- Avis de Maintenance Préventive : Ce site sera indisponible en raison de la maintenance préventive de 3:00 21/4/2024 à 0:00 (CET) 22/4/2024. Nous nous excusons pour le désagrément.
TSC series carbide radius end mill, 4-flute / stub model
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
- TS
- General Steel
- 4 Flutes
- B (Stub)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-SHP-CR-EM4B2-R0.2 |
| TSC-SHP-CR-EM4B3-R0.2 |
| TSC-SHP-CR-EM4B4-R0.5 |
| TSC-SHP-CR-EM4B6-R0.5 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|
47.50 € | 1 | Disponible | 5 jours | 2 | 0.2 | 3 | 1 | |
54.74 € | 1 | Disponible | 5 jours | 3 | 0.2 | 4.5 | 1 | |
64.50 € | 1 | Disponible | 5 jours | 4 | 0.5 | 6 | 1 | |
94.09 € | 1 | Disponible | 5 jours | 6 | 0.5 | 9 | 2 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ||
| Outer Diameter D |
Radius R |
|||||
| TSC-SHP-CR-EM4B | 2 | 0.2 | 3 | 50 | 6 | 1 |
| 3 | 0.2 | 4.5 | 50 | 6 | 1 | |
| 4 | 0.5 | 6 | 50 | 6 | 1 | |
| 6 | 0.5 | 9 | 50 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It is designed to have an ideal flute length, shank length and overall length, keeping in mind the usage of a shrink fit holder for processing.
● A radius (R) accuracy within 5 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The highly accurate tools with minimal quality variation are suitable for realizing high-accuracy, high-precision machining.
● Designed to have a blade shape with an emphasis on sharpness thanks to the curved (R) positive blade, it is suitable for machining raw materials such as carbon steel.
● Improvements to the TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it delivers excellent durability when used in carbon steel raw materials, in addition to heat treated steel and hardened steel.
[ ! ]This product has a special shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Overall Length (L)(mm) | 50 | Shank Diameter (d)(mm) | 6 | Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting |
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | R Precision(μm) | ±0.005 |
| Additional Classification | Stocked Product |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Type
- TSC-SHP-CR-EM4B
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.