VAC Series Carbide 2-Flute Long Neck Square End Mill (VAC-PEM2LB1.5-8)

Spécifications

Model Number
VAC-PEM2LB

Flute Diameter D	Length Under Neck ℓ1	Blade Length ℓ	Overall Length L	Shank Diameter d	Actual Effective Length Depends on Work Inclination Angle					Figure
					0.5°	1°	1.5°	2°	3°
0.2	0.5	0.3	40	4	0.62	0.65	0.69	0.73	0.83	1
	1				1.14	1.20	1.27	1.35	1.54	1
0.3	1	0.5	40	4	1.14	1.20	1.27	1.35	1.54	1
	2				2.19	2.31	2.45	2.60	2.97	1
	3				3.25	3.42	3.62	3.85	4.39	1
0.4	1	0.6	40	4	1.14	1.20	1.27	1.35	1.54	1
	2				2.19	2.31	2.45	2.60	2.97	1
	3				3.25	3.42	3.62	3.85	4.39	1
	4				4.30	4.53	4.80	5.09	5.81	1
0.5	2	0.7	45	4	2.25	2.38	2.52	2.67	3.05	1
	3				3.31	3.49	3.69	3.92	4.47	1
	4				4.36	4.60	4.86	5.16	5.89	1
	5				5.41	5.71	6.04	6.41	7.32	1
	6				6.46	6.82	7.21	7.66	8.74	1
0.6	2	0.9	45	4	2.25	2.38	2.52	2.67	3.05	1
	3				3.31	3.49	3.69	3.92	4.47	1
	4				4.36	4.60	4.86	5.16	5.89	1
	5				5.41	5.71	6.04	6.41	7.32	1
	6				6.46	6.82	7.21	7.66	8.74	1
	8				8.57	9.04	9.56	10.15	11.41	1
0.7	4	1.2	45	4	4.36	4.60	4.86	5.16	5.89	1
0.8	2	1.2	45	4	2.25	2.38	2.52	2.67	3.05	1
	3				3.31	3.49	3.69	3.92	4.47	1
	4				4.36	4.60	4.86	5.16	5.89	1
	6				6.46	6.82	7.21	7.66	8.74	1
	8				8.57	9.04	9.56	10.15	11.29	1
	10				10.67	11.26	11.91	12.65	13.63	1
1	2	1.5	50	4	2.25	2.38	2.52	2.67	3.05	1
	3				3.31	3.49	3.69	3.92	4.47	1
	4				4.36	4.60	4.86	5.16	5.89	1
	5				5.41	5.71	6.04	6.41	7.32	1
	6				6.46	6.82	7.21	7.66	8.74	1
	8				8.57	9.04	9.56	10.15	11.18	1
	10				10.67	11.26	11.91	12.65	13.52	1
	12				12.77	13.48	14.26	15.01	15.85	1
	16				16.98	17.92	18.93	19.43	20.53	1

Model Number
VAC-PEM2LB

Flute Diameter D	Length Under Neck	Flute Length ℓ	Overall Length L	Shank Diameter d	Actual Effective Length Depends on Work Inclination Angle					Figure
					0.5°	1°	1.5°	2°	3°
1.2	6	1.8	50	4	6.46	6.82	7.21	7.66	8.73	1
	8				8.57	9.04	9.56	10.15	11.06	1
	10				10.67	11.26	11.91	12.65	13.40	1
	12				12.77	13.48	14.26	14.90	15.74	1
1.5	4	2.3	50	4	4.36	4.60	4.86	5.16	5.89	1
	6				6.46	6.82	7.21	7.66	8.56	1
	8				8.57	9.04	9.56	10.15	10.89	1
	10				10.67	11.26	11.91	12.53	13.23	1
	12				12.77	13.48	14.26	14.74	15.57	1
	14				14.88	15.70	16.51	16.95	17.90	1
	16				16.98	17.92	18.67	19.16	20.24	1
2	6	3	50	4	6.46	6.82	7.21	7.66	8.27	1
	8				8.57	9.04	9.56	10.04	10.60	1
	10				10.67	11.26	11.91	12.25	12.94	1
	12				12.77	13.48	14.09	14.47	15.28	1
	14				14.88	15.70	16.25	16.68	17.61	1
	16				16.98	17.92	18.40	18.89	19.95	1
	20				21.19	22.14	22.71	23.31	24.62	1
	30		70		31.71	32.64	33.49	34.38	36.31	1
3	8	4.5	50	6	8.86	9.35	9.89	10.51	11.40	1
	10				10.97	11.57	12.24	13.00	13.73	1
	12				13.07	13.79	14.59	15.22	16.07	1
	14		60		15.18	16.01	16.94	17.43	18.41	1
	16				17.28	18.23	19.13	19.64	20.74	1
	20				21.49	22.67	23.44	24.07	25.42	1
	26		65		27.80	29.15	29.91	30.70	32.43	1
4	12	6	50	6	13.07	13.79	14.29	14.67	15.50	1
	16		60		17.28	18.13	18.60	19.10	20.17	1
	20				21.49	22.34	22.91	23.52	24.84	1
	26		65		27.80	28.64	29.38	30.16	31.85	1
	30		70		32.01	32.84	33.69	34.58	36.52	1
6	15	9	60	6	15.66	16.05	16.46	16.90	17.85	2
	20				20.78	21.30	21.85	22.43	23.69	2
	30		70		31.02	31.81	32.63	33.49	35.37	2
	32		90		33.07	33.91	34.78	35.71	37.71	2
8	25	12	70	8	26.19	26.85	27.54	28.27	29.86	2
	30		80		31.31	32.10	32.93	33.80	35.70	2
	42		100		43.61	44.70	45.86	47.08	49.72	2
10	30	15	75	10	31.31	32.10	32.93	33.80	35.70	2
	35		80		36.43	37.35	38.32	39.33	41.54	2
	45		100		46.68	47.85	49.09	50.39	53.22	2
12	35	20	80	12	36.43	37.35	38.32	39.33	41.54	2
	40		90		41.56	42.60	43.70	44.86	47.38	2
	50		110		51.80	53.11	54.48	55.93	59.06	2

Exemple d'utilisation

● The ideal length under neck can be selected for workpiece machining in deep areas
● We now newly stock blade diameters of 8 mm or more
[ ! ]The electrical conductivity is minimal. 

 
[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.