1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug (SPT-L3)

1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug SPT-L3
  • Remise sur volume

Détails du produit:

Référence fabricant: SPT-L3

Marque: MISUMI

Prix: 29.21

Délai de livraison: 5 jours


Données techniques:

Use: For SPT Cover



● This can be installed at an entrance door of a dangerous area, and is used with a setting that turns off power when a plug is removed
● 3-split type is made more secure by having the operator to carry one of the parts (see figure below)
        

· It cannot be used in a location where there is severe vibration or shock, or a significant amount of dust, mist or corrosive gas.
· Do not mount downward as there is a risk of dropout.
· Do not insert or remove while power is on other than in emergency. It may shorten the contact life.
· Take precautions in case the driving source is blocked by pulling out the plug. (such as an electromagnetic brake)
· Do not configure the emergency stop circuit only by using this product. The emergency stop state may be canceled simply by inserting the plug, causing danger.
· Mount in a position where water and oil do not reach.
· After the plug is disconnected, do not touch the charged portion of the socket.

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

SPT-L3

Spécifications

1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug:Related Image

Part NumberNumber of CircuitsNumber of SplitWire
for Hanging
SPT-111-Circuit2-splitNot Provided
SPT-11-HIncluded
MSPT-222-CircuitNot Provided
MNSP-41-Circuit3-split
Sales: Misumi / Manufacturer: Daiwa Dengyo

Plus d'informations

1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug:Related Image


1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug:Related Image

Part NumberRatingInsulation ResistanceWithstand Voltage VContact
Resistance
Electrical
Life
Cycles or More
Place of
Use
Operating
Temperature
Range
Wiring
Terminals
Maximum
Mounting
Plate Thickness
Mass
approx. g
Between Charging Metal Part and
Non-Charging Metal Part
Between Same-Pole Terminals
in Open Circuit Condition
Between Charging Metal Part and
Non-Charging Metal Part
Between Same-Pole Terminals
in Open Circuit Condition
SPT-11250 VAC 15A
(Min 24 V 5 mA)
100 MΩ or more
(500 VDC)
150050 MΩ
or less
5000Indoor-5 ~
+60°C
2 x M46mm210
SPT-11-H215
MSPT-224 x M4235
MNSP-4600 VAC 30A
(Min 24 V 10mA)
100 MΩ or more
(1000 VDC)
220020002 x M44.5mm570
Detailed Specification
Référence pièce
SPT-L3
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Use

29.21 €

1 Disponible 5 jours For SPT Cover

Loading...

  1. 1

Informations de base

Material Steel Plate Paint Surface Processing Uniclo (Trivalent Chromate) Plating

Vous vous trouvez sur la page de 1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug, le numéro d'article est le suivant: SPT-L3.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article SPT-L3.

Variantes de ce produit

Référence pièce
MNSP-4L1
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?
Use

65.06 €

1 5 jours For MNSP-4 Cover

Assistance technique