• 10 millions de produits
  • Livraison le jour même pour 30.000 articles en stock
  • Prix concurrentiels

Nos horaires d'ouverture: 08:00-17:00 (Lun au Jeu) et 08:00-16:00 (Ven)

Recherche par
catégorie ou fournisseur

Recherche par catégorie
Composants mécaniques
Vis, boulons, rondelles, écrous
Semi-finis
Câbles et Connecteurs
Automatisme et Contrôles
Outils coupants
Fournitures industrielles
Manutention et Stockage
Protection individuelle – Hygiène & Sécurité
Laboratoires et Salles blanches
Composants pour la fabrication d'outils d'estampage
Composants pour la fabrication de moules d'injection

Recherche par marque
Marques représentées

Tiges en résine

  • Tiges en résine - Configurable
    Délai de livraison minimum
    3 jours
  • Barre résine - Surface extérieure brute
    Délai de livraison minimum
    3 jours
  • Tiges de précision en résine
    Délai de livraison minimum
    4 jours
  • Tiges rondes en nylon MC

    Tiges rondes en nylon MC

    AKITSU INDUSTRY

    MC nylon is a tough material that can be used in a wide range of applications even in the field of engineered plastics, and possesses high impact resistant mechanical strength. - It has excellent durability since it is chemical-resistant, self-lubricating and has excellent resistant against oil and organic solvents. - Outer diameter (ø): 20, 30, 40, 50 - Length (mm): 1000

    à partir de
    38.38€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Barres rondes POM-NH (homopolymère (Delrin))

    Barres rondes POM-NH (homopolymère (Delrin))

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    7.63€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC901

    Barres rondes MC901

    QUADRANT POLYPENCO JAPAN

    MC nylon is used in a variety of industrial applications, and it is the most versatile material among engineered plastics. - It has an excellent mechanical strength to wear resistance ratio.

    à partir de
    6.20€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Barres rondes POM-NC (naturel)

    Barres rondes POM-NC (naturel)

    QUADRANT POLYPENCO JAPAN

    - The dimensional tolerance of cut items is different from the ones listed in the manufacturer's catalog.

    à partir de
    2.53€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Barres rondes POM-NC sans centre Minus Tolerance Product (naturel)

    Barres rondes POM-NC sans centre Minus Tolerance Product (naturel)

    QUADRANT POLYPENCO JAPAN

    Polypenco acetal is an engineering plastic material with high crystallinity with acetal copolymer and homopolymer materials. Excellent resistant to fatigue

    à partir de
    5.20€
    Délai de livraison minimum
    10 jours

    *Prix unitaire/configuration de base

  • Barres rondes POM-BC (noires)

    Barres rondes POM-BC (noires)

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    2.63€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Barres rondes Ketron CA30 PEEK

    Barres rondes Ketron CA30 PEEK

    QUADRANT POLYPENCO JAPAN

    [Features] - Ketoron PEEK is a material that is formed by extruding polyether ether ketone resin (PEEK) and is a super thermoplastic engineering plastic that is well-balanced for a continuous operating temperature of 250°C, and chemical resistance, mechanical coating properties, machinability, etc.

    à partir de
    103.47€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes PE-UHMW de barre de liaison 1000NA

    Barres rondes PE-UHMW de barre de liaison 1000NA

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    11.88€
    Délai de livraison minimum
    10 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC703HL

    Barres rondes MC703HL

    QUADRANT POLYPENCO JAPAN

    [Features] - MC nylon improves the nylon's qualities by polymerizing and molding nylon monomers, the main raw material, under high pressure and possesses qualities that are excellent for injection-molded and extrusion-molded products.

    à partir de
    23.71€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes ROD ororésine PFA SWP-R/51-SWP-R

    Barres rondes ROD ororésine PFA SWP-R/51-SWP-R

    GUNZE

    Thermofused round bar extruded from fluororesin, can be used as welding material or machining material. [Features] - Continuous molding of long products now possible!! - Thermofused fluororesin extrusion molded round bar.

    • Remise sur volume
    à partir de
    23.22€
    Délai de livraison minimum
    4 jours

    *Prix unitaire/configuration de base

  • Barres rondes Ketron GF30 PEEK

    Barres rondes Ketron GF30 PEEK

    QUADRANT POLYPENCO JAPAN

    Ketron PEEK, a material that is produced by extruding polyether ether ketone resin (PEEK); it is a well-balanced thermoplastic super engineering resin that has a 250°C temperature of continuous operation, chemical resistance, mechanical coating performance and machining, etc.

    à partir de
    96.96€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Techtron HPV PPS

    Barres rondes Techtron HPV PPS

    QUADRANT POLYPENCO JAPAN

    [Features] - Techtron HPVPPS is a product with greatly improved sliding that is based on PPS with excellent heat and chemical resistance. - It can be applied to parts that slide at high temperatures, or for applications with high PV values.

    à partir de
    62.28€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes POM-HL

    Barres rondes POM-HL

    QUADRANT POLYPENCO JAPAN

    Polypenco acetal is an engineering plastic material with high crystallinity with acetal copolymer and homopolymer materials. Excellent resistant to fatigue

    à partir de
    34.07€
    Délai de livraison minimum
    Devis

    *Prix unitaire/configuration de base

  • Tiges rondes Nylatron PA66

    Tiges rondes Nylatron PA66

    QUADRANT POLYPENCO JAPAN

    Nylatron PA66 is a Nylon 66 material with excellent thermoplasticity and crystallinity. Tough physical properties, especially suitable for small machine parts.

    à partir de
    5.04€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Ertalyte PET-P

    Barres rondes Ertalyte PET-P

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    7.69€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Duratron U1000 PEI

    Barres rondes Duratron U1000 PEI

    QUADRANT POLYPENCO JAPAN

    Duratron PEI is a polyamide-imide (PAI) resin material that can be extrusion / compression molded. It is an engineering plastic with a continuous use temperature of 170°C.

    à partir de
    19.32€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC501CD R6

    Barres rondes MC501CD R6

    QUADRANT POLYPENCO JAPAN

    [Features] - MC nylon improves the nylon's qualities by polymerizing and molding nylon monomers, the main raw material, under high pressure and possesses qualities that are excellent for injection-molded and extrusion-molded products.

    à partir de
    12.27€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Tiges MC9-SC

    Tiges MC9-SC

    QUADRANT POLYPENCO JAPAN

    Polypenco Tough-Rod is a round bar of a composite material docking MC nylon and steel using an independent high frequency fusion method.

    à partir de
    76.43€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC501CD R2

    Barres rondes MC501CD R2

    QUADRANT POLYPENCO JAPAN

    MC nylon is improved by polymerizing/synthesizing the nylon monomers, the main raw material, under high pressure, which gives it qualities that are excellent for injection-molded and extrusion-molded products.

    à partir de
    19.56€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Duratron T4301 PAI

    Barres rondes Duratron T4301 PAI

    QUADRANT POLYPENCO JAPAN

    Duratron Tron PAI is a polyamide-imide (PAI) resin material that can be extrusion / compression molded. It is a super engineering plastic with a continuous use temperature of 250°C.

    à partir de
    71.85€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Plaque Techtron 1000 PPS

    Plaque Techtron 1000 PPS

    QUADRANT POLYPENCO JAPAN

    Techtron 1000PPS is an extruded polyphenylene sulfide (PPS) resin fiber with a heat-resistant temperature of 220°C. It is an engineering thermoplastic with both chemical resistance and structural stability.

    à partir de
    80.57€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Ertalyte TX PET-P

    Barres rondes Ertalyte TX PET-P

    QUADRANT POLYPENCO JAPAN

    Ertalyte PET-P, a polyethylene terephthalate resin, is the raw material of the implant and has particularly good sliding properties.

    à partir de
    25.27€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC602ST

    Barres rondes MC602ST

    QUADRANT POLYPENCO JAPAN

    [Features] - MC nylon improves the nylon's qualities by polymerizing and molding nylon monomers, the main raw material, under high pressure and possesses qualities that are excellent for injection-molded and extrusion-molded products.

    à partir de
    69.85€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes PBI

    Barres rondes PBI

    QUADRANT POLYPENCO JAPAN

    Polypenco PBI is a compression molded material of a polybenzoyl resin, which has the highest heat resistance among plastics and exhibits mechanical strength.

    à partir de
    64.35€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Tiges MC9-FC

    Tiges MC9-FC

    QUADRANT POLYPENCO JAPAN

    Polypenco Tough-Rod is a round bar of a composite material docking MC nylon and steel using an independent high frequency fusion method.

    à partir de
    84.37€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • POM-BC Barres rondes sans centre, produit à tolérance inférieure (noir)

    POM-BC Barres rondes sans centre, produit à tolérance inférieure (noir)

    QUADRANT POLYPENCO JAPAN

    Polypenco acetal is an engineering plastic material with high crystallinity with acetal copolymer and homopolymer materials. Excellent resistant to fatigue

    à partir de
    5.42€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Symalit PVDF

    Barres rondes Symalit PVDF

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    3,291.75€
    Délai de livraison minimum
    13 jours

    *Prix unitaire/configuration de base

  • Tiges MC9-SUS

    Tiges MC9-SUS

    QUADRANT POLYPENCO JAPAN

    Polypenco Tough-Rod is a round bar of a composite material docking MC nylon and steel using an independent high frequency fusion method.

    à partir de
    147.42€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Tiges rondes MC500AS R11

    Tiges rondes MC500AS R11

    QUADRANT POLYPENCO JAPAN

    [Features] - MC nylon improves the nylon's qualities by polymerizing and molding nylon monomers, the main raw material, under high pressure and possesses qualities that are excellent for injection-molded and extrusion-molded products.

    à partir de
    32.37€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC900NC

    Barres rondes MC900NC

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    21.31€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes PFA en résine fluorée ROD/Rubans NSP-R

    Barres rondes PFA en résine fluorée ROD/Rubans NSP-R

    GUNZE

    Thermofused round bar/ribbon extruded from fluororesin, can be used as welding material or machining material. [Features] - Continuous molding of long products now possible!! - Thermofused fluororesin extrusion molded round bar.

    Délai de livraison minimum
    5 jours
  • Barres rondes BST-NA

    Barres rondes BST-NA

    MITSUBOSHI BELTING

    Polyacetal is resin material which is resistant to organic solvent and has general mechanical properties such as (1) small coefficient of friction, (2) great friction resistance with self-lubricating property, (3) high rigidity with great elasticity. Round bars with various nominal diameters from φ20 to φ200.

    à partir de
    40.85€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Nylon pour moulage NB, tiges rondes

    Nylon pour moulage NB, tiges rondes

    MITSUBOSHI BELTING

    This Mitsuboshi cast nylon has five properties; (1) small coefficient of friction, (2) great friction resistance and self-lubricating, (3) insoluble against most alkali and organic solvent, (4) exceptional oil resistance, (5) excellent resin material with small internal strain. Plates with various thickness from 5 t to 120 t.

    • Remise sur volume
    à partir de
    65.74€
    Délai de livraison minimum
    8 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC501CD R9

    Barres rondes MC501CD R9

    QUADRANT POLYPENCO JAPAN

    MC nylon is improved by polymerizing/synthesizing the nylon monomers, the main raw material, under high pressure, which gives it qualities that are excellent for injection-molded and extrusion-molded products.

    à partir de
    45.43€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes POM Hyper (POM-NC (HY))

    Barres rondes POM Hyper (POM-NC (HY))

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    27.62€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Semitron ESd225 POM-C

    Barres rondes Semitron ESd225 POM-C

    QUADRANT POLYPENCO JAPAN

    Semitron is a permanent anti-static high-tech material, and is available with 7 different kinds of base polymers in order to cover a wide temperature range.

    à partir de
    17.76€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Duratron T4203 PAI

    Barres rondes Duratron T4203 PAI

    QUADRANT POLYPENCO JAPAN

    [Features] - Duratron PAI is a polyamide-imide (PAI) resin material that can be extrusion / compression molded. It is a super engineering plastic with a continuous use temperature of 250°C.

    à partir de
    71.85€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes MC801

    Barres rondes MC801

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    22.14€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

  • Barres rondes Duratron U2300 PEI

    Barres rondes Duratron U2300 PEI

    QUADRANT POLYPENCO JAPAN

    [Caution] Please verify the customer's receiving setup in regards to products of 30kg or more.

    à partir de
    81.15€
    Délai de livraison minimum
    12 jours

    *Prix unitaire/configuration de base

Configurer

Réinitialiser

Affiner la recherche en précisant les spéc./dim.

Affiner la recherche en spécifiant le fabricant

Marque

Produits MISUMI
  • Produits compétitifs
Activité produits circulation publique MISUMI

Affiner la recherche en précisant le type de données CAO

Sélectionner l'image

Fermer