Inscription
Configurer
MISUMI

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Référence pièce:

encore indéterminée. 92 références possibles.
    Quantité :

    Schéma d’ensemble

    Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image

    Liste des numéros de pièces

    Nombre d’articles
  • 1
  • 2
  • Suivant
    • Référence pièce
    SEC-REM2B4-R[0.1-1/0.1]
    SEC-REM2B4.5-R[0.1-1/0.1]
    SEC-REM2B5-R[0.1-1/0.1]
    SEC-REM2B5.5-R[0.1-1.2/0.1]
    SEC-REM2B6-R[0.1-1.2/0.1]
    SEC-REM2B8-R[0.1-2/0.1]
    SEC-REM2B10-R[0.1-3/0.1]
    SEC-REM2B12-R[0.1-3/0.1]
    SEC-REM2B16-R[0.1-3/0.1]
    SEC-REM2B20-R[0.1-3/0.1]
    SEC-REM2L4-R[0.1-1/0.1]
    SEC-REM2L5-R[0.1-1/0.1]
    SEC-REM2L6-R[0.1-1.2/0.1]
    SEC-REM2L8-R[0.1-2/0.1]
    SEC-REM2L10-R[0.1-3/0.1]
    SEC-REM2L12-R[0.1-3/0.1]
    SEC-REM2R2-R[0.1-0.5/0.1]
    SEC-REM2R2.5-R[0.1-0.5/0.1]
    SEC-REM2R2.8-R[0.1-0.5/0.1]
    SEC-REM2R3-R[0.1-0.7/0.1]
    SEC-REM2R3.5-R[0.1-0.7/0.1]
    SEC-REM2R4-R[0.1-1/0.1]
    SEC-REM2R4.5-R[0.1-1/0.1]
    SEC-REM2R5-R[0.1-1/0.1]
    SEC-REM2R5.5-R[0.1-1.2/0.1]
    SEC-REM2R6-R[0.1-1.2/0.1]
    SEC-REM2R8-R[0.1-2/0.1]
    SEC-REM2R10-R[0.1-3/0.1]
    SEC-REM2R12-R[0.1-3/0.1]
    SEC-REM2R16-R[0.1-3/0.1]
    SEC-REM2R20-R[0.1-3/0.1]
    SEC-REM2RL4-R[0.1-1/0.1]
    SEC-REM2RL5-R[0.1-1/0.1]
    SEC-REM2RL6-R[0.1-1.2/0.1]
    SEC-REM2RL8-R[0.1-2/0.1]
    SEC-REM2RL10-R[0.1-3/0.1]
    SEC-REM2RL12-R[0.1-3/0.1]
    SEC-REM2S2-R[0.1-0.5/0.1]
    SEC-REM2S2.5-R[0.1-0.5/0.1]
    SEC-REM2S2.8-R[0.1-0.5/0.1]
    SEC-REM2S3-R[0.1-0.7/0.1]
    SEC-REM2S3.5-R[0.1-0.7/0.1]
    SEC-REM2S4-R[0.1-1/0.1]
    SEC-REM2S4.5-R[0.1-1/0.1]
    SEC-REM2S5-R[0.1-1/0.1]
    SEC-REM2S5.5-R[0.1-1.2/0.1]
    SEC-REM2S6-R[0.1-1.2/0.1]
    SEC-REM2S8-R[0.1-2/0.1]
    SEC-REM2S10-R[0.1-3/0.1]
    SEC-REM2S12-R[0.1-3/0.1]
    SEC-REM2S16-R[0.1-3/0.1]
    SEC-REM2S20-R[0.1-3/0.1]
    SEC-REM2SR4-R[0.1-1/0.1]
    SEC-REM2SR5-R[0.1-1/0.1]
    SEC-REM2SR6-R[0.1-1.2/0.1]
    SEC-REM2SR8-R[0.1-2/0.1]
    SEC-REM2SR10-R[0.1-3/0.1]
    SEC-REM2SR12-R[0.1-3/0.1]
    SEC-REM4B3-R[0.1-0.7/0.1]
    SEC-REM4B4-R[0.1-1/0.1]

    Outer Diameter (D)

    (φ)

    R Size

    (mm)

    Work Material

    Flute Length (ℓ)

    (mm)

    Number of Flutes

    (sheet)

    Overall Length (L)

    (mm)

    Shank Diameter (d)

    (mm)

    Processing Applications

    Coating

    Figure

    		Quantité minimale de commande
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    4.5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6.75
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    7.5
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5.5
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    8.25
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    9
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12
    2
    60
    8
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    15
    2
    70
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    18
    2
    75
    12
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    16
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    100
    16
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    20
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    30
    2
    105
    20
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    16
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    20
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    60
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    32
    2
    100
    8
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    40
    2
    100
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    48
    2
    100
    12
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    2
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    2
    45
    4
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    2.5
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    7.5
    2
    45
    4
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    2.8
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    8.4
    2
    45
    4
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    3
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    9
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    3.5
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    10.5
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    4.5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    13.5
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    15
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    5.5
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    16.5
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    18
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    70
    8
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    30
    2
    80
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    36
    2
    85
    12
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    16
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    48
    2
    115
    16
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    20
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    60
    2
    125
    20
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    14
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    17.5
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    21
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    28
    2
    70
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    35
    2
    80
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    42
    2
    95
    12
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    2
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    4
    2
    40
    4
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    2.5
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    5
    2
    40
    4
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    2.8
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    5.6
    2
    40
    4
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    3
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    3.5
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    7
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    8
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    4.5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    9
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    10
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5.5
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    11
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    16
    2
    55
    8
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    20
    2
    65
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    75
    12
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    16
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    32
    2
    100
    16
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    20
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    40
    2
    105
    20
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    10
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12.5
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    1
    1 pièces
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    15
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    20
    2
    70
    6
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    25
    2
    80
    10
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    30
    2
    85
    12
    Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting
    Non revêtu
    2
    1 pièces
    3
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    4.5
    4
    45
    6
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    Non revêtu
    1
    1 pièces
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    4
    45
    6
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    Non revêtu
    1
    1 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
    -
    ( - )
    7 jours ouvrables
  • 1
  • 2
  • Suivant

    • Plus d'informations

    Informations de base

    Radius in 0.1 mm increments can be additionally machined with a short delivery time

    Spécifications et prix

    Spécifications

    Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image


    Model Number
    SEC-REM2B / TSC-REM2B
    SEC-REM4B     / TSC-REM4B (1.5 D Blade Length Type)
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.74.54561
    3.50.1 ~ 0.75.254561
    40.1 ~ 1.064561
    4.50.1 ~ 1.06.754561
    50.1 ~ 1.07.54561
    5.50.1 ~ 1.08.254561
    60.1 ~ 1.294562
    80.1 ~ 2.0126082
    100.1 ~ 3.01570102
    120.1 ~ 3.01875122
    160.1 ~ 3.024100162
    200.1 ~ 3.030105202

    Model Number
    SEC-REM2S / TSC-REM2S
    SEC-REM4S     / TSC-REM4S (2 D Blade Length Type)
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    20.1 ~ 0.544041
    2.50.1 ~ 0.554041
    2.80.1 ~ 0.55.64041
    30.1 ~ 0.764561
    3.50.1 ~ 0.774561
    40.1 ~ 1.084561
    4.50.1 ~ 1.094561
    50.1 ~ 1.0104561
    5.50.1 ~ 1.0114561
    60.1 ~ 1.2124562
    80.1 ~ 2.0165582
    100.1 ~ 3.02065102
    120.1 ~ 3.02475122
    160.1 ~ 3.032100162
    200.1 ~ 3.040105202

    Model Number
    SEC-REM2SR / TSC-REM2SR (2.5 D Blade Length Type)
     * There is no standard for 4 flutes.iece
    1 Piece Unit
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.77.54561
    40.1 ~ 1.0105061
    50.1 ~ 1.012.55561
    60.1 ~ 1.2156062
    80.1 ~ 2.0207082
    100.1 ~ 3.02580102
    120.1 ~ 3.03085122

    Model Number
    SEC-REM2R / TSC-REM2R
    SEC-REM4R     / TSC-REM4R (3 D Blade Length Type)
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    20.1 ~ 0.564541
    2.50.1 ~ 0.57.54541
    2.80.1 ~ 0.58.44541
    30.1 ~ 0.794561
    3.50.1 ~ 0.710.54561
    40.1 ~ 1.0125061
    4.50.1 ~ 1.013.55061
    50.1 ~ 1.0155561
    5.50.1 ~ 1.016.55561
    60.1 ~ 1.2186062
    80.1 ~ 2.0247082
    100.1 ~ 3.03080102
    120.1 ~ 3.03685122
    160.1 ~ 3.048115162
    200.1 ~ 3.060125202

    Model Number
    SEC-REM2RL / TSC-REM2RL (3.5 D Blade Length Type)
     * There is no standard for 4 flutes.
    1 Piece Unit
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.710.54561
    40.1 ~ 1.0145061
    50.1 ~ 1.017.55561
    60.1 ~ 1.2216062
    80.1 ~ 2.0287082
    100.1 ~ 3.03580102
    120.1 ~ 3.04295122

    Model Number
    SEC-REM2L / TSC-REM2L (4 D Blade Length Type) 
    * There is no standard for 4 flutes.
    1 Piece Unit
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.7125061
    40.1 ~ 1.0166061
    50.1 ~ 1.0206061
    60.1 ~ 1.2246062
    80.1 ~ 2.03210082
    100.1 ~ 3.040100102
    120.1 ~ 3.048100122


    For Cutting Conditions, Refer to >>Click here.