Inscription
Confirmé
  • Diamètre intérieur d1(Ø)
  • du moyeu d2(Ø)
  • Longueur totale b1(mm)
  • Plage de valeur PV maximale admissible(N/mm2•m/s)
  • Max. Vélocité admissible V(m/s)

    La valeur varie selon la lubrification actuelle. Consulter les spécifications du fabricant.

  • Tolérance de l'arbre recommandée
  • Diamètre extérieur de l'embase d3(mm)
  • Type
  • CAO
  • Jours d'expédition estimés
    • Tout
    • Dans les 4 jours ouvrables
IGUS

Coussinets / avec collerette / matière plastique (iglidur) / XFM (XFM-5055-40)

Coussinets / avec collerette / matière plastique (iglidur) / XFM XFM-5055-40

Référence pièce:

XFM-5055-40
Réinitialiser
Quantité :
Loading...

Informations sur le produit

iglidur® X | The Chemical and Temperature Specialist, Flange Bearing (Form F)

Product Information


Up to 150 MPa static
iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
When to use it?
• For pressure loads up to 150 MPa
• For linear movements with stainless steel at high temperatures
• Universal resistance to chemicals
• Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
• Very low moisture absorption
• High wear resistance over the entire temperature range
When not to use it?
• For very low wear at high loads
   ►iglidur® Q
   ►iglidur® Z
• For economical underwater applications
   ►iglidur® H
   ►iglidur® H370
• For edge pressure
   ►iglidur® Z
Typical application areas
• Beverage technology
• Woodworking
• Plastic processing industry
• Aerospace engineering
• Cleanroom

Material Properties

General propertiesUnitiglidur® XTesting method
Densityg/cm31.44 
Colour black 
Max. moisture absorption at +23 °C/50 % r.h.% weight0.1DIN 53495
Max. water absorption% weight0.5 
Coefficient of sliding friction, dynamic, against steelμ0.09–0.27 
pv value, max. (dry)MPa · m/s1.32 
Mechanical properties
Flexural modulusMPa8,100DIN 53457
Flexural strength at +20 °CMPa170DIN 53452
Compressive strengthMPa100 
Max. recommended surface pressure (+20 °C)MPa150 
Shore-D hardness 85DIN 53505
Physical and thermal properties
Max. long-term application temperature°C+250 
Max. short-term application temperature°C+315 
Min. long-term application temperature°C–100 
Heat conductivityW/m · K0.6ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–55DIN 53752
Electrical properties5)
Specific contact resistanceΩcm< 105DIN IEC 93
Surface resistanceΩ< 103DIN 53482
5) The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.

Dimensions

Flange Bearing (Form F)

2) Thickness < 1 mm: chamfer = 20°
 
Chamfer in relation to the d1
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2



Dimensions [mm]
d1d1-d2d3b1b2Part No.
 Tolerance3) d13h13–0.14 
2.0+0.006
+0.046		4.06.03.01.0XFM-020406-03
3.04.57.55.00.75XFM-0304-05
4.0+0.010
+0.058		5.59.54.00.75XFM-0405-04
4.05.59.56.00.75XFM-0405-06
4.05.58.06.00.75XFM-040508-06
5.07.011.05.01.0XFM-0507-05
6.08.012.04.01.0XFM-0608-04
6.08.012.08.01.0XFM-0608-08
6.08.012.010.01.0XFM-0608-10
8.0+0.013
+0.071		10.015.05.51.0XFM-0810-05
8.010.015.07.51.0XFM-0810-07
8.010.015.08.01.0XFM-0810-08
8.010.015.09.01.0XFM-0810-09
8.010.012.04.01.0XFM-081012-04
8.010.014.031.51.0XFM-081014-31
9.011.015.018.00.5XFM-0911-18
10.012.018.05.01.0XFM-1012-05
10.012.018.06.01.0XFM-1012-06
10.012.018.07.01.0XFM-1012-07
10.012.015.08.01.0XFM-1012-08
10.012.018.09.01.0XFM-1012-09
10.012.018.012.01.0XFM-1012-12
10.012.018.015.01.0XFM-1012-15
10.012.018.017.01.0XFM-1012-17
10.012.018.018.01.0XFM-1012-18
10.012.015.022.01.0XFM-1012-22
10.012.018.025.01.0XFM-1012-25
12.0+0.016
+0.086		14.020.05.51.0XFM-1214-055
12.014.020.07.01.0XFM-1214-07
12.014.020.09.01.0XFM-1214-09
12.014.020.012.01.0XFM-1214-12
12.014.020.015.01.0XFM-1214-15
12.014.020.017.01.0XFM-1214-17
12.014.018.03.91.0XFM-121418-039
12.0+0.016
+0.086		14.018.05.91.0XFM-121418-059
14.016.022.010.01.0XFM-1416-10
14.016.022.012.01.0XFM-1416-12
14.016.022.017.01.0XFM-1416-17
15.017.023.06.01.0XFM-1517-06
15.017.023.09.01.0XFM-1517-09
15.017.023.012.01.0XFM-1517-12
15.017.023.017.01.0XFM-1517-17
16.018.024.012.01.0XFM-1618-12
16.018.024.017.01.0XFM-1618-17
18.020.026.012.01.0XFM-1820-12
18.020.026.017.01.0XFM-1820-17
18.020.026.022.01.0XFM-1820-22
20.0+0.020
+0.104		23.030.06.51.5XFM-2023-065
20.023.030.07.51.5XFM-2023-075
20.023.030.011.01.5XFM-2023-11
20.023.030.016.51.5XFM-2023-16
20.023.030.021.01.5XFM-2023-21
25.028.035.011.51.5XFM-2528-11
25.028.035.013.51.5XFM-2528-13
25.028.035.016.51.5XFM-2528-16
25.028.035.021.01.5XFM-2528-21
25.028.033.08.01.0XFM-252833-08
27.030.038.020.01.5XFM-2730-20
30.034.042.016.02.0XFM-3034-16
30.034.042.026.02.0XFM-3034-26
30.034.042.040.02.0XFM-3034-40
32.0+0.025
+0.125		36.045.015.02.0XFM-3236-15
32.036.045.026.02.0XFM-3236-26
35.039.047.016.02.0XFM-3539-16
35.039.047.026.02.0XFM-3539-26
40.044.052.022.02.0XFM-4044-22
40.044.052.030.02.0XFM-4044-30
40.044.052.040.02.0XFM-4044-40
45.050.058.050.02.0XFM-4550-50
50.055.063.040.02.0XFM-5055-40
60.0+0.030
+0.150		65.073.040.02.0XFM-6065-40
70.075.083.040.02.0XFM-7075-40
75.080.088.050.02.0XFM-7580-50
3) After press-fit.

Liste des numéros de pièces

Nombre d’articles
  • 1
    • Référence pièce
    XFM-5055-40

    Type

    Diamètre intérieur d1

    (Ø)

    du moyeu d2

    (Ø)

    Longueur totale b1

    (mm)

    Plage de valeur PV maximale admissible

    (N/mm2•m/s)

    Max. Vélocité admissible V

    (m/s)

    Tolérance de l'arbre recommandée

    Épaisseur T

    (mm)

    Plage de températures de fonctionnement

    (°C)

    Diamètre extérieur de l'embase d3

    (mm)

    		RoHS?Quantité minimale de commande
    Type à embase
    50
    55
    40
    1,1 à 2,0
    1.5
    h9
    -
    -
    63
    -
    1 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    56.52 €
    ( 67.26 € )
    4 jours ouvrables
  • 1

    • Plus d'informations

    Informations de base

    iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.

    La référence pièce a été confirmé