Confirmé

R Size(mm)
- 1.5
Flute Length (ℓ)(mm)
- 2.4
Overall Length (L)(mm)
- 50
Length Under Neck (ℓ1)(mm)
- 6
Shank Diameter (d)(mm)
- 6
R Precision(μm)
- ±0.005
Inventory Classification
- Stocked Product
Type
- TSC-BEM2LB
Jours d'expédition estimés
- Tout
- Dans les 5 jours ouvrables

TSC series carbide long neck ball end mill, 2-flute / long neck model (TSC-BEM2LB1.5-6)

Référence pièce:

TSC-BEM2LB1.5-6

Réinitialiser

Schéma d’ensemble
Liste des numéros de pièces
Plus d'informations

Schéma d’ensemble

TSC series carbide long neck ball end mill, 2-flute / long neck model:Related Image

Liste des numéros de pièces

Nombre d’articles

Référence pièce

TSC-BEM2LB1.5-6

R Size

(mm)

Flute Length (ℓ)

(mm)

Overall Length (L)

(mm)

Length Under Neck (ℓ1)

(mm)

Shank Diameter (d)

(mm)

R Precision

(μm)

Inventory Classification

Outer Diameter D

(mm)

Figure

Length Under Neck (θ)

(Degree)

Under Neck Diameter d1

(mm)

Actual Effective Length Depends on Work Inclination Angle 30'

(mm)

Actual Effective Length Depends on Work Inclination Angle 1°

(mm)

Actual Effective Length Depends on Work Inclination Angle 2°

(mm)

Actual Effective Length Depends on Work Inclination Angle 3°

(mm)

Quantité minimale de commande

1.5

2.4

±0.005

Stocked Product

15°

2.9

6.24

6.49

7.1

7.89

1 pièces

Prix unitaire (hors TVA)(Prix unitaire TTC)	Jour d'expédition standard

30.02 €

( 35.72 € )

5 jours ouvrables

Plus d'informations

Informations de base
Spécifications et prix
Caractéristiques et exemples d’utilisation

Informations de base

A rich assortment of industry's largest 280 sizes

Spécifications et prix

Spécifications

TSC series carbide long neck ball end mill, 2-flute / long neck model:Related Image
Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.05	0.2	-	4	0.07	0.085	50	10°	0.20	0.21	0.23	0.26	1
	0.3							0.31	0.32	0.35	0.39
	0.5							0.52	0.54	0.59	0.65
0.1	0.3	-	4	0.15	0.18	50	10°	0.31	0.32	0.35	0.39	1
	0.5	-	4				10°	0.52	0.54	0.59	0.65
	0.75	-	4				10°	0.78	0.81	0.88	0.98
	1	-	4				10°	1.04	1.08	1.18	1.30
	1	6	6				15°	1.04	1.08	1.18	1.31
	1.25	-	4				10°	1.30	1.35	1.47	1.64
	1.5	-	4				10°	1.56	1.62	1.77	1.95
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	1.75	-	4				10°	1.82	1.89	2.07	2.30
	2	-	4				10°	2.08	2.16	2.36	2.59
	2	6	6				15°	2.08	2.16	2.36	2.63
	2.5	-	4				10°	2.60	2.71	2.95	3.24
	3	-	4				10°	3.12	3.25	3.54	3.89
0.15	0.5	-	4	0.2	0.28	50	10°	0.52	0.54	0.59	0.65	1
	0.6	-	4				10°	0.62	0.64	0.71	0.78
	0.75	-	4				10°	0.78	0.81	0.88	0.98
	1	-	4				10°	1.04	1.08	1.18	1.30
	1	6	6				15°	1.04	1.08	1.18	1.31
	1.25	-	4				10°	1.30	1.35	1.47	1.64
	1.5	-	4				10°	1.56	1.62	1.77	1.95
	2	-	4				10°	2.08	2.16	2.36	2.59
	2.25	-	4				10°	2.34	2.43	2.66	2.95
	2.5	-	4				10°	2.60	2.70	2.95	3.28
	2.75	-	4				10°	2.86	2.97	3.25	3.61
	3	-	4				10°	3.12	3.24	3.55	3.94	1
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91
	5	-	4				10°	5.20	5.41	5.91	6.57

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.2	0.5	-	4	0.3	0.37	50	10°	0.52	0.54	0.59	0.65	1
	0.75	-	4				10°	0.78	0.81	0.88	0.98
	1	-	4				10°	1.04	1.08	1.18	1.30
	1	6	6				15°	1.04	1.08	1.18	1.31
	1.5	-	4				10°	1.56	1.62	1.77	1.95
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	2	-	4				10°	2.08	2.16	2.36	2.59
	2	6	6				15°	2.08	2.16	2.36	2.63
	2.5	-	4				10°	2.60	2.71	2.95	3.24
	2.5	6	6				15°	2.60	2.70	2.95	3.28
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91
	5	-	4				10°	5.20	5.41	5.90	6.49
	5.5	-	4				10°	5.72	5.95	6.51	7.23
	6	-	4				10°	6.24	6.49	7.10	7.89
	6	6	6				15°	6.24	6.49	7.10	7.89
0.25	1	-	4	0.35	0.46	50	10°	1.04	1.08	1.18	1.31	1
	1.5	-	4				10°	1.56	1.62	1.77	1.97
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	2	-	4				10°	2.08	2.16	2.36	2.59
	2.5	-	4				10°	2.60	2.70	2.95	3.28
	2.5	6	6				15°	2.60	2.70	2.95	3.28
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91
	5	-	4				10°	5.20	5.41	5.90	6.49
	5	6	6				15°	5.20	5.41	5.91	6.57
	5.5	-	4				10°	5.72	5.95	6.51	7.23
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	7	-	4				10°	7.28	7.58	8.28	9.20
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	9	-	4				10°	9.36	9.74	10.65	11.83
	10	-	4				10°	10.39	10.82	11.80	12.97
0.3	1	-	4	0.45	0.56	50	10°	1.04	1.08	1.18	1.31	1
	1.5	-	4				10°	1.56	1.62	1.77	1.97
	1.5	6	6				15°	1.56	1.62	1.77	1.97
	2	-	4				10°	2.08	2.16	2.36	2.59
	2	6	6				15°	2.08	2.16	2.36	2.63
	2.5	-	4				10°	2.60	2.70	2.95	3.28
	2.5	6	6				15°	2.60	2.70	2.95	3.28
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	3.5	-	4				10°	3.64	3.79	4.14	4.60
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	4.5	-	4				10°	4.68	4.87	5.32	5.91

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.3	5	-	4	0.45	0.56	50	10°	5.20	5.41	5.90	6.49	1
	5	6	6				15°	5.20	5.41	5.91	6.57
	5.5	-	4				10°	5.72	5.95	6.51	7.23
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	6.5	-	4				10°	6.76	7.04	7.69	8.54
	7	-	4				10°	7.28	7.57	8.26	9.08
	7.5	-	4				10°	7.80	8.12	8.87	9.86
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	8.5	-	4				10°	8.84	9.20	10.06	11.17
	9	-	4				10°	9.36	9.74	10.65	11.83
	9.5	-	4				10°	9.88	10.29	11.24	12.49
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	11	-	4				10°	11.44	11.91	13.02	14.46
	12	-	4				10°	12.47	12.99	14.16	15.57
0.4	2	-	4	0.6	0.76	50	10°	2.08	2.16	2.36	2.59	1
	2	6	6				15°	2.08	2.16	2.36	2.63
	3	-	4				10°	3.12	3.24	3.55	3.94
	3	6	6				15°	3.12	3.24	3.55	3.94
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	5	-	4				10°	5.20	5.41	5.90	6.49
	5	6	6				15°	5.20	5.41	5.91	6.57
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	7	-	4				10°	7.28	7.57	8.26	9.08
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	9	-	4				10°	9.36	9.74	10.65	11.83
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	12	-	4				10°	12.48	12.99	14.20	15.78
0.5	2.5	-	4	0.75	0.95	50	10°	2.60	2.70	2.95	3.28	1
	3	-	4				10°	3.12	3.25	3.54	3.89
	3	6	6				15°	3.12	3.24	3.55	3.94
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.11	4.23	4.49	4.78
	5	-	4				10°	5.20	5.41	5.90	5.98
	5	6	6				15°	5.20	5.41	5.91	6.57
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.17	6.34	6.73	7.17
	7	-	4				10°	7.28	7.57	8.26	9.08
	7	6	6				15°	7.28	7.58	8.28	9.20
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.22	8.46	8.97	9.57
	9	-	4				10°	9.35	9.74	10.62	11.68
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.28	10.57	11.22	11.96
	12	-	4				10°	12.47	12.99	14.16	15.57
	12	6	6				15°	12.48	12.99	14.20	15.78
	14	-	4				10°	14.55	15.15	16.52	18.16
	14	6	6				15°	14.57	15.16	16.57	18.41
	16	-	4				10°	16.63	17.31	18.87	20.76
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4			70	10°	18.71	19.48	21.23	23.35

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.5	20	-	4	0.75	0.95	70	10°	20.79	21.64	23.59	25.95	1
	20	6	6				15°	20.81	21.66	23.67	26.30
	22	-	6				15°	22.89	23.83	26.04	28.93
0.6	4	-	4	0.9	1.15	50	10°	4.16	4.33	4.73	5.26	1
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	12	-	4				10°	12.47	12.99	14.16	15.57
	14	-	4				10°	14.57	15.16	16.57	18.41
	16	-	4				10°	16.65	17.33	18.93	21.04
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4				10°	18.73	19.49	21.30	23.67
	20	-	4				10°	20.81	21.66	23.67	26.30
	24	-	4				10°	24.97	25.99	28.40	31.56
0.7	8	-	4	1	1.35	50	10°	8.31	8.66	9.44	10.38	1
	12						10°	12.47	12.99	14.16	15.57
	16						10°	16.63	17.31	18.87	20.76
0.75	3	-	4	1.1	1.45	50	10°	3.12	3.24	3.55	3.94	1
	4	-	4				10°	4.16	4.33	4.73	5.26
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.24	6.49	7.10	7.89
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.32	8.66	9.46	10.52
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.40	10.83	11.83	13.15
	12	-	4				10°	12.47	12.99	14.16	15.57
	12	6	6				15°	12.48	12.99	14.20	15.78
	14	-	4				10°	14.55	15.15	16.52	18.16
	16	-	4				10°	16.63	17.31	18.87	20.76
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4				10°	18.71	19.48	21.23	23.35
	20	-	4				10°	20.79	21.64	23.59	Without Interference
	20	6	6				15°	20.81	21.66	23.67	26.30
	22	-	4				10°	22.89	23.83	26.04	Without Interference
	30	-	4				10°	31.22	32.49	35.51	Without Interference
0.8	4	-	4	1.2	1.55	50	10°	4.16	4.33	4.73	Without Interference	1
	8							8.31	8.66	9.44	10.38
	12							12.47	12.99	14.16	15.57
	16							16.63	17.31	18.87	20.76
	20							20.79	21.64	23.59	Without Interference
0.9	8	-	4	1.3	1.75	50	10°	8.32	8.66	9.46	10.52	1
	12							12.48	12.99	14.20	15.78
	16							16.65	17.33	18.93	21.04
	20							20.81	21.66	23.67	Without Interference
1	3	-	4	1.5	1.95	50	10°	3.12	3.24	3.55	3.94	1
	4	-	4				10°	4.16	4.33	4.72	5.19
	4	6	6				15°	4.16	4.33	4.73	5.26
	6	-	4				10°	6.24	6.49	7.08	7.78
	6	6	6				15°	6.17	6.34	6.73	7.17
	8	-	4				10°	8.31	8.66	9.44	10.38
	8	6	6				15°	8.22	8.46	8.97	9.57
	10	-	4				10°	10.39	10.82	11.80	12.97
	10	6	6				15°	10.28	10.57	11.22	11.96

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
1	12	-	4	1.5	1.95	50	10°	12.47	12.99	14.16	15.57	1
	12	6	6				15°	12.33	12.69	13.46	14.35
	14	-	4				10°	14.55	15.15	16.52	18.16
	16	-	4				10°	16.63	17.31	18.87	Without Interference
	16	6	6			70	15°	16.65	17.33	18.93	21.04
	18	-	4				10°	18.71	19.48	21.23	Without Interference
	20	-	4				10°	20.79	21.64	23.59	Without Interference
	20	6	6				15°	20.81	21.66	23.67	26.30
	22	-	4				10°	22.87	23.81	25.95	Without Interference
	25	-	4				10°	25.98	27.05	29.49	Without Interference
	25	6	6			110	15°	26.02	27.08	29.59	32.87
	30	-	4			70	10°	31.18	32.46	Without Interference	Without Interference
	30	6	6			110	15°	31.22	32.49	35.51	Without Interference
	35	-	4				10°	36.38	37.87	Without Interference	Without Interference
	35	6	6				15°	36.42	37.91	41.42	Without Interference
	40	-	4				10°	41.57	43.28	Without Interference	Without Interference
	40	6	6				15°	41.63	43.32	47.34	Without Interference
	50	-	4				10°	51.97	54.11	Without Interference	Without Interference
1.25	8	-	4	2.3	2.4	50	10°	8.32	8.66	9.46	10.52	1
	10							10.40	10.83	11.83	13.15
	15							15.61	16.24	17.75	Without Interference
	20					70		20.81	21.66	Without Interference	Without Interference
	25							26.02	27.08	Without Interference	Without Interference
	30							31.22	32.49	Without Interference	Without Interference
	35							36.42	37.91	Without Interference	Without Interference
1.5	6	3	3	2.4	2.9	50	-	6.24	6.49	7.10	7.89	1
	6	4	4				10°	6.24	6.49	7.10	7.89
	6	-	6					6.24	6.49	7.10	7.89
	8	-	6					8.31	8.66	9.44	10.38
	10	-	6					10.39	10.82	11.80	12.97
	12	-	6					12.47	12.99	14.16	15.57
	14	-	6					14.57	15.16	17.75	18.41
	15	-	6					15.61	16.24	23.67	19.72
	16	-	6			70		16.63	17.31	18.87	20.76
	20	-	6					20.79	21.64	23.59	25.95
	25	-	6					25.98	27.05	29.49	Without Interference
	30	-	6					31.18	32.46	35.39	Without Interference
	35	-	6			110		36.38	37.87	41.29	Without Interference
	40	-	6					41.57	43.28	Without Interference	Without Interference
	50	-	6					51.97	54.11	Without Interference	Without Interference
1.75	10	-	6	2.8	3.35	50	10°	10.40	10.83	11.83	13.15	1
	15					70		15.61	16.24	17.75	19.72
	20							20.81	21.66	23.67	Without Interference
	25							26.02	27.08	29.59	Without Interference
	30							31.22	32.49	Without Interference	Without Interference
	35					110		36.42	37.91	Without Interference	Without Interference
	45					110		46.83	48.74	Without Interference	Without Interference
2	8	4	4	3	3.85	50	-	Without Interference	Without Interference	Without Interference	Without Interference	1
	8	-	6				10°	8.33	8.70	9.59	10.38
	10	-	6					10.39	10.82	11.80	12.97
	12	-	6					12.47	12.99	14.16	15.57
	14	-	6					16.65	17.33	18.93	Without Interference
	15	-	6					15.61	16.24	17.75	Without Interference
	16	-	6					16.63	17.31	18.87	Without Interference
	20	-	6			70		20.79	21.64	23.59	Without Interference
	25	-	6					25.98	27.05	29.49	Without Interference
	30	-	6					31.18	32.46	Without Interference	Without Interference
	35	-	6			110		36.38	37.87	Without Interference	Without Interference
	40	-	6					41.57	43.28	Without Interference	Without Interference
	45	-	6					46.77	48.70	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

For Cutting Conditions, Refer to >>Click here.

Model Number
TSC-BEM2LB (Stocked Product)

Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Tip R	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
2	50	-	6	3	3.85	110	10°	51.97	54.11	Without Interference	Without Interference	1
2	60	-	6	3	3.85	110	10°	62.36	Without Interference	Without Interference	Without Interference	1
2.5	10	-	6	5	4.85	70	10°	10.40	10.82	11.80	Without Interference	1
	15							15.61	16.24	Without Interference	Without Interference
	20							20.81	21.66	Without Interference	Without Interference
	25							26.02	27.08	Without Interference	Without Interference
	30							31.22	Without Interference	Without Interference	Without Interference
	35					110		36.42	Without Interference	Without Interference	Without Interference
	40							41.63	Without Interference	Without Interference	Without Interference
	45							46.83	Without Interference	Without Interference	Without Interference
	50							52.04	Without Interference	Without Interference	Without Interference
3	10	-	6	6	5.85	70	-	Without Interference	Without Interference	Without Interference	Without Interference	2
	20						-	Without Interference	Without Interference	Without Interference	Without Interference
	25						-	Without Interference	Without Interference	Without Interference	Without Interference
	30						-	Without Interference	Without Interference	Without Interference	Without Interference
	35					110	-	Without Interference	Without Interference	Without Interference	Without Interference
	40						-	Without Interference	Without Interference	Without Interference	Without Interference
	45						-	Without Interference	Without Interference	Without Interference	Without Interference
	50						-	Without Interference	Without Interference	Without Interference	Without Interference
	60						-	Without Interference	Without Interference	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a tip (R), under neck length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-BEM2S (Manufactured Product)

Tip R	Length Under Neck ℓ1 1 mm Increment Designation	Shank Diameter d	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Figure
0.75	8 ~ 20	4	3	1.45	40	3
0.8	8 ~ 20	4	3	1.55	40	3
0.9	8 ~ 20	4	3	1.75	40	3
1	8 ~ 21	4	3	1.95	40	3
1.25	9 ~ 22	4	3.5	2.4	40	3
1.5	9 ~ 23	4	4	2.9	40	3
1.5	9 ~ 36	4	4	2.9	60	3
1.75	10 ~ 24	4	5	3.3	40	3
2	11 ~ 28	6	6	3.8	50	3
2.5	13 ~ 30	8	8	4.8	50	3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

For Cutting Conditions, Refer to >>Click here.

Caractéristiques et exemples d’utilisation

Plus d'informations

TSC series carbide long neck ball end mill, 2-flute / long neck model:Related Image

La référence pièce a été confirmé