TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
- Remise sur volume
- TS
- General Steel
- 2 Flutes
- B (Stub)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
13.69 € | 1 | Disponible | 5 jours | 0.5 | 0.75 | 4 | 40 | Sharp Corner | Stocked Product | 1 | ● | |
13.47 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 40 | Sharp Corner | Stocked Product | 1 | ● | |
13.02 € | 1 | Disponible | 5 jours | 1.5 | 2.25 | 4 | 40 | Sharp Corner | Stocked Product | 1 | ● | |
13.47 € | 1 | Disponible | 5 jours | 2 | 3 | 4 | 40 | Sharp Corner | Stocked Product | 1 | ● | |
22.40 € | 1 | Disponible | 5 jours | 2 | 3 | 6 | 40 | Sharp Corner | Stocked Product | 1 | ● | |
12.80 € | 1 | Disponible | 5 jours | 2.5 | 3.75 | 4 | 40 | Sharp Corner | Stocked Product | 1 | ● | |
16.26 € | 1 | Disponible | 5 jours | 3 | 4.5 | 6 | 45 | Sharp Corner | Stocked Product | 1 | ● | |
21.85 € | 1 | Disponible | 5 jours | 3.5 | 5.25 | 6 | 45 | Sharp Corner | Stocked Product | 1 | ● | |
18.77 € | 1 | Disponible | 5 jours | 4 | 6 | 6 | 45 | Sharp Corner | Stocked Product | 1 | ● | |
18.38 € | 1 | Disponible | 5 jours | 5 | 7.5 | 6 | 45 | Sharp Corner | Stocked Product | 1 | ● | |
48.31 € | 1 | Disponible | 13 jours | 5.85 | 9 | 6 | 45 | Sharp Corner | Manufactured Product | 1 | □ | |
18.48 € | 1 | Disponible | 5 jours | 6 | 9 | 6 | 45 | Sharp Corner | Stocked Product | 2 | ● | |
30.16 € | 1 | Disponible | 5 jours | 8 | 12 | 8 | 60 | Sharp Corner | Stocked Product | 2 | ● | |
47.71 € | 1 | Disponible | 5 jours | 10 | 15 | 10 | 70 | Sharp Corner | Stocked Product | 2 | ● | |
93.62 € | 1 | Disponible | 13 jours | 11.87 | 18 | 12 | 75 | Sharp Corner | Manufactured Product | 1 | □ | |
93.62 € | 1 | Disponible | 13 jours | 11.89 | 18 | 12 | 75 | Sharp Corner | Manufactured Product | 1 | □ | |
93.62 € | 1 | Disponible | 13 jours | 11.97 | 18 | 12 | 75 | Sharp Corner | Manufactured Product | 1 | □ | |
93.62 € | 1 | Disponible | 13 jours | 11.99 | 18 | 12 | 75 | Sharp Corner | Manufactured Product | 1 | □ | |
54.87 € | 1 | Disponible | 5 jours | 12 | 18 | 12 | 75 | Sharp Corner | Stocked Product | 2 | ● | |
87.33 € | 1 | Disponible | 5 jours | 14 | 21 | 12 | 75 | Sharp Corner | Stocked Product | 3 | ● | |
92.54 € | 1 | Disponible | 5 jours | 16 | 24 | 16 | 100 | Sharp Corner | Stocked Product | 2 | ● | |
157.99 € | 1 | Disponible | 5 jours | 20 | 30 | 20 | 105 | Sharp Corner | Stocked Product | 2 | ● |
Loading...
Spécifications
Model Number
TSC-EM2B (Standard) / TSC-PEM2B (Sharp Edge)
| Outer Diameter D |
Shank Diameter d |
Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | - | 4 | 0.75 | 40 | 1 | ● |
| 1 | - | 4 | 1.5 | 40 | 1 | ● |
| 1.5 | - | 4 | 2.25 | 40 | 1 | ● |
| 2 | - | 4 | 3 | 40 | 1 | ● |
| 2 | 6 | 6 | 3 | 40 | 1 | ● |
| 2.5 | - | 4 | 3.75 | 40 | 1 | ● |
| 3 | - | 6 | 4.5 | 45 | 1 | ● |
| 3.01 ~ 3.49 | - | 6 | 5.25 | 45 | 1 | □ |
| 3.5 | - | 6 | 5.25 | 45 | 1 | ● |
| 3.51 ~ 3.99 | - | 6 | 6 | 45 | 1 | □ |
| 4 | - | 6 | 6 | 45 | 1 | ● |
| 4.01 ~ 4.49 | - | 6 | 6.75 | 45 | 1 | □ |
| 4.5 | - | 6 | 6.75 | 45 | 1 | ● |
| 4.51 ~ 4.99 | - | 6 | 7.5 | 45 | 1 | □ |
| 5 | - | 6 | 7.5 | 45 | 1 | ● |
| 5.01 ~ 5.49 | - |
6 |
8.25 |
45 |
1 | □ |
| 5.5 | - |
6 |
8.25 |
45 |
1 | ● |
| 5.51 ~ 5.99 | - |
6 |
9 |
45 |
1 | □ |
| 6 | - |
6 |
9 |
45 |
2 | ● |
| 7.51 ~ 7.99 | - |
8 |
12 |
60 |
1 | □ |
| 8 | - |
8 |
12 |
60 |
2 | ● |
| 9.51 ~ 9.99 | - |
10 |
15 |
70 |
1 | □ |
| 10 | - |
10 |
15 |
70 |
2 | ● |
| 11.51 ~ 11.99 | - |
12 |
18 |
75 |
1 | □ |
| 12 | - |
12 |
18 |
75 |
2 | ● |
| 14 | - |
12 |
21 |
75 |
3 | ● |
| 15.51 ~ 15.99 | - |
16 |
24 |
100 |
1 | □ |
| 16 | - |
16 |
24 |
100 |
2 | ● |
| 19.51 ~ 19.99 | - |
20 |
30 |
105 |
1 | □ |
| 20 | - |
20 |
30 |
105 |
2 | ● |
[ ! ]Blade diameters of manufactured products are designated in 0.01 mm increments
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The stubby flute length that is 1.5 times greater than the flute blade diameter is ideal for high-speed machining.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Carré |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Rainure / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Type
- TSC-EM2B
- TSC-PEM2B
-
Geometry
- Sharp Corner
- Avec engagement
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 13 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.