TSC series carbide long neck square end mill, 2-flute / long neck model
- Remise sur volume
- TS
- General Steel
- 2 Flutes
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 jours | 1.5 | 3 | 4 | 40 | 8 ～ 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 1.45 | - | - | - | - | - | ||
- | 1 | 8 jours | 1.6 | 3.2 | 4 | 40 | 9 ～ 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 1.55 | - | - | - | - | - | ||
- | 1 | 8 jours | 1.8 | 3.6 | 4 | 40 | 9 ～ 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 1.75 | - | - | - | - | - | ||
- | 1 | 8 jours | 2 | 4 | 4 | 40 | 9 ～ 21 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 1.95 | - | - | - | - | - | ||
- | 1 | 8 jours | 2.5 | 5 | 4 | 40 | 10 ～ 22 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 2.4 | - | - | - | - | - | ||
- | 1 | 8 jours | 3 | 6 | 6 | 45 | 11 ～ 21 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 2.9 | - | - | - | - | - | ||
- | 1 | 8 jours | 4 | 8 | 6 | 45 | 13 ～ 23 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 3.8 | - | - | - | - | - | ||
- | 1 | 8 jours | 5 | 10 | 6 | 45 | 15 ～ 25 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Avec engagement | Powerful Helix (45° to 60°) | Manufactured Product | 3 | □ | 4.8 | - | - | - | - | - | ||
- | 1 | 8 jours | 1.5 | 3 | 4 | 40 | 8 ～ 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 1.45 | - | - | - | - | - | ||
- | 1 | 8 jours | 1.6 | 3.2 | 4 | 40 | 9 ～ 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 1.55 | - | - | - | - | - | ||
- | 1 | 8 jours | 1.8 | 3.6 | 4 | 40 | 9 ～ 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 1.75 | - | - | - | - | - | ||
- | 1 | 8 jours | 2 | 4 | 4 | 40 | 9 ～ 21 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 1.95 | - | - | - | - | - | ||
- | 1 | 8 jours | 2.5 | 5 | 4 | 40 | 10 ～ 22 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 2.4 | - | - | - | - | - | ||
- | 1 | 8 jours | 3 | 6 | 6 | 45 | 11 ～ 21 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 2.9 | - | - | - | - | - | ||
- | 1 | 8 jours | 4 | 8 | 6 | 45 | 13 ～ 23 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 3.8 | - | - | - | - | - | ||
- | 1 | 8 jours | 5 | 10 | 6 | 45 | 15 ～ 25 | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Sharp Corner | Standard Helix (30 to 40°) | Manufactured Product | 3 | □ | 4.8 | - | - | - | - | - | ||
34.46 € | 1 | Disponible | 5 jours | 0.2 | 0.3 | 4 | 50 | 1 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.18 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
43.62 € | 1 | Disponible | 5 jours | 0.2 | 0.3 | 4 | 50 | 1.5 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.18 | 1.57 | 1.65 | 1.83 | 2.06 | 10° | |
24.87 € | 1 | Disponible | 5 jours | 0.3 | 0.45 | 4 | 50 | 1 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
34.46 € | 1 | Disponible | 5 jours | 0.3 | 0.45 | 4 | 50 | 2 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
37.44 € | 1 | Disponible | 5 jours | 0.3 | 0.45 | 4 | 50 | 3 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
50.46 € | 1 | Disponible | 5 jours | 0.3 | 0.45 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
64.20 € | 1 | Disponible | 5 jours | 0.3 | 0.45 | 4 | 50 | 5 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
26.70 € | 1 | Disponible | 5 jours | 0.4 | 0.6 | 4 | 50 | 2 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
75.63 € | 1 | Disponible | 5 jours | 0.4 | 0.6 | 6 | 50 | 2 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 2.06 | 2.13 | 2.28 | 2.45 | 15° | |
21.89 € | 1 | Disponible | 5 jours | 0.4 | 0.6 | 4 | 50 | 3 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
22.98 € | 1 | Disponible | 5 jours | 0.4 | 0.6 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
22.98 € | 1 | Disponible | 5 jours | 0.4 | 0.6 | 4 | 50 | 5 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
17.76 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 4 | 50 | 2 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
17.76 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
59.59 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 6 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 4.13 | 4.26 | 4.56 | 4.91 | 15° | |
18.45 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 4 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
26.70 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 4 | 50 | 8 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
25.77 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 4 | 50 | 10 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
49.31 € | 1 | Disponible | 5 jours | 0.5 | 0.7 | 4 | 50 | 15 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.46 | 15.71 | 16.48 | 18.31 | 20.6 | 10° | |
18.45 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 4 | 50 | 2 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
18.45 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
57.32 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 6 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 4.13 | 4.26 | 4.56 | 4.91 | 15° | |
17.65 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 4 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
25.31 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 4 | 50 | 8 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
34.46 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 4 | 50 | 10 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
35.61 € | 1 | Disponible | 5 jours | 0.6 | 0.9 | 4 | 50 | 12 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.56 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
17.30 € | 1 | Disponible | 5 jours | 0.7 | 1.05 | 4 | 50 | 2 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.66 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
21.89 € | 1 | Disponible | 5 jours | 0.7 | 1.05 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.66 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
21.89 € | 1 | Disponible | 5 jours | 0.7 | 1.05 | 4 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.66 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
29.66 € | 1 | Disponible | 5 jours | 0.7 | 1.05 | 4 | 50 | 8 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.66 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
20.28 € | 1 | Disponible | 5 jours | 0.8 | 1.2 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
20.28 € | 1 | Disponible | 5 jours | 0.8 | 1.2 | 4 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
20.28 € | 1 | Disponible | 5 jours | 0.8 | 1.2 | 4 | 50 | 8 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
26.21 € | 1 | Disponible | 5 jours | 0.8 | 1.2 | 4 | 50 | 10 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
29.88 € | 1 | Disponible | 5 jours | 0.8 | 1.2 | 4 | 50 | 12 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
23.69 € | 1 | Disponible | 5 jours | 0.9 | 1.35 | 4 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
24.16 € | 1 | Disponible | 5 jours | 0.9 | 1.35 | 4 | 50 | 8 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
19.38 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
16.61 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
41.34 € | 1 | Disponible | 5 jours | 1 | 1.5 | 6 | 50 | 6 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.19 | 6.39 | 6.84 | 7.36 | 15° | |
17.97 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 8 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
18.15 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 10 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
18.15 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 12 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
24.16 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 14 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 14.66 | 15.39 | 17.09 | 19.22 | 10° |
Loading...
Spécifications
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
| 0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
| 1 | No Standards | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
| 0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
| 1 | ● | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
| 1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | No Standards | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
| 4 | No Standards | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | ● | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2 | 6 | 6 | ● | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
| 3 | - | 4 | ● | ● | 10° | 3.14 | 3.30 | 3.66 | 4.12 | |||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.10 | 6.87 | |||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
| 24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
| 0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.30 | 3.66 | 4.12 | 1 |
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | No Standards | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
| 7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
| 1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.40 | 12.27 | |||||
| 12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference | ||||||||
| 2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
| 50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
| 25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
| 35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
| 50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
| 6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | 10° | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
| 50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Figure |
| 1.5 | 8 ~ 20 | 4 | ● | ● | 3 | 1.45 | 40 | 3 |
| 1.6 | 9 ~ 20 | 4 | ● | ● | 3.2 | 1.55 | 40 | 3 |
| 1.8 | 9 ~ 20 | 4 | ● | ● | 3.6 | 1.75 | 40 | 3 |
| 2 | 9 ~ 21 | 4 | ● | ● | 4 | 1.95 | 40 | 3 |
| 2.5 | 10 ~ 22 | 4 | ● | ● | 5 | 2.4 | 40 | 3 |
| 3 | 11 ~ 21 | 6 | ● | ● | 6 | 2.9 | 45 | 3 |
| 4 | 13 ~ 23 | 6 | ● | ● | 8 | 3.8 | 45 | 3 |
| 5 | 15 ~ 25 | 6 | ● | ● | 10 | 4.8 | 45 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
Plus d'informations
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining. 
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Tolerance of OD(mm) | 0 ~ -0.02 |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
[8-25/1mmunités]
-
Geometry
- Sharp Corner
- Avec engagement
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Type
- LN-TSC-EM2S
- LN-TSC-PEM2S
- TSC-EM2LB
- TSC-PEM2LB
-
Processing Applications
- Flat Surface
- Side Surface
- Rainure
- Inclined Cutting
- Countersunk
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.