TSC series carbide square end mill, 2-flute / 3.5D Flute Length model (Numéros de référence)
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
- TS
- General Steel
- 2 Flutes
- RL
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| Référence pièce | Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|
Loading...
Spécifications
Model Number
TSC-EM2RL (Standard) / TSC-PEM2RL (Sharp Edge)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | 1.75 | 45 | 4 | 1 | ● |
| 1 | 3.5 | 45 | 4 | 1 | ● |
| 1.5 | 5.25 | 45 | 4 | 1 | ● |
| 2 | 7 | 45 | 4 | 1 | ● |
| 3 | 10.5 | 45 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 14 | 50 | 6 | 1 | □ |
| 4 | 14 | 50 | 6 | 1 | ● |
| 4.51 ~ 4.99 | 17.5 | 55 | 6 | 1 | □ |
| 5 | 17.5 | 55 |
6 |
1 | ● |
| 5.51 ~ 5.99 | 21 | 60 |
6 |
1 | □ |
| 6 | 21 | 60 |
6 |
2 | ● |
| 7.51 ~ 7.99 | 28 | 70 |
8 |
1 | □ |
| 8 | 28 | 70 |
8 |
2 | ● |
| 9.51 ~ 9.99 | 35 | 80 |
10 |
1 | □ |
| 10 | 35 | 80 |
10 |
2 | ● |
| 11.51 ~ 11.99 | 42 | 95 |
12 |
1 | □ |
| 12 | 42 | 95 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
●The flute length is between that of regular flutes and long flutes, with a 3.5 times larger flute diameter.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Carré |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Rainure
- Inclined Cutting
- Countersunk
-
Geometry
- Sharp Corner
- Avec engagement
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-EM2RL
- SN-TSC-PEM2RL
- SNR-TSC-EM2RL
- SNR-TSC-PEM2RL
- TSC-EM2RL
- TSC-PEM2RL
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 9 jours ou moins
- 13 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.