Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.
Référence pièce
|
---|
EPHB0.5-[40-100/0.01]-P[0.4-0.49/0.01] |
EPHB0.6-[40-100/0.01]-P[0.5-0.59/0.01] |
EPHB0.7-[40-100/0.01]-P[0.6-0.69/0.01] |
EPHB0.8-[40-150/0.01]-P[0.7-0.79/0.01] |
EPHB0.9-[40-150/0.01]-P[0.8-0.89/0.01] |
EPHB1-[40-200/0.01]-P[0.9-0.99/0.01] |
EPHB1.5-[40-200/0.01]-P[1-1.49/0.01] |
EPHB2-[40-250/0.01]-P[1.5-1.99/0.01] |
EPHB2.5-[40-300/0.01]-P[2-2.49/0.01] |
EPHB3-[40-300/0.01]-P[2.5-2.99/0.01] |
EPHB3.5-[40-300/0.01]-P[3-3.49/0.01] |
EPHB4-[40-300/0.01]-P[3.5-3.99/0.01] |
EPHB4.5-[40-350/0.01]-P[4-4.49/0.01] |
EPHB5-[40-350/0.01]-P[4.5-4.99/0.01] |
EPHB5.5-[40-350/0.01]-P[5-5.49/0.01] |
EPHB6-[40-350/0.01]-P[5.5-5.99/0.01] |
EPHB6.5-[40-350/0.01]-P[6-6.49/0.01] |
EPHB7-[40-350/0.01]-P[6.5-6.99/0.01] |
EPHB8-[40-350/0.01]-P[7-7.99/0.01] |
EPHB10-[40-350/0.01]-P[8-9.99/0.01] |
EPHB12-[40-350/0.01]-P[10-11.99/0.01] |
EPHJB4-[40-300/0.01]-P[3.5-3.99/0.01] |
EPHJB4.5-[40-350/0.01]-P[4-4.49/0.01] |
EPHJB5-[40-350/0.01]-P[4.5-4.99/0.01] |
EPHJB5.5-[40-350/0.01]-P[5-5.49/0.01] |
EPHJB6-[40-350/0.01]-P[5.5-5.99/0.01] |
EPHJB6.5-[40-350/0.01]-P[6-6.49/0.01] |
EPHJB7-[40-350/0.01]-P[6.5-6.99/0.01] |
EPHJB8-[40-350/0.01]-P[7-7.99/0.01] |
EPHJB10-[40-350/0.01]-P[8-9.99/0.01] |
EPHJB12-[40-350/0.01]-P[10-11.99/0.01] |
EPYB0.4-[20-60/0.01]-P[0.3-0.395/0.005] |
EPYB0.5-[20-60/0.01]-P[0.4-0.495/0.005] |
EPYB0.6-[20-60/0.01]-P[0.5-0.595/0.005] |
EPYB0.7-[20-60/0.001]-P[0.6-0.695/0.005] |
EPYB0.8-[20-60/0.01]-P[0.7-0.795/0.005] |
EPYB0.9-[20-60/0.01]-P[0.8-0.895/0.005] |
EPYB1-[20-60/0.01]-P[0.9-0.995/0.005] |
Référence pièce | Quantité minimale de commande | Remise sur volume | RoHS | Tolérance du diamètre de l'arbre (tolérance de référence) | Tolérance de la dimension L (tolérance de référence) | Epaisseur de la tête | D/P (Diamètre de l'arbre) (mm) | No. (Diamètre nominal) (mm) | L (Dimension L) (mm) | Type d'outil | |
---|---|---|---|---|---|---|---|---|---|---|---|
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.4 ~ 0.49 | 0.5 | 40 ~ 100 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.5 ~ 0.59 | 0.6 | 40 ~ 100 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.6 ~ 0.69 | 0.7 | 40 ~ 100 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.7 ~ 0.79 | 0.8 | 40 ~ 150 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.8 ~ 0.89 | 0.9 | 40 ~ 150 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.9 ~ 0.99 | 1 | 40 ~ 200 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 1 ~ 1.49 | 1.5 | 40 ~ 200 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 1.5 ~ 1.99 | 2 | 40 ~ 250 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 2 ~ 2.49 | 2.5 | 40 ~ 300 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 2.5 ~ 2.99 | 3 | 40 ~ 300 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 3 ~ 3.49 | 3.5 | 40 ~ 300 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 3.5 ~ 3.99 | 4 | 40 ~ 300 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 4 ~ 4.49 | 4.5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 4.5 ~ 4.99 | 5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 5 ~ 5.49 | 5.5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 5.5 ~ 5.99 | 6 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 6 ~ 6.49 | 6.5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 6.5 ~ 6.99 | 7 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 7 ~ 7.99 | 8 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 8 ~ 9.99 | 10 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 10 ~ 11.99 | 12 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 3.5 ~ 3.99 | 4 | 40 ~ 300 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 4 ~ 4.49 | 4.5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 4.5 ~ 4.99 | 5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 5 ~ 5.49 | 5.5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 5.5 ~ 5.99 | 6 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 6 ~ 6.49 | 6.5 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 6.5 ~ 6.99 | 7 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 7 ~ 7.99 | 8 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 8 ~ 9.99 | 10 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 10 ~ 11.99 | 12 | 40 ~ 350 | Standard type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.3 ~ 0.395 | 0.4 | 20 ~ 60 | Small diameter type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.4 ~ 0.495 | 0.5 | 20 ~ 60 | Small diameter type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.5 ~ 0.595 | 0.6 | 20 ~ 60 | Small diameter type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.6 ~ 0.695 | 0.7 | 20 ~ 60 | Small diameter type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.7 ~ 0.795 | 0.8 | 20 ~ 60 | Small diameter type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.8 ~ 0.895 | 0.9 | 20 ~ 60 | Small diameter type | ||
1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.9 ~ 0.995 | 1 | 20 ~ 60 | Small diameter type |
Loading...
Type de forme | Pas de traitement de la pointe | Matériau | SKH51 | Traitement de surface | Non |
---|---|---|---|---|---|
Forme de l'embout | Non | Forme du dégagement de gaz | Non | Type de gravure | Non |
Nombre de caractères de gravure | Non | Norme technique | JIS |
Configurer
Propriétés de base
Tolérance de la dimension L (tolérance de référence)
Epaisseur de la tête
D/P (Diamètre de l'arbre)(mm)
No. (Diamètre nominal)(mm)
L (Dimension L)(mm)
Type d'outil
Type
Tolérance du diamètre de l'arbre (tolérance de référence)
Filtrer par type de données CAO
Propriétés optionnelles