Conduit flexible Conduit N.S.D.
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Référence pièce
|
|---|
| DC-NS-D-038-[1-30/1] |
| DC-NS-D-065-[1-30/1] |
| DC-NS-D-100-[1-30/1] |
| DC-NS-D-125-[1-20/1] |
| Référence pièce | Quantité minimale de commande | Remise sur volume | Diamètre intérieur (mm) | Diamètre extérieur (mm) | Pression admissible maximale (température normale) (MPa) | Rayon de pliure admissible (mm) | Diamètre nominal en mm (pouces) | Length (m) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 14 jours | 38.1 | 44.5 | 0.06 | 38 | 38(1 1/2) | 1 ～ 30 | ||
| 1 | 14 jours | 62.4 | 71.6 | 0.04 | 65 | 65(2 1/2) | 1 ～ 30 | ||
| 1 | 15 jours | 101.0 | 110.5 | 0.03 | 100 | 100(4) | 1 ～ 30 | ||
| 1 | 10 jours | 125.9 | 137 | 0.02 | 125 | 125(5) | 1 ～ 20 |
Loading...
Informations de base
| Matériau | Élastomère thermoplastique + Résine oléfinique | Utilisation du service de découpe | Disponible | Propriétés | Standard / Performance antistatique / Résistance à la chaleur |
|---|---|---|---|---|---|
| Couleur | Gris | Fluide applicable | Air | Plage de températures de fonctionnement(°C) | -20::70 |
Configurer
Propriétés de base
-
Diamètre intérieur(mm)
-
Diamètre extérieur(mm)
-
Pression admissible maximale (température normale)(MPa)
-
Diamètre nominal en mm (pouces)
-
Length(m)
-
Type
- DC-NS-D
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.