DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| DLC-SC-SDR6.8-24 |
| DLC-SF-SDR8.5-20 |
| DLC-SF-SDR8.5-30 |
| DLC-SF-SDR10.3-36 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | Step Length ℓ (mm) | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | Use | Major Diameter D1 (φ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
113.95 € | 1 | Disponible | 5 jours | 6.8 | 48 | 104 | 24 | 10 | 0 ~ -0.018 | 0 ~ -0.009 | For Chamfering | 10 | |
101.88 € | 1 | Disponible | 5 jours | 8.5 | 50 | 112 | 20 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | Cutting | 12 | |
120.73 € | 1 | Disponible | 5 jours | 8.5 | 60 | 122 | 30 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | Cutting | 12 | |
151.42 € | 1 | Disponible | 5 jours | 10.3 | 72 | 136 | 36 | 14 | 0 ~ -0.022 | 0 ~ -0.011 | Cutting | 14 |
Loading...
Spécifications
| Model Number | Step Length ℓ | Large Diameter D1 | Groove Length ℓ1 | Overall Length L | Shank Diameter d | |
| Tip Diameter D | ||||||
| DLC-SC-SDR (For chamfering) DLC-SF-SDR (For cutting) | 3.4 | 8 | 6 | 21 | 73 | 6 |
| 12 | 6 | 25 | 77 | 6 | ||
| 4.3 | 10 | 7 | 26 | 79 | 7 | |
| 15 | 7 | 31 | 84 | 7 | ||
| 5.1 | 12 | 8 | 30 | 84 | 8 | |
| 18 | 8 | 36 | 90 | 8 | ||
| 6.8 | 16 | 10 | 40 | 96 | 10 | |
| 24 | 10 | 48 | 104 | 10 | ||
| 8.5 | 20 | 12 | 50 | 112 | 12 | |
| 30 | 12 | 60 | 122 | 12 | ||
| 10.3 | 24 | 14 | 60 | 124 | 14 | |
| 36 | 14 | 72 | 136 | 14 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● The DLC coating has excellent wear-resistant and welding-resistant properties that make it ideal for machining non-ferrous metals such as aluminum, copper, etc.
● A strong torsion shape provides superior discharge of cutting chips and cutting capability.
● Designed for very frequent drilling of pilot holes for M4 – M12 metric coarse thread.
● Two models of step angle are available for chamfering and cutting.
● High-efficiency hole drilling is achieved by reducing the chamfering process. (DLC-SC-SDR)
● When drilling pilot holes for bolts, relief holes can also be drilled at the same time. (DLC-SF-SDR)
Informations de base
| work material | Fonte / Aluminium / Cuivre | Tool Material Type | Carbure | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | DLC | With/without Oil Hole | None |
| Point Angle(°) | 130 | Thinning | Included |
Configurer
Propriétés de base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Step Length ℓ(mm)
-
Type
- DLC-SC-SDR
- DLC-SF-SDR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.