Confirmé

Outer Diameter (D)(φ)
- 1.2
Flute Length (ℓ)(mm)
- 1.8
Shank Diameter (d)(mm)
- 4
Overall Length (L)(mm)
- 50
Length Under Neck (ℓ1)(mm)
- 6
Geometry
- Avec engagement
Type
- XAL-EM2LB
Jours d'expédition estimés
- Tout
- Dans les 5 jours ouvrables

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model (XAL-EM2LB1.2-6)

Référence pièce:

XAL-EM2LB1.2-6

Réinitialiser

Schéma d’ensemble
Liste des numéros de pièces
Plus d'informations

Schéma d’ensemble

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image

Liste des numéros de pièces

Nombre d’articles

Référence pièce

XAL-EM2LB1.2-6

Outer Diameter (D)

(φ)

Flute Length (ℓ)

(mm)

Shank Diameter (d)

(mm)

Overall Length (L)

(mm)

Length Under Neck (ℓ1)

(mm)

Geometry

Figure

Under Neck Diameter d1

(mm)

Actual Effective Length Depends on Work Inclination Angle 30'

(mm)

Actual Effective Length Depends on Work Inclination Angle 1°

(mm)

Actual Effective Length Depends on Work Inclination Angle 2°

(mm)

Actual Effective Length Depends on Work Inclination Angle 3°

(mm)

Length Under Neck (θ)

Quantité minimale de commande

1.2

1.8

Avec engagement

1.15

6.28

6.59

7.32

8.24

10°

1 pièces

Prix unitaire (hors TVA)(Prix unitaire TTC)	Jour d'expédition standard

14.60 €

( 17.37 € )

5 jours ouvrables

Plus d'informations

Informations de base
Spécifications et prix
Caractéristiques et exemples d’utilisation

Informations de base

The long-awaited long-neck type joins the popular XAL Series

Spécifications et prix

Spécifications

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.1	0.3	-	4	No Standards	●	0.2	0.085	50	10°	0.31	0.33	0.37	0.41	1
	0.5			No Standards	●					0.52	0.55	0.61	0.69
	1			No Standards	●					1.05	1.1	1.22	1.37
0.2	0.5	-	4	No Standards	●	0.3	0.18	50	10°	0.52	0.55	0.61	0.69	1
	1			●	●					1.05	1.1	1.22	1.37
	1.5			●	●					1.57	1.65	1.83	2.06
	2			No Standards	●					2.09	2.2	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			No Standards	●					3.14	3.3	3.66	4.12
	3.5			No Standards	●					3.66	3.85	4.27	4.81
	4			No Standards	●					4.19	4.4	4.88	5.49
0.3	1	-	4	●	●	0.45	0.28	50	10°	1.05	1.1	1.22	1.37	1
	1.5			No Standards	●					1.57	1.65	1.83	2.06
	2			●	●					2.09	2.2	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			●	●					3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	5			●	●					5.24	5.49	6.1	6.87
	6			No Standards	●					6.28	6.59	7.32	8.24
	9			No Standards	●					9.42	9.89	10.98	12.36
0.4	1	-	4	No Standards	●	0.6	0.37	50	10°	1.05	1.1	1.22	1.37	1
	2	-	4	●	●				10°	2.09	2.2	2.44	2.75
	2	6	6	No Standards	●				15°	2.06	2.13	2.28	2.45
	3	-	4	●	●				10°	3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	5			●	●					5.24	5.49	6.1	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			No Standards	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.5	1	-	4	No Standards	●	0.7	0.46	50	10°	1.05	1.1	1.22	1.37	1
	2			●	●					2.09	2.2	2.44	2.75
	3			No Standards	●					3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	4	6	6	●	●				15°	4.13	4.26	4.56	4.91
	5	-	4	No Standards	●				10°	5.24	5.49	6.1	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.6
0.6	2	-	4	●	●	0.9	0.56	50	10°	2.09	2.2	2.44	2.75	1
	3			No Standards	●					3.14	3.3	3.66	4.12
	4			●	●					4.19	4.4	4.88	5.49
	4	6	6	No Standards	●				15°	4.13	4.26	4.56	4.91
	6	-	4	●	●				10°	6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.6
	18			No Standards	●			70		18.85	19.78	21.97	24.71
0.7	2	-	4	●	●	1.05	0.66	50	10°	2.09	2.2	2.44	2.75	1
	4			●	●					4.19	4.4	4.88	5.49
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
0.8	4	-	4	●	●	1.2	0.76	50	10°	4.19	4.4	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	20			No Standards	●			70		20.94	21.98	24.41	27.46
	24			No Standards	●			70		25.13	26.38	29.29	Without Interference
0.9	4	-	4	No Standards	●	1.35	0.85	50	10°	4.19	4.4	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	15			No Standards	●					15.71	16.48	18.31	20.6
1	3	-	4	No Standards	●	1.5	0.95	50	10°	3.14	3.3	3.66	4.12	1
	4			●	●					4.19	4.4	4.88	5.49
	5			No Standards	●					5.24	5.49	6.1	6.87
	6			●	●					6.28	6.59	7.32	8.24
	6	6	6	●	●				15°	6.19	6.39	6.84	7.36
	7	-	4	No Standards	●				10°	7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	22			No Standards	●					23.04	24.18	26.85	Without Interference
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
1.2	6	-	4	●	●	1.8	1.15	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	16			●	●					16.75	17.58	19.53	21.97
1.4	6	-	4	No Standards	●	2.1	1.35	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
1.5	4	-	4	No Standards	●	2.3	1.45	50	10°	4.19	4.4	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			●	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
	30			No Standards	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
1.6	6	-	4	No Standards	●	2.4	1.55	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	26			No Standards	●					27.22	28.57	31.73	Without Interference
1.8	6	-	4	No Standards	●	2.7	1.75	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
2	6	-	4	●	●	3	1.95	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	10	6	6	●	●				15°	10.31	10.65	11.4	12.27
	12	-	4	●	●				10°	12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	Without Interference
	18			●	●			70		18.85	19.78	21.97	Without Interference
	20			●	●					20.94	21.98	24.41	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
	60			No Standards	●					62.83	Without Interference	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
2.5	8	-	4	●	●	3.8	2.4	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	Without Interference
	14			No Standards	●					14.66	15.39	17.09	Without Interference
	16			●	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	Without Interference	Without Interference
	20			●	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	40			No Standards	●			100		41.88	Without Interference	Without Interference	Without Interference
	50			No Standards	●			100		52.35	Without Interference	Without Interference	Without Interference
3	8	-	6	●	●	4.5	2.9	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●			70		14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●					18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference
	40			●	●			100		41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
4	12	-	6	●	●	6	3.8	50	10°	12.57	13.19	14.65	16.48	1
	16			●	●			50		16.75	17.58	19.53	Without Interference
	20			●	●			70		20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			●	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
5	16	-	6	●	●	7.5	4.8	70	10°	16.75	17.58	Without Interference	Without Interference	1
	20			No Standards	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			No Standards	●					31.41	Without Interference	Without Interference	Without Interference
	35			●	●			100		36.65	Without Interference	Without Interference	Without Interference
	40			No Standards	●					41.88	Without Interference	Without Interference	Without Interference
	50			●	●					52.35	Without Interference	Without Interference	Without Interference
6	20	-	6	●	●	9	5.8	70	-	Without Interference	Without Interference	Without Interference	Without Interference	2
	30			●	●			70		Without Interference	Without Interference	Without Interference	Without Interference
	40			●	●			100		Without Interference	Without Interference	Without Interference	Without Interference
	50			●	●					Without Interference	Without Interference	Without Interference	Without Interference
	60			●	●					Without Interference	Without Interference	Without Interference	Without Interference

[ ! ]>For shank diameter (d) specifications listed in blue, specify a blade diameter (D), shank length (ℓ1) and shank diameter (d).

Caractéristiques et exemples d’utilisation

Plus d'informations

● The ideal length under neck can be selected for workpiece machining in deep areas.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. It cannot be used with conduction model tool setters.

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model:Related Image

[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.

La référence pièce a été confirmé