TSC series carbide radius end mill, 4-flute, 45° spiral / short model (TSC-CR-HEM4S12-R2)
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Détails du produit:
Référence fabricant: TSC-CR-HEM4S12-R2
Marque: MISUMI
Prix: 69.79 €
Délai de livraison: 5 jours
Données techniques:
Outer Diameter (D): 12 φ
R Size: 2 mm
Flute Length (ℓ): 26 mm
Overall Length (L): 100 mm
Shank Diameter (d): 12 mm
- TS
- General Steel
- 4 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TSC-CR-HEM4S12-R2
Référence pièce
|
|---|
| TSC-CR-HEM4S12-R2 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
69.79 € | 1 | Disponible | 5 jours | 12 | 2 | 26 | 100 | 12 | - | Stocked Product | 2 |
Loading...
Spécifications
Model Number
TSC-CR-HEM4S (Stocked Product) / T-TSC-HEM4S (Manufactured Product)
| Outer Diameter D |
Radius |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
||||||
| 3 | 0.2 | 0.3 | 0.5 | 8 | 60 | 6 | 1 | ● | ||||
| 4 | 0.3 | 0.5 | 1 | 11 | 60 | 6 | 1 | ● | ||||
| 0.1 ~ 0.4 | □ | |||||||||||
| 5 | 0.3 | 0.5 | 1 | 13 | 60 | 6 | 1 | ● | ||||
| 0.1 ~ 0.4 | □ | |||||||||||
| 6 | 0.3 | 0.5 | 1 | 1.5 | 13 | 60 | 6 | 2 | ● | |||
| 0.1 ~ 0.9 | □ | |||||||||||
| 7 | 0.1 ~ 1.0 | 16 | 60 | 8 | 1 | □ | ||||||
| 7.5 | 0.1 ~ 1.0 | 16 | 60 | 8 | 1 | □ | ||||||
| 8 | 0.3 | 0.5 | 1 | 1.5 | 2 | 19 | 75 | 8 | 2 | ● | ||
| 0.1 ~ 1.4 | □ | |||||||||||
| 10 | 0.3 | 0.5 | 1 | 1.5 | 2 | 22 | 80 | 10 | 2 | ● | ||
| 0.1 ~ 1.9 | □ | |||||||||||
| 12 | 0.3 | 0.5 | 1 | 1.5 | 2 | 3 | 26 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | |||||||||||
| 16 | 2 | 3 | 32 | 105 | 16 | 2 | ● | |||||
| 0.1 ~ 2.9 | □ | |||||||||||
| 20 | 2 | 3 | 38 | 110 | 20 | 2 | ● | |||||
| 0.1 ~ 2.9 | □ | |||||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
For Coating Service, Refer to >>Click here.
For Carbide End Mill Coating Types and Features, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 |
Vous vous trouvez sur la page de TSC series carbide radius end mill, 4-flute, 45° spiral / short model, le numéro d'article est le suivant: TSC-CR-HEM4S12-R2.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-CR-HEM4S12-R2.
Configurer
Propriétés de base
-
Length Under Neck (ℓ1)(mm)
-
Type
- SN-TSC-CR-HEM4S
- SNR-TSC-CR-HEM4S
- TSC-CR-HEM4S
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| TSC-CR-HEM4S10-R1.5 |
| TSC-CR-HEM4S10-R2 |
| TSC-CR-HEM4S12-R0.3 |
| TSC-CR-HEM4S12-R3 |
| TSC-CR-HEM4S16-R2 |
| TSC-CR-HEM4S16-R3 |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
83.47 € | 1 | Disponible | 5 jours | 10 | 1.5 | 22 | 80 | 10 | - | Stocked Product | 2 | |
75.96 € | 1 | Disponible | 5 jours | 10 | 2 | 22 | 80 | 10 | - | Stocked Product | 2 | |
85.63 € | 1 | Disponible | 5 jours | 12 | 0.3 | 26 | 100 | 12 | - | Stocked Product | 2 | |
72.73 € | 1 | Disponible | 5 jours | 12 | 3 | 26 | 100 | 12 | - | Stocked Product | 2 | |
144.76 € | 1 | Disponible | 5 jours | 16 | 2 | 32 | 105 | 16 | - | Stocked Product | 2 | |
144.76 € | 1 | Disponible | 5 jours | 16 | 3 | 32 | 105 | 16 | - | Stocked Product | 2 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.