Vanne de dosage avec silencieux, série SMW2
Small, light weight and high flow. Push lock style. All plastic materials. Note: CAD data of this series is being revised. Please wait till the corrections are done.
[Features]
· Small, light weight and high flow: Compared to the traditional series, it achieves 50% decrease in volume and 80% decrease in mass, which is drastically smaller and lighter weight, as well as having the largest effective base area of the class.
· More than 23dB(A) of noise cancellation effect. The noise cancellation effect is increased by integrating a P sintered body element with the body.
· Adopted a push lock type needle.
· A knob with a push lock style is adopted to securely lock the needle with one touch.
· Environmental design: No need to separate it when disposed, as all plastic materials are used.
[Features]
· Small, light weight and high flow: Compared to the traditional series, it achieves 50% decrease in volume and 80% decrease in mass, which is drastically smaller and lighter weight, as well as having the largest effective base area of the class.
· More than 23dB(A) of noise cancellation effect. The noise cancellation effect is increased by integrating a P sintered body element with the body.
· Adopted a push lock type needle.
· A knob with a push lock style is adopted to securely lock the needle with one touch.
· Environmental design: No need to separate it when disposed, as all plastic materials are used.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Informations de base
| Type | Déplacement de type réglable | Corps principal | Résine | Diam. d'alésage du raccordement de tuyau | R |
|---|---|---|---|---|---|
| Couvercle | Disponible | Élément | Frittage à base de résine | Section effective [classification](mm2) | Jusqu'à 10 |
| Unité de commande(pièce) | 1 |
Configurer
Propriétés de base
-
Débit(l/min)
-
Section effective(mm2)
-
Vis de montage nominale
- 1/8
- 1/4
-
Diamètre extérieur(Ø)
-
Type
- SMW2
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.