TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
- TS
- High-Hardness Steel
- 4 Flutes
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
62.05 € | 1 | Disponible | 5 jours | 3 | 0.75 | 1.2 | 60 | 6 | 7.5 | 2.7 | |
61.48 € | 1 | Disponible | 5 jours | 4 | 1 | 1.6 | 70 | 6 | 10 | 3.6 | |
68.89 € | 1 | Disponible | 5 jours | 5 | 1.2 | 2 | 80 | 6 | 12 | 4.5 | |
69.79 € | 1 | Disponible | 5 jours | 6 | 1 | 2.5 | 90 | 6 | 12 | 5.4 | |
76.46 € | 1 | Disponible | 5 jours | 6 | 1.5 | 2.5 | 90 | 6 | 12 | 5.4 | |
81.82 € | 1 | Disponible | 5 jours | 8 | 1 | 3.5 | 100 | 8 | 16 | 7.2 | |
102.70 € | 1 | Disponible | 5 jours | 8 | 2 | 3.5 | 100 | 8 | 16 | 7.2 | |
117.62 € | 1 | Disponible | 5 jours | 10 | 1 | 4 | 100 | 10 | 20 | 9 | |
103.53 € | 1 | Disponible | 5 jours | 10 | 2 | 4 | 100 | 10 | 20 | 9 | |
114.09 € | 1 | Disponible | 5 jours | 10 | 3 | 4 | 100 | 10 | 20 | 9 | |
137.14 € | 1 | Disponible | 5 jours | 12 | 1 | 5 | 110 | 12 | 24 | 11 | |
136.56 € | 1 | Disponible | 5 jours | 12 | 2 | 5 | 110 | 12 | 24 | 11 | |
138.71 € | 1 | Disponible | 5 jours | 12 | 3 | 5 | 110 | 12 | 24 | 11 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure | |||||||
| Outer Diameter D |
Radius R (Selection) |
||||||||||||
| TSC-CR-HFEM4N | 3 | 0.75 | 1.2 | 2.7 | 7.5 | 60 | 6 | 1 | |||||
| 4 | 1 | 1.6 | 3.6 | 10 | 70 | 6 | 1 | ||||||
| 5 | 1.2 | 2 | 4.5 | 12 | 80 | 6 | 1 | ||||||
| 6 | 1 | 1.5 | 2.5 | 5.4 | 12 | 90 | 6 | 2 | |||||
| 8 | 1 | 2 | 3.5 | 7.2 | 16 | 100 | 8 | 2 | |||||
| 10 | 1 | 2 | 3 | 4 | 9 | 20 | 100 | 10 | 2 | ||||
| 12 | 1 | 2 | 3 | 5 | 11 | 24 | 110 | 12 | 2 | ||||
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a negatively sharpened radius and non-twisted short blade length to realize a high rigidity and suppress chatter, even in pocket corners.
● Includes a back-taper that enables corners to be machined without the shoulder of the peripheral blade striking side surfaces.
● Just the one bit can be used for medium-finishing through to finishing with bottom surface machining, achieving a reduction in processing time.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acier inoxydable / Fonte | Number of Flutes(sheet) | 4 | Model | Rayon à avance élevée |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Without Torsion |
| R Precision(μm) | ±0.02 | Additional Classification | Stocked Product |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Type
- TSC-CR-HFEM4N
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.