale (conductivité)

  NITTA

  [Features]
  · Conductive polyurethane elastomer is used in this antistatic tube UE.
  · Does not accumulate static electricity, and prevents sparks (Surface resistance: 105 to 103 Ohms).
  · Excellent flexibility.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	40.57 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coupe-tube TC

  NITTA

  The TC tube cutter cuts tubes up to 13 mm.
  
  [Features]
  TC04
  ▪ Compact and lightweight tube cutter is easy to carry.
  ▪ Possible to replace only the blade part.
  ▪ Three razor blades.
  TC01
  ▪ Nipper type durable cutter exclusively for tubes.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	25.43 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Dévidoir de tube PTR

  NITTA

  [Features]
  ▪ It is easy to handle the tube reel PTR.
  ▪ Recycled polypropylene resin is used as the material.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	8.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube spiral en nylon S

  NITTA

  A highly resilient nylon coil tube S that does not elongate easily by losing elasticity.
  
  [Features]
  · A coil tube that is highly resilient and does not elongate easily by losing elasticity.
  · The tubes have superior heat resistance.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	65.52 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube ignifuge pour soudage par point de tuyauterie FS

  NITTA

  Flame retardant tube FS has excellent self-extinguishing capabilities corresponding to UL94 Standard V-0. Excellent flexibility due to single layer structure. Marking is added to total length for indicating insert length.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.57 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube ignifuge pour soudage par point de tuyauterie (flexible) FWU

  NITTA

  Superior in self-extinguishing due to external layer of flame retardant resin (UL94 Standard V-0 equivalent) provided. Internal layer uses ether type polyurethane resin to minimize erosion and degradation due to moisture or mold under high temperature/high humidity conditions.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	108.39 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube en résine fluorée pour produits propres résistant à la chaleur, aux basses températures et à la corrosion TA

  NITTA

  A tube made of PFA resin, which has superb chemical resistance. The tube is easily washable and allows minimum fluid adhesion. · Manufactured in a clean room, the tube ends are sealed with caps and shipped in heat-sealed packaging.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	58.55 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tube en résine fluorée pour produits TP propres résistant à la chaleur, aux basses températures et à la corrosion

  NITTA

  The fluorine resin tube clean TP is a tube of FEP (tetrafluoride ethylene-hexafluoride propylene polymer) resin with superior chemical resistance, providing excellent washability, low levels of adhesion of chemical solutions, etc., and excellent weather resistance.
  
  [Features]
  · Uses FEP (tetrafluoride ethylene-hexafluoride propylene copolymer) resin with excellent chemical resistance.
  · Manufactured in a clean room. Tube ends are capped and sealed. Shipped in heat-sealed packaging.
  · Cleaning performance is excellent, and adhesion of chemical solutions, etc. is very low.
  · Can be used with the "Chemifit C1 series" clean PushOne fitting .
  · This is a tube with small secular change and excellent weather resistance.
  · Can be used in an ozone atmosphere, etc.
  · Health, Labor and Welfare Ministry Notification No. 201 (2006

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	105.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Pince coupante pour flexible HC

  NITTA

  The Hose Cutter HC is capable of cutting all types of hoses. A hole for a fixing bolt is on the pedestal, making it possible to fix the cutter in place.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	135.53 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube en résine polyoléfine pour plomberie propre (flexible) PL

  NITTA

  [Features]
  · A clean tube suitable for equipment and applications with fluids such as clean air, N2 gas, pure water, and various chemicals fluids.
  · Environmentally friendly eco-type tube.
  · Only carbon dioxide generated when it is incinerated (750°C); no toxic gases such as nitrogen oxides (Nox) and sulfur oxides (Sox) are produced. No dioxin is generated at all.
  · Manufactured in a clean room. Tube ends are capped and sealed. Shipped in heat-sealed packaging.
  · Special polyolefin resin with high water barrier performance and flexibility.
  · Low cost compared to fluorocarbon resin tubes.
  · Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	27.20 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyau FEP Yodo-Fluoron (polymère fluoré)

  YODOGAWA HU-TECH

  A fluororesin polymer (FEP) tube. Excels in permeation resistance.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	51.77 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube spaghetti CHUKOH FLO, tuyau en PTFE (taille en mm)

  CHUKOH CHEMICAL INDUSTRIES

  Fluororesin tube with excellent heat resistance, chemical resistance, non-viscous properties, and electrical insulation properties.
  
  [Features]
  · Thin tubular product made of various fluororesins.
  · Product has superior heat resistance, non-viscous, chemical resistance, and electrical insulation properties, and is used in various industries

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	78.34 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Tube résistant aux projections JUNFLON (tube pour appareil de soudage par points) JUNFLON SP4 (tube résistant aux projections double couche)

  JUNKOSHA

  By using a double tube with overlapped special resins that are flame resistant, sparks can be prevented. High flexibility, with excellent weather and water resistance.
  
  [Features]
  ▪ Standard colors: black, red, blue, green, white, yellow, light beige, light red, light green (yellow, light beige, light red, light green with a 100-m roll only).
  ▪ The equipment can be implemented as a piping tube of spot welded equipment where noncombustible resin (exact UL94V-0) is used in the outer layer.
  ▪ By using the exclusively applied stripper (that comes with tube cutter), it is possible to insert the equipment into the Junlon one-touch fitting W series and it is also possible to detach the speedy outer layer that complies with the infixing.
  ▪ Moreover, the pitch of the infixing in the outer layer is displayed and the length of its detachment is easily visible.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	55.70 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube résistant aux projections JUNFLON (tube pour appareil de soudage par points) JUNFLON SPF (tube résistant aux projections triple couche)

  JUNKOSHA

  Exhibits excellent durability against sparks and shocks generated from welding equipment. High flexibility, and with excellent weather and water resistance.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	107.32 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Tube JUNFLON (tube en polymère fluoré) Tube JUNFLON FT (tube spiralé en polymère fluoré PFA)

  JUNKOSHA

  [Features]
  ·A fitting with a superior heat/low-temperature resistance.
  · Non-load continuous operating temperatures: PFA < -65–260℃/FEP < -65–200℃.
  · Inert to most of chemicals and solvents.
  · This fitting has superior weather resistance and resistance to ageing.
  · Adhesion-resistant and easy to keep clear.
  · Flame retardant.
  · Superior electrical characteristics.
  · No risk of toxic substance elution.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	49.51 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube JUNFLON PFA haute barrière

  JUNKOSHA

  A hybrid tube that uses a fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer. The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
  
  [Features]
  · A fluoropolymer tube with superior barrier properties.
  · A hybrid tube that uses fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer.
  · The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
  · The barrier properties of the fluoropolymer is superior to the barrier properties of the acids (hydrochloric acid, nitric acid, etc.) and ammonia.
  · Suppresses the permeation of acids in comparison to conventional PFA tubing.
  · Reduces adverse environmental impacts on the wider environment.
  · The transparency of the fluid can be maintained over a long period of time.
  · The mechanical properties are equivalent to a conventional PFA tubing.
  · This product is manufactured from raw material input to the molding and packaging in a consistently managed clean environment.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	30.01 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  JUNRON A (tube en nylon) JUNRON AC1 (tube de contrôle en nylon souple)

  JUNKOSHA

  Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Excels in heat and low temperature resistance. High flexibility. Excels in oil resistance and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	200.80 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

Loading...