Removal Tools For 3191 Connectors (Numéros de référence)
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Extraction tool that minimizes the load when extracting contact
● This is a tool for extracting contacts inserted into the 3191 connector housing.
● Manufacturer: Molex
· Once extracted, the contact cannot be used again.
· It cannot be used for other than 3191 connector contacts.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
J5800-003
Spécifications
Plus d'informations
Extraction Method(1) Insert the extraction tool from the mating side of the housing.
(2) Pull the electric wire with the terminal stop of the housing pushed up.
(3) When you pull the wire, take care not to pull too hard.
(4) If you pull too hard, the housing may become scratched and unusable.
Référence pièce
|
|---|
| J5800-003 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | |
|---|---|---|---|---|
46.47 € | 1 | Disponible | 5 jours |
Loading...
Features
● A compact, high-density nylon connector having a 6.7 mm pitch and widely used in a variety of equipment, such as FA devices.
● Due to the installation of the lock mechanism after bonding, a configuration is formed that prevents an undoing of the bond caused by possible vibration.
● The good quality and stability of use are due to the 3191 Series Connectors having UL / CSA standards.
UL: E29179
CSA: LR19980
● Due to the installation of the lock mechanism after bonding, a configuration is formed that prevents an undoing of the bond caused by possible vibration.
● The good quality and stability of use are due to the 3191 Series Connectors having UL / CSA standards.
UL: E29179
CSA: LR19980
Specifications
| Item | Content |
|---|---|
| Maximum Rated Voltage | 600 VAC / VDC |
| Maximum Rated Current | 12 A |
| Withstand Voltage | 1,500 VAC / 1 minute |
| Insulation Resistance | 1,000 MΩ or more |
| Contact Resistance | 10 mΩ or less |
| Applicable Electric Wire Range | AWG28 ~ 14 (0.08 ~ 2 mm2) |
| Suitable Electric Wire Insulation Outer Diameter | φ0.8 ~ φ4.1 mm |
| Operating Temperature Range | -40°C ~ +105°C |
(*) The rated current depends on the number of cores in the housing. For details, check the table below.
| Number of Cores | Rated Current (A) |
|---|---|
| 2 | 12 |
| 3 | 11 |
| 4 | 9 |
| 6 | 9 |
| 9 | 8 |
| 12 | 8 |
Material
| Item | Material |
|---|---|
| Housing | Nylon 66 (UL94V-2) |
| Housing Color | White Color |
| Crimp Contact | Brass / Copper Base Tin-Plated |
About Coupling
Informations de base
| Applicable Type | 3191 Connectors | Product Classification | Extraction Tool |
|---|
Vous vous trouvez sur la page de Removal Tools For 3191 Connectors, le numéro d'article est le suivant: J5800-003.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article J5800-003.
Configurer
Propriétés de base
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.