Raccords en résine fluorée（Vis d'assemblage nominale M (M1)：3/8B）

?* À propos du délai d'expédition et des prix

• 

  Raccord PILLAR de type Super 300, coude mâle

  PILLAR

  The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
  ◆ Reduction in tightening torque by updated sealing mechanism
  Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
  ◆ Greatly enhanced workability due to simplified tightening control
  The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
  ◆ Excellent sealing performance
  Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
  ◆ Radical reduction in micro-bubble and liquid accumulation
  Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
  ◆ high working pressure/temperature
  The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	60.39 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Raccords en résine fluorée - Connecteur fileté / connecteur traversant

  MISUMI

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	17.36 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord PILLAR de type Super 300, connecteur mâle

  PILLAR

  The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
  ◆ Reduction in tightening torque by updated sealing mechanism
  Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
  ◆ Greatly enhanced workability due to simplified tightening control
  The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
  ◆ Excellent sealing performance
  Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
  ◆ Radical reduction in micro-bubble and liquid accumulation
  Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
  ◆ high working pressure/temperature
  The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	105.55 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ3 / Coude femelle / Taille métrique

  SMC

  Female elbow with flare-type collet construction.
  [Features]
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	33.58 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en résine fluorée - Coude à 90°, filetage

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.79 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  LQ1H, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à connecteur

  SMC

  A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	23.84 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en plastique fluoré / Raccord de tuyauterie en polymère fluoré / Série LQ1 / Filetage mâle / Taille en pouces

  SMC

  A fluoropolymer male connector fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.69 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Filetage interne / Taille métrique

  SMC

  A fluoropolymer female connector fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	36.60 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Filetage interne / Taille en pouces

  SMC

  A fluoropolymer female connector fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	36.98 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1L, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à raccord

  SMC

  A fluoropolymer male elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.37 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1L, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à raccord

  SMC

  A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.15 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude femelle / Taille métrique

  SMC

  A fluoropolymer female elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	41.35 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude avec filetage femelle / taille impériale

  SMC

  A fluoropolymer female elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	41.31 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1R, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Té en bout

  SMC

  A fluoropolymer fitting with a quadruple-sealing construction.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C
  · The trapezoidal thread allows for the application of high levels of torque. The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.15 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1R-M, Té mâle en bout Raccords en fluoropolymère / Hyper raccords en pouces

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.15 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té femelle / Taille métrique

  SMC

  A fluoropolymer female run tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	142.00 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1R-F, Té femelle en bout Raccords en fluoropolymère / Hyper raccords en pouces

  SMC

  A fluoropolymer female run tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	57.76 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té mâle / taille métrique

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.15 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1B-M, Té de branchement mâle Raccords en fluoropolymère / Hyper raccords en pouces

  SMC

  A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	47.71 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / T femelle / taille métrique

  SMC

  A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	57.76 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1B-F, Raccords en té femelle en pouces en fluoropolymère / Hyper raccords

  SMC

  A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	57.76 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3-M/F, Raccord spécial, haute pureté, type évasé, raccord fileté

  SMC

  A fluoropolymer fitting with a flared collet structure.
  [Features]
  · Triple-seal construction.
  · Excellent assemblability.
  · Excellent flow-through characteristics.
  · Able to withstand thermal stress.
  · For use at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	13.85 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ3 / Filetage mâle / Taille en pouces

  SMC

  A fluoropolymer male connector with excellent assemblability.
  [Features]
  · A flared collet structure.
  · Triple-seal construction.
  · Excellent assemblability.
  · Excellent flow-through characteristics.
  · Able to withstand thermal stress.
  · For use at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	15.52 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ3 / Filetage femelle / Taille métrique

  SMC

  A metric size female connector.
  [Features]
  · A fluoropolymer fitting.
  · A flared collet structure.
  · Triple-seal construction.
  · Excellent assemblability.
  · Excellent flow-through characteristics.
  · Able to withstand thermal stress.
  · For use at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.66 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords en fluoropolymère / Série LQ3 / Filetage femelle / Taille en pouces

  SMC

  An inch size female connector.
  [Features]
  · A fluoropolymer fitting.
  · A flared collet structure.
  · Triple-seal construction.
  · Excellent assemblability.
  · Excellent flow-through characteristics.
  · Able to withstand thermal stress.
  · For use at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	33.40 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3L-M, Raccord spécial, haute pureté, type évasé, raccord fileté

  SMC

  A male elbow fluoropolymer fitting that can withstand thermal stress.
  [Features]
  · A flared collet structure.
  · Triple-seal construction.
  · Excellent assemblability.
  · Excellent flow-through characteristics.
  · Able to withstand thermal stress.
  · For use at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	18.24 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3L-M, Raccord spécial, haute pureté, type évasé, raccord fileté

  SMC

  A male elbow fluoropolymer fitting that can withstand thermal stress.
  [Features]
  · A flared collet structure.
  · Triple-seal construction.
  · Excellent assemblability.
  · Excellent flow-through characteristics.
  · Able to withstand thermal stress.
  · For use at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.47 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ3 / Coude femelle / Taille en pouces

  SMC

  Inch size female elbow.
  [Features]
  · Fluoropolymer fitting.
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.77 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ3 / Té mâle / Taille métrique

  SMC

  Fluoropolymer fittings from SMC Corporation.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.
  [Applications]
  · For joining tubes during piping assembly.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	30.31 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3B-M, Raccord spécial, haute pureté, type évasé, raccord fileté, pouce

  SMC

  Fluoropolymer fittings from SMC Corporation.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.
  [Applications]
  · For joining tubes during piping assembly.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	51.45 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3B-F, Raccord spécial, haute pureté, type évasé, raccord fileté, métrique

  SMC

  Metric size female branch tee.
  [Features]
  · Fluoropolymer fitting with a flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	45.65 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3B-F, Raccord spécial, haute pureté, type évasé, raccord fileté, pouce

  SMC

  Heat-stress resistant fluoropolymer pipe fitting.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	60.35 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3R-M, Raccord spécial, haute pureté, type évasé, raccord fileté, métrique

  SMC

  Fluoropolymer fittings from SMC Corporation.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.
  [Applications]
  · For joining tubes during piping assembly.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.24 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3R-M, Raccord spécial, haute pureté, type évasé, raccord fileté, pouce

  SMC

  Fluoropolymer fittings from SMC Corporation.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.
  [Applications]
  · For joining tubes during piping assembly.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	37.50 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3R-F, Raccord spécial, haute pureté, type évasé, raccord fileté, métrique

  SMC

  A fluoropolymer fitting with excellent flow-through characteristics thanks to its flare-type collet construction.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	47.10 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ3R-F, Raccord spécial, haute pureté, type évasé, raccord fileté, pouce

  SMC

  A fluoropolymer fitting with excellent flow-through characteristics thanks to its flare-type collet construction.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	60.37 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQHB, Diamètre métrique du connecteur traversant en fluoropolymère

  SMC

  A fluoropolymer fitting that allows free positioning.
  [Features]
  · Tubes pass through the fitting body, and can thus be set in any position.
  · Can be used in pressure feed of chemical liquids, etc., during the production process of semiconductors.
  · Can be used with chemical liquids such as acid, alkali and deionized water.
  · Material: New PFA (main body, nut), PTFE (collet).

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.89 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQHB, Connecteur à alésage traversant en fluoropolymère Taille en pouces

  SMC

  A fluoropolymer fitting tubes pass through the fitting body, enabling it to be set in any position.
  [Features]
  · Can be used in pressure feed of chemical liquids, etc., during the production process of semiconductors.
  · Can be used with chemical liquids such as acid, alkali and deionized water.
  

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.77 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccord en T en résine fluorée F-MBT

  NIHON PISCO

  Offre une étanchéité et une résistance à l'arrachement élevées. Une bague d'impact maintient fermement le tuyau.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	39.85 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

Loading...