TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model (Numéros de référence)
- Remise sur volume
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-MCR-HFEM4S4 |
| TSC-MCR-HFEM4S6 |
| TSC-MCR-HFEM4S8 |
| TSC-MCR-HFEM4S10 |
| TSC-MCR-HFEM4S12 |
| TSC-MCR-HFEM4S16 |
| TSC-MCR-HFEM4S20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure | Shoulder Radius R1 (mm) | Base Radius R2 (mm) | Approximate R-Value (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
92.50 € | 1 | Disponible | 5 jours | 4 | 0.813 | 8 | 50 | 6 | 1 | 0.5 | 4 | 0.813 | |
97.85 € | 1 | Disponible | 5 jours | 6 | 1.219 | 10 | 70 | 6 | 2 | 0.5 | 9 | 1.219 | |
95.55 € | 1 | Disponible | 5 jours | 8 | 1.625 | 16 | 80 | 8 | 2 | 1 | 12 | 1.625 | |
110.12 € | 1 | Disponible | 5 jours | 10 | 2.031 | 20 | 90 | 10 | 2 | 1.5 | 15 | 2.031 | |
146.41 € | 1 | Disponible | 5 jours | 12 | 2.438 | 24 | 100 | 12 | 2 | 1.5 | 18 | 2.438 | |
284.60 € | 1 | Disponible | 5 jours | 16 | 2.465 | 32 | 140 | 16 | 2 | 2 | 24 | 2.465 | |
402.86 € | 1 | Disponible | 5 jours | 20 | 2.607 | 40 | 150 | 20 | 2 | 2 | 30 | 2.607 |
Loading...
Spécifications
Model Number
TSC-MCR-HFEM4S
| Outer Diameter D |
Shoulder Radius R1 |
Base Radius R2 |
Approximate R-Value | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure |
| 4 | 0.5 | 4 | 0.813 | 8 | 50 | 6 | 1 |
| 6 | 0.5 | 9 | 1.219 | 10 | 70 | 6 | 2 |
| 8 | 1 | 12 | 1.625 | 16 | 80 | 8 | 2 |
| 10 | 1.5 | 15 | 2.031 | 20 | 90 | 10 | 2 |
| 12 | 1.5 | 18 | 2.438 | 24 | 100 | 12 | 2 |
| 16 | 2 | 24 | 2.465 | 32 | 140 | 16 | 2 |
| 20 | 2 | 30 | 2.607 | 40 | 150 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
● The TS coat consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness. Ideal for high-speed machining and dry machining of anything from raw carbon steel materials through to heat-treated / high hardness steel.
[ ! ] This product has a special groove shape with a performance that may not be reproducible without the use of Misumi dedicated re-grinding. 
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acier inoxydable / Fonte | Number of Flutes(sheet) | 4 | Model | Rayon à avance élevée |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| Additional Classification | Stocked Product |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Type
- TSC-MCR-HFEM4S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.