TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model
- Remise sur volume
- TS
- High-Hardness Steel
- 2 Flutes
- B (Stub)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-SHP-HBEM2B0.3 |
| TSC-SHP-HBEM2B0.5 |
| TSC-SHP-HBEM2B1 |
| TSC-SHP-HBEM2B1.5 |
| TSC-SHP-HBEM2B2 |
| TSC-SHP-HBEM2B3 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | R Precision (μm) | Outer Diameter D (mm) | Grip Length L1 (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
76.77 € | 1 | Disponible | 5 jours | 0.3 | 0.6 | ±0.003 | 0.6 | 37 | 1 | 10° | |
76.77 € | 1 | Disponible | 5 jours | 0.5 | 1 | ±0.003 | 1 | 36 | 1 | 10° | |
76.07 € | 1 | Disponible | 5 jours | 1 | 2 | ±0.003 | 2 | 35 | 1 | 10° | |
93.93 € | 1 | Disponible | 5 jours | 1.5 | 3 | ±0.003 | 3 | 33 | 1 | 10° | |
64.27 € | 1 | Disponible | 5 jours | 2 | 4 | ±0.003 | 4 | 32 | 1 | 10° | |
87.16 € | 1 | Disponible | 5 jours | 3 | 6 | -0.005 ~ +0.001 | 6 | 29 | 2 | - |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Grip Length L1 |
Figure | |
| Tip R |
|||||||
| TSC-SHP-HBEM2B | 0.3 | 0.6 | 0.6 | 40 | 6 | 37 | 1 |
| 0.5 | 1 | 1 | 40 | 6 | 36 | 1 | |
| 1 | 2 | 2 | 40 | 6 | 35 | 1 | |
| 1.5 | 3 | 3 | 40 | 6 | 33 | 1 | |
| 2 | 4 | 4 | 40 | 6 | 32 | 1 | |
| 3 | 6 | 6 | 40 | 6 | 29 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It is designed to have an ideal flute length, shank length and overall length, keeping in mind the usage of a shrink fit holder for processing.
● It is designed to have a blade shape with an emphasis on rigidity thanks to the ball (R) model negative blade. It is suitable for machining heat-treated steel / high hardness steel.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. It is ideal for high speed machining and dry machining of heat-treated / high hardness steel.
● R tolerance range within 6 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The high quality tools with minimal quality variation are suitable for high-precision 3-dimensional machining.
● The seamless shape (blade mounted in one step from the peripheral blade to the rounded center) results in a flat and smooth blade runout surface.
(TSC-SHP-HBEM2B only)
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acier inoxydable / Fonte | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Overall Length (L)(mm) | 40 | Shank Diameter (d)(mm) | 6 |
| Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Inventory Classification | Stocked Product | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
R Precision(μm)
-
Type
- TSC-SHP-HBEM2B
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.