AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
- Remise sur volume
- AS
- 4 Flutes
- R (Regular)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| ASPM-HRFPR6 |
| ASPM-HRFPR8 |
| ASPM-HRFPR10 |
| ASPM-HRFPR12 |
| ASPM-HRFPR14 |
| ASPM-HRFPR16 |
| ASPM-HRFPR20 |
| ASPM-HRFPR25 |
| ASPM-HRFPR30 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Processing Applications | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (θ) | Corner Chamfering C (mm) | Tolerance (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
54.30 € | 1 | Disponible | 5 jours | 6 | 19 | 3 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 6 | 63 | - | 0.2 ~ 0.7 | ±0.060 | |
60.34 € | 1 | Disponible | 5 jours | 8 | 28 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 10 | 78 | 15° | 0.2 ~ 0.7 | ±0.075 | |
66.21 € | 1 | Disponible | 5 jours | 10 | 34 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 10 | 84 | - | 0.2 ~ 0.7 | ±0.075 | |
83.21 € | 1 | Disponible | 5 jours | 12 | 40 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 12 | 97 | - | 0.2 ~ 0.7 | ±0.090 | |
102.01 € | 1 | Disponible | 5 jours | 14 | 40 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 12 | 97 | - | 0.2 ~ 0.7 | ±0.090 | |
122.66 € | 1 | Disponible | 5 jours | 16 | 48 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 16 | 108 | - | 0.3 ~ 0.9 | ±0.090 | |
94.16 € | 1 | Disponible | 5 jours | 20 | 56 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 20 | 122 | - | 0.3 ~ 0.9 | ±0.105 | |
134.63 € | 1 | Disponible | 5 jours | 25 | 68 | 4 | Flat Surface / Side Surface / Rainure / Inclined Cutting | 25 | 144 | - | 0.3 ~ 0.9 | ±0.105 | |
186.32 € | 1 | Disponible | 5 jours | 30 | 68 | 5 | Flat Surface / Side Surface / Inclined Cutting | 25 | 144 | - | 0.3 ~ 0.9 | ±0.105 |
Loading...
Spécifications
Model Number
ASPM-HRFPR
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Under Neck Angle θ |
Shank Diameter d |
Corner Chamfering C |
Number of Flutes Z |
| 6 | 19 | 63 | — | 6 | 0.2 ~ 0.7 | 3 |
| 8 | 28 | 78 | 15° | 10 | 0.2 ~ 0.7 | 4 |
| 10 | 34 | 84 | — | 10 | 0.2 ~ 0.7 | 4 |
| 12 | 40 | 97 | — | 12 | 0.2 ~ 0.7 | 4 |
| 14 | 40 | 97 | — | 12 | 0.2 ~ 0.7 | 4 |
| 16 | 48 | 108 | — | 16 | 0.3 ~ 0.9 | 4 |
| 20 | 56 | 122 | — | 20 | 0.3 ~ 0.9 | 4 |
| 25 | 68 | 144 | — | 25 | 0.3 ~ 0.9 | 4 |
| 30 | 68 | 144 | — | 25 | 0.3 ~ 0.9 | 5 |
| Outer Diameter D | Tolerance |
| 6 | ±0.060 |
| 8, 10 | ±0.075 |
| 12 ~ 16 | ±0.090 |
| 20 ~ 30 | ±0.105 |
For Cutting Conditions, Refer to >>Click here.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminium / Cuivre | Type of Flute | Ébauche | Tool Material Type | Powdered High-Speed Steel |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) | Base-Blade Availability | Included |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Processing Applications
- Flat Surface
- Side Surface
- Rainure
- Inclined Cutting
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- ASPM-HRFPR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.