MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
- Remise sur volume
- MR
- General Steel
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
36.54 € | 1 | Disponible | 5 jours | 0.1 | 0.4 | 50 | 4 | ±0.005 | 0.2 | 1 | 10° | |
39.66 € | 1 | Disponible | 5 jours | 0.1 | 0.4 | 50 | 6 | ±0.005 | 0.2 | 1 | 10° | |
21.04 € | 1 | Disponible | 5 jours | 0.2 | 0.8 | 50 | 4 | ±0.005 | 0.4 | 1 | 10° | |
24.85 € | 1 | Disponible | 5 jours | 0.2 | 0.8 | 50 | 6 | ±0.005 | 0.4 | 1 | 10° | |
18.91 € | 1 | Disponible | 5 jours | 0.3 | 1.2 | 50 | 4 | ±0.005 | 0.6 | 1 | 10° | |
24.55 € | 1 | Disponible | 5 jours | 0.3 | 1.2 | 50 | 6 | ±0.005 | 0.6 | 1 | 10° | |
18.91 € | 1 | Disponible | 5 jours | 0.4 | 1.6 | 50 | 4 | ±0.005 | 0.8 | 1 | 10° | |
24.55 € | 1 | Disponible | 5 jours | 0.4 | 1.6 | 50 | 6 | ±0.005 | 0.8 | 1 | 10° | |
17.35 € | 1 | Disponible | 5 jours | 0.5 | 2 | 50 | 4 | ±0.005 | 1 | 1 | 10° | |
22.87 € | 1 | Disponible | 5 jours | 0.5 | 2 | 50 | 6 | ±0.005 | 1 | 1 | 10° | |
23.97 € | 1 | Disponible | 5 jours | 0.6 | 2.4 | 50 | 4 | ±0.005 | 1.2 | 1 | 10° | |
23.97 € | 1 | Disponible | 5 jours | 0.7 | 2.8 | 50 | 4 | ±0.005 | 1.4 | 1 | 10° | |
24.85 € | 1 | Disponible | 5 jours | 0.8 | 3 | 50 | 4 | ±0.005 | 1.6 | 1 | 10° | |
27.50 € | 1 | Disponible | 5 jours | 0.9 | 3 | 50 | 4 | ±0.005 | 1.8 | 1 | 10° | |
27.94 € | 1 | Disponible | 5 jours | 0.15 | 0.6 | 50 | 4 | ±0.005 | 0.3 | 1 | 10° | |
19.29 € | 1 | Disponible | 5 jours | 0.25 | 1 | 50 | 4 | ±0.005 | 0.5 | 1 | 10° | |
37.14 € | 1 | Disponible | 5 jours | 0.65 | 2.6 | 50 | 4 | ±0.005 | 1.3 | 1 | 10° | |
20.79 € | 1 | Disponible | 5 jours | 0.75 | 3 | 50 | 4 | ±0.005 | 1.5 | 1 | 10° | |
24.25 € | 1 | Disponible | 5 jours | 0.75 | 3 | 50 | 6 | ±0.005 | 1.5 | 1 | 10° | |
15.41 € | 1 | Disponible | 5 jours | 1 | 3 | 50 | 4 | ±0.005 | 2 | 1 | 10° | |
20.72 € | 1 | Disponible | 5 jours | 1 | 3 | 50 | 6 | ±0.005 | 2 | 1 | 10° | |
37.14 € | 1 | Disponible | 5 jours | 1.1 | 3 | 50 | 4 | ±0.005 | 2.2 | 1 | 10° | |
37.14 € | 1 | Disponible | 5 jours | 1.2 | 3 | 50 | 4 | ±0.005 | 2.4 | 1 | 10° | |
37.25 € | 1 | Disponible | 5 jours | 1.3 | 3.5 | 50 | 4 | ±0.005 | 2.6 | 1 | 10° | |
37.25 € | 1 | Disponible | 5 jours | 1.4 | 3.5 | 50 | 4 | ±0.005 | 2.8 | 1 | 10° | |
20.44 € | 1 | Disponible | 5 jours | 1.5 | 4 | 60 | 4 | ±0.005 | 3 | 1 | 10° | |
18.98 € | 1 | Disponible | 5 jours | 1.5 | 4 | 60 | 6 | ±0.005 | 3 | 1 | 10° | |
37.25 € | 1 | Disponible | 5 jours | 1.6 | 4 | 50 | 4 | ±0.005 | 3.2 | 1 | 10° | |
37.25 € | 1 | Disponible | 5 jours | 1.7 | 4 | 50 | 4 | ±0.005 | 3.4 | 1 | 10° | |
37.25 € | 1 | Disponible | 5 jours | 1.8 | 5 | 50 | 4 | ±0.005 | 3.6 | 1 | 10° | |
37.25 € | 1 | Disponible | 5 jours | 1.9 | 5 | 50 | 4 | ±0.005 | 3.8 | 1 | 10° | |
24.06 € | 1 | Disponible | 5 jours | 1.25 | 3.5 | 60 | 6 | ±0.005 | 2.5 | 1 | 10° | |
35.87 € | 1 | Disponible | 5 jours | 1.75 | 5 | 50 | 4 | ±0.005 | 3.5 | 1 | 10° | |
21.71 € | 1 | Disponible | 5 jours | 2 | 6 | 50 | 4 | ±0.005 | 4 | 2 | - | |
22.84 € | 1 | Disponible | 5 jours | 2 | 6 | 70 | 6 | ±0.005 | 4 | 1 | 10° | |
20.92 € | 1 | Disponible | 5 jours | 2 | 6 | 50 | 6 | ±0.005 | 4 | 2 | - | |
47.02 € | 1 | Disponible | 5 jours | 2.2 | 6 | 50 | 6 | ±0.005 | 4.4 | 1 | 10° | |
47.02 € | 1 | Disponible | 5 jours | 2.3 | 6 | 50 | 6 | ±0.005 | 4.6 | 1 | 10° | |
47.02 € | 1 | Disponible | 5 jours | 2.4 | 6 | 50 | 6 | ±0.005 | 4.8 | 1 | 10° | |
26.03 € | 1 | Disponible | 5 jours | 2.5 | 8 | 80 | 6 | ±0.005 | 5 | 1 | 10° | |
44.62 € | 1 | Disponible | 5 jours | 2.6 | 8 | 50 | 6 | ±0.005 | 5.2 | 1 | 10° | |
47.02 € | 1 | Disponible | 5 jours | 2.15 | 6 | 50 | 6 | ±0.005 | 4.3 | 1 | 10° | |
44.62 € | 1 | Disponible | 5 jours | 2.75 | 8 | 50 | 6 | ±0.005 | 5.5 | 1 | 10° | |
26.84 € | 1 | Disponible | 5 jours | 3 | 10 | 90 | 6 | ±0.005 | 6 | 2 | - | |
26.83 € | 1 | Disponible | 5 jours | 3 | 10 | 50 | 6 | ±0.005 | 6 | 2 | - | |
39.74 € | 1 | Disponible | 5 jours | 3.5 | 12 | 100 | 8 | ±0.005 | 7 | 1 | 10° | |
51.46 € | 1 | Disponible | 5 jours | 4 | 13 | 100 | 8 | ±0.005 | 8 | 2 | - | |
40.12 € | 1 | Disponible | 5 jours | 4 | 13 | 50 | 8 | ±0.005 | 8 | 2 | - | |
62.96 € | 1 | Disponible | 5 jours | 4.5 | 14 | 100 | 10 | ±0.005 | 9 | 1 | 10° | |
66.91 € | 1 | Disponible | 5 jours | 5 | 15 | 100 | 10 | ±0.005 | 10 | 2 | - | |
57.04 € | 1 | Disponible | 5 jours | 5 | 15 | 60 | 10 | ±0.005 | 10 | 2 | - | |
113.79 € | 1 | Disponible | 5 jours | 5.5 | 15 | 110 | 12 | ±0.005 | 11 | 1 | 10° | |
103.47 € | 1 | Disponible | 5 jours | 6 | 15 | 110 | 12 | ±0.005 | 12 | 2 | - | |
152.78 € | 1 | Disponible | 5 jours | 7 | 15 | 110 | 12 | ±0.01 | 14 | 3 | - | |
181.03 € | 1 | Disponible | 5 jours | 8 | 20 | 140 | 16 | ±0.01 | 16 | 2 | - | |
281.27 € | 1 | Disponible | 5 jours | 10 | 25 | 150 | 20 | ±0.01 | 20 | 2 | - |
Loading...
Spécifications
| Model Number | Shank Diameter d | Overall Length L | Blade Length ℓ | Flute Diameter D | Figure | |||
| Tip R | Shank Diameter d | Overall Length L | ||||||
| MRC-HBEM2S | 0.1 | - | - | 4 | 50 | 0.4 | 0.2 | 1 |
| 0.1 | 6 | - | 6 | 50 | 0.4 | 0.2 | 1 | |
| 0.15 | - | - | 4 | 50 | 0.6 | 0.3 | 1 | |
| 0.2 | - | - | 4 | 50 | 0.8 | 0.4 | 1 | |
| 0.2 | 6 | - | 6 | 50 | 0.8 | 0.4 | 1 | |
| 0.25 | - | - | 4 | 50 | 1 | 0.5 | 1 | |
| 0.3 | - | - | 4 | 50 | 1.2 | 0.6 | 1 | |
| 0.3 | 6 | - | 6 | 50 | 1.2 | 0.6 | 1 | |
| 0.4 | - | - | 4 | 50 | 1.6 | 0.8 | 1 | |
| 0.4 | 6 | - | 6 | 50 | 1.6 | 0.8 | 1 | |
| 0.5 | - | - | 4 | 50 | 2 | 1 | 1 | |
| 0.5 | 6 | - | 6 | 50 | 2 | 1 | 1 | |
| 0.6 | - | - | 4 | 50 | 2.4 | 1.2 | 1 | |
| 0.65 | - | - | 4 | 50 | 2.6 | 1.3 | 1 | |
| 0.7 | - | - | 4 | 50 | 2.8 | 1.4 | 1 | |
| 0.75 | - | - | 4 | 50 | 3 | 1.5 | 1 | |
| 0.75 | 6 | - | 6 | 50 | 3 | 1.5 | 1 | |
| 0.8 | - | - | 4 | 50 | 3 | 1.6 | 1 | |
| 0.9 | - | - | 4 | 50 | 3 | 1.8 | 1 | |
| 1 | - | - | 4 | 50 | 3 | 2 | 1 | |
| 1 | 6 | - | 6 | 50 | 3 | 2 | 1 |
| Model Number | Shank Diameter d | Overall Length L | Blade Length ℓ | Flute Diameter D | Figure | |||
| Tip R | Shank Diameter d | Overall Length L | ||||||
| MRC-HBEM2S | 1.1 | - | - | 4 | 50 | 3 | 2.2 | 1 |
| 1.2 | - | - | 4 | 50 | 3 | 2.4 | 1 | |
| 1.25 | - | - | 6 | 60 | 3.5 | 2.5 | 1 | |
| 1.3 | - | - | 4 | 50 | 3.5 | 2.6 | 1 | |
| 1.4 | - | - | 4 | 50 | 3.5 | 2.8 | 1 | |
| 1.5 | - | - | 4 | 60 | 4 | 3 | 1 | |
| 1.5 | 6 | - | 6 | 60 | 4 | 3 | 1 | |
| 1.6 | - | - | 4 | 50 | 4 | 3.2 | 1 | |
| 1.7 | - | - | 4 | 50 | 4 | 3.4 | 1 | |
| 1.75 | - | - | 4 | 50 | 5 | 3.5 | 1 | |
| 1.8 | - | - | 4 | 50 | 5 | 3.6 | 1 | |
| 1.9 | - | - | 4 | 50 | 5 | 3.8 | 1 | |
| 2 | - | - | 4 | 50 | 6 | 4 | 2 | |
| 2 | 6 | - | 6 | 70 | 6 | 4 | 1 | |
| 2 | 6 | 50 | 6 | 50 | 6 | 4 | 1 | |
| 2.15 | - | - | 6 | 50 | 6 | 4.3 | 1 | |
| 2.2 | - | - | 6 | 50 | 6 | 4.4 | 1 | |
| 2.3 | - | - | 6 | 50 | 6 | 4.6 | 1 | |
| 2.4 | - | - | 6 | 50 | 6 | 4.8 | 1 | |
| 2.5 | - | - | 6 | 80 | 8 | 5 | 1 | |
| 2.6 | - | - | 6 | 50 | 8 | 5.2 | 1 | |
| 2.75 | - | - | 6 | 50 | 8 | 5.5 | 1 | |
| 3 | - | - | 6 | 90 | 10 | 6 | 2 | |
| 3 | 6 | 50 | 6 | 50 | 10 | 6 | 2 | |
| 3.5 | - | - | 8 | 100 | 12 | 7 | 1 | |
| 4 | - | - | 8 | 100 | 13 | 8 | 2 | |
| 4 | 8 | 50 | 8 | 50 | 13 | 8 | 2 | |
| 4.5 | - | - | 10 | 100 | 14 | 9 | 1 | |
| 5 | - | - | 10 | 100 | 15 | 10 | 2 | |
| 5 | 10 | 60 | 10 | 60 | 15 | 10 | 2 | |
| 5.5 | - | - | 12 | 110 | 15 | 11 | 1 | |
| 6 | - | - | 12 | 110 | 15 | 12 | 2 | |
| 7 | - | - | 12 | 110 | 15 | 14 | 3 | |
| 8 | - | - | 16 | 140 | 20 | 16 | 2 | |
| 10 | - | - | 20 | 150 | 25 | 20.0 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Both an overwhelmingly good worked surface accuracy and high durability have been achieved with our own particular tip shape and newly developed MR coating.
● A new standard product for Misumi with improvements to everything ranging from the material itself to the grinding process and the coating.
● An outstanding surface accuracy is seen, especially when machining heat-treated steel.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acier inoxydable / Fonte | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | MRC | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Inventory Classification | Stocked Product |
| Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
R Precision(μm)
-
Type
- MRC-HBEM2S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.