Inscription
Configurer
  • Stock
  • Diamètre intérieur d1(Ø)
  • du moyeu d2(Ø)
  • Longueur totale b1(mm)
  • Max. Vélocité admissible V(m/s)

    La valeur varie selon la lubrification actuelle. Consulter les spécifications du fabricant.

  • Épaisseur T(mm)
  • Type
  • CAO
  • Jours d'expédition estimés
    • Tout
    • Possibilité d’expédition le jour même
    • IGUS

    Coussinets / plastique (iglidur) / XSM (XSM-1517-07)

    Coussinets / plastique (iglidur) / XSM XSM-1517-07

    Référence pièce:

    XSM-1517-07
    Réinitialiser
    Quantité :

    Informations sur le produit

    iglidur® X | The Chemical and Temperature Specialist, Sleeve Bearing (Form S)

    Product Information


    Up to 150 MPa static
    iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
    When to use it?
    • For pressure loads up to 150 MPa
    • For linear movements with stainless steel at high temperatures
    • Universal resistance to chemicals
    • Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
    • Very low moisture absorption
    • High wear resistance over the entire temperature range
    When not to use it?
    • For very low wear at high loads
       ►iglidur® Q
       ►iglidur® Z
    • For economical underwater applications
       ►iglidur® H
       ►iglidur® H370
    • For edge pressure
       ►iglidur® Z
    Typical application areas
    • Beverage technology
    • Woodworking
    • Plastic processing industry
    • Aerospace engineering
    • Cleanroom

    Material Properties

    General propertiesUnitiglidur® XTesting method
    Densityg/cm31.44 
    Colour black 
    Max. moisture absorption at +23 °C/50 % r.h.% weight0.1DIN 53495
    Max. water absorption% weight0.5 
    Coefficient of sliding friction, dynamic, against steelμ0.09–0.27 
    pv value, max. (dry)MPa · m/s1.32 
    Mechanical properties
    Flexural modulusMPa8,100DIN 53457
    Flexural strength at +20 °CMPa170DIN 53452
    Compressive strengthMPa100 
    Max. recommended surface pressure (+20 °C)MPa150 
    Shore-D hardness 85DIN 53505
    Physical and thermal properties
    Max. long-term application temperature°C+250 
    Max. short-term application temperature°C+315 
    Min. long-term application temperature°C–100 
    Heat conductivityW/m · K0.6ASTM C 177
    Coefficient of thermal expansion (at +23 °C)K–1 · 10–55DIN 53752
    Electrical properties5)
    Specific contact resistanceΩcm< 105DIN IEC 93
    Surface resistanceΩ< 103DIN 53482
    5) The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.

    Dimensions

    Sleeve Bearing (Form S)

    2) Thickness < 1 mm: chamfer = 20°
     
    Chamfer in relation to the d1
    d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
    f [mm]:0.30.50.81.2



    Dimensions [mm]
    d1d1-d2b1Part No.
     Tolerance3) h13 
    2.0+0.006
    +0.046    		3.53.0XSM-0203-03
    3.04.53.0XSM-0304-03
    3.04.56.0XSM-0304-06
    4.0+0.010
    +0.058    		5.54.0XSM-0405-04
    4.05.56.0XSM-0405-06
    4.05.09.0XSM-0405-09
    4.05.510.0XSM-0405-10
    5.07.03.5XSM-0507-035
    5.07.05.0XSM-0507-05
    5.07.08.0XSM-0507-08
    5.07.010.0XSM-0507-10
    6.08.06.0XSM-0608-06
    6.08.08.0XSM-0608-08
    6.08.010.0XSM-0608-10
    6.08.013.8XSM-0608-13
    7.0+0.013
    +0.071    		9.010.0XSM-0709-10
    7.09.012.0XSM-0709-12
    8.010.06.0XSM-0810-06
    8.010.08.0XSM-0810-08
    8.010.010.0XSM-0810-10
    8.010.012.0XSM-0810-12
    8.010.015.0XSM-0810-15
    10.012.03.5XSM-1012-035
    10.012.06.0XSM-1012-06
    10.012.08.0XSM-1012-08
    10.012.010.0XSM-1012-10
    10.012.012.0XSM-1012-12
    10.012.015.0XSM-1012-15
    10.012.020.0XSM-1012-20
    12.0+0.016
    +0.086    		14.03.5XSM-1214-035
    12.014.06.0XSM-1214-06
    12.014.08.0XSM-1214-08
    12.014.010.0XSM-1214-10
    12.014.012.0XSM-1214-12
    12.014.015.0XSM-1214-15
    12.014.020.0XSM-1214-20
    12.014.025.0XSM-1214-25
    13.015.010.0XSM-1315-10
    13.015.020.0XSM-1315-20
    14.016.012.0XSM-1416-12
    14.016.015.0XSM-1416-15
    14.016.020.0XSM-1416-20
    14.016.025.0XSM-1416-25
    15.017.07.0XSM-1517-07
    15.017.010.0XSM-1517-10
    15.017.015.0XSM-1517-15
    15.017.020.0XSM-1517-20
    15.017.025.0XSM-1517-25
    16.018.010.0XSM-1618-10
    16.018.012.0XSM-1618-12
    16.018.015.0XSM-1618-15
    16.018.020.0XSM-1618-20
    16.018.025.0XSM-1618-25
    16.018.035.0XSM-1618-35
    17.019.020.0XSM-1719-20
    18.020.015.0XSM-1820-15
    18.020.020.0XSM-1820-20
    18.020.025.0XSM-1820-25
    20.0+0.020
    +0.104    		22.014.0XSM-2022-140
    20.022.014.5XSM-2022-145
    20.022.017.0XSM-2022-17
    20.022.018.0XSM-2022-18
    20.022.020.0XSM-2022-20
    20.023.07.0XSM-2023-07
    20.023.010.0XSM-2023-10
    20.023.015.0XSM-2023-15
    20.023.020.0XSM-2023-20
    20.023.025.0XSM-2023-25
    20.023.030.0XSM-2023-30
    22.025.015.0XSM-2225-15
    22.025.020.0XSM-2225-20
    22.025.025.0XSM-2225-25
    22.025.030.0XSM-2225-30
    24.026.020.0XSM-2426-20
    24.027.06.0XSM-2427-06
    24.027.015.0XSM-2427-15
    24.027.020.0XSM-2427-20
    24.027.025.0XSM-2427-25
    24.027.030.0XSM-2427-30
    25.028.07.7XSM-2528-077
    25.028.09.0XSM-2528-09
    25.028.012.0XSM-2528-12
    25.028.013.0XSM-2528-13
    25.028.015.0XSM-2528-15
    25.028.020.0XSM-2528-20
    25.028.025.0XSM-2528-25
    25.028.030.0XSM-2528-30
    25.028.035.0XSM-2528-35
    26.028.010.0XSM-2628-10
    27.030.05.7XSM-2730-05
    28.032.020.0XSM-2832-20
    28.032.025.0XSM-2832-25
    28.032.030.0XSM-2832-30
    28.032.069.0XSM-2832-69
    30.034.015.0XSM-3034-15
    30.034.020.0XSM-3034-20
    30.034.025.0XSM-3034-25
    30.034.030.0XSM-3034-30
    30.034.040.0XSM-3034-40
    32.0+0.025
    +0.125    		36.020.0XSM-3236-20
    32.036.025.0XSM-3236-25
    32.036.030.0XSM-3236-30
    32.036.035.0XSM-3236-35
    32.036.040.0XSM-3236-40
    32.036.054.0XSM-3236-54
    35.039.020.0XSM-3539-20
    35.039.030.0XSM-3539-30
    35.039.040.0XSM-3539-40
    35.039.050.0XSM-3539-50
    40.044.020.0XSM-4044-20
    40.044.030.0XSM-4044-30
    40.044.040.0XSM-4044-40
    40.044.050.0XSM-4044-50
    45.050.020.0XSM-4550-20
    45.050.030.0XSM-4550-30
    45.050.040.0XSM-4550-40
    45.050.050.0XSM-4550-50
    50.055.020.0XSM-5055-20
    50.055.030.0XSM-5055-30
    50.055.040.0XSM-5055-40
    50.055.050.0XSM-5055-50
    50.055.060.0XSM-5055-60
    55.0+0.030
    +0.150    		60.050.0XSM-5560-50
    60.065.045.0XSM-6065-45
    60.065.060.0XSM-6065-60
    65.070.050.0XSM-6570-50
    70.075.070.0XSM-7075-70
    75.080.060.0XSM-7580-60
    80.085.0100.0XSM-8085-100
    90.0+0.036
    +0.176    		95.0100.0XSM-9095-100
    100.0115.0100.0XSM-100105-100
    110.0115.0100.0XSM-110115-100
    120.0125.0100.0XSM-120125-100
    3) After press-fit.

    Liste des numéros de pièces

    Nombre d’articles
  • 1
    • Référence pièce
    XSM-1517-07

    Type

    Diamètre intérieur d1

    (Ø)

    du moyeu d2

    (Ø)

    Longueur totale b1

    (mm)

    Plage de valeur PV maximale admissible

    (N/mm2•m/s)

    Max. Vélocité admissible V

    (m/s)

    Tolérance de l'arbre recommandée

    Épaisseur T

    (mm)

    Plage de températures de fonctionnement

    (°C)

    		RoHS?Quantité minimale de commande
    -
    15
    17
    15
    -
    10
    -
    1
    -
    10
    1 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    5.96 €3.16 €
    ( 3.76 € )
    Article en stock : 1 jour ouvrableDisponible pour une expédition le jour même
  • 1

    • Plus d'informations

    Informations de base

    iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.