Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model
- Remise sur volume
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| SEC-SS-ALHEM3B6.2 |
| SEC-SS-ALHEM3B8.2 |
| SEC-SS-ALHEM3B10.2 |
| SEC-SS-ALHEM3B12.2 |
| SEC-SS-ALHEM3B16.2 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | |
|---|---|---|---|---|---|---|---|---|
72.20 € | 1 | Disponible | 5 jours | 6.2 | 9 | 6 | 80 | |
107.27 € | 1 | Disponible | 5 jours | 8.2 | 12 | 8 | 100 | |
127.70 € | 1 | Disponible | 5 jours | 10.2 | 15 | 10 | 130 | |
140.36 € | 1 | Disponible | 5 jours | 12.2 | 18 | 12 | 150 | |
338.16 € | 1 | Disponible | 5 jours | 16.2 | 24 | 16 | 180 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| SEC-SS-ALHEM3B | 6.2 | 9 | 80 | 6 | 2 |
| 8.2 | 12 | 100 | 8 | 2 | |
| 10.2 | 15 | 130 | 10 | 2 | |
| 12.2 | 18 | 150 | 12 | 2 | |
| 16.2 | 24 | 180 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
● The shank relief also makes it suitable in cases where tool interference may be an issue.
● The corners of the blade tip are slightly rounded to prevent chipping when cutting.
● The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces. (SEC-LS-ALHEM3B Characteristics)
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. (SEC-SS-ALHEM3B Characteristics)
● It adopts a 3-flute shape to be strong against chatter and is capable of high-speed, high-efficiency machining of grooves. (SEC-SS-ALHEM3B Characteristics)
Informations de base
| Work Material | Aluminum Alloy / Copper Alloy / Graphite / Résine | Number of Flutes(sheet) | 3 | Model | Carré |
|---|---|---|---|---|---|
| Coating | Non revêtu | Processing Applications | Flat Surface / Side Surface / Rainure / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- SEC-SS-ALHEM3B
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.