Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
SEC-EM2R9.34
Référence pièce
|
---|
SEC-EM2R9.34 |
Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
68.54 € | 1 | Disponible | 7 jours | 9.34 | 30 | 10 | 80 | - | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Manufactured Product | 1 | □ |
Loading...
Model Number
SEC-EM2R (Standard) / SEC-PEM2R (Sharp Edge)
Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
0.2 | 0.6 | 40 | 3 | 1 | ● |
0.4 | 1.2 | 40 | 3 | 1 | ● |
0.5 | 1.5 | 40 | 3 | 1 | ● |
0.8 | 2.4 | 40 | 3 | 1 | ● |
1 | 3 | 45 | 4 | 1 | ● |
1.2 | 3.6 | 45 | 4 | 1 | ● |
1.5 | 4.5 | 45 | 4 | 1 | ● |
1.8 | 5.4 | 45 | 4 | 1 | ● |
1.91 ~ 1.99 | 6 | 45 | 4 | 1 | □ (Standard Only) |
2 | 6 | 45 | 4 | 1 | ● |
2.25 ~ 2.49 | 7.5 | 45 | 4 | 1 | □ (Standard Only) |
2.5 | 7.5 | 45 | 4 | 1 | ● |
2.81 ~ 2.99 | 9 | 45 | 6 | 1 | □ (Standard Only) |
3 | 9 | 45 | 6 | 1 | ● |
3.01 ~ 3.49 | 10.5 | 45 | 6 | 1 | □ (Standard Only) |
3.5 | 10.5 | 45 | 6 | 1 | ● |
3.51 ~ 3.99 | 12 | 50 | 6 | 1 | □ (Standard Only) |
4 | 12 | 50 | 6 | 1 | ● |
4.51 ~ 4.99 | 15 | 55 | 6 | 1 | □ (Standard Only) |
5 | 15 | 55 | 6 | 1 | ● |
5.51 ~ 5.99 | 18 | 60 | 6 | 1 | □ (Standard Only) |
6 | 18 | 60 | 6 | 2 | ● |
7.01 ~ 7.99 | 24 | 70 | 8 | 1 | □ (Standard Only) |
8 | 24 | 70 | 8 | 2 | ● |
9.01 ~ 9.99 | 30 | 80 | 10 | 1 | □ (Standard Only) |
10 | 30 | 80 | 10 | 2 | ● |
11.01 ~ 11.99 | 36 | 85 | 12 | 1 | □ (Standard Only) |
12 | 36 | 85 | 12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
● A general-purpose 2-flute end mill for a wide range of applications.
● Delivers a finish with very good working surface roughness after machining.
Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Carré |
---|---|---|---|---|---|
Coating | Non revêtu | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Vous vous trouvez sur la page de Carbide square end mill, 2-flute / 3D Flute Length (regular) model, le numéro d'article est le suivant: SEC-EM2R9.34.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article SEC-EM2R9.34.
Configurer
Propriétés de base
Length Under Neck (ℓ1)(mm)
Processing Applications
Type
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Geometry
Additional Classification
Filtrer par jours d'expédition standard
Propriétés optionnelles
Référence pièce |
---|
SEC-EM2R0.8 |
SEC-EM2R1 |
SEC-EM2R1.2 |
SEC-EM2R9.35 |
SEC-EM2R9.36 |
SEC-EM2R9.37 |
Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
17.69 € | 1 | Disponible | 5 jours | 0.8 | 2.4 | 3 | 40 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Stocked Product | 1 | ● | |
14.71 € | 1 | Disponible | 5 jours | 1 | 3 | 4 | 45 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Stocked Product | 1 | ● | |
17.48 € | 1 | Disponible | 5 jours | 1.2 | 3.6 | 4 | 45 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Stocked Product | 1 | ● | |
68.54 € | 1 | Disponible | 7 jours | 9.35 | 30 | 10 | 80 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ | |
68.54 € | 1 | Disponible | 7 jours | 9.36 | 30 | 10 | 80 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ | |
68.54 € | 1 | Disponible | 7 jours | 9.37 | 30 | 10 | 80 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ |