Flexible pour flexible pour outils pneumatiques Quattro (haute pression)
A high-pressure hose supporting a maximum working pressure of 4 MPa.
[Features]
· Ultra flexible. Improved slip characteristics. A high-pressure supporting a maximum working pressure of 4 MPa.
· Supporting a maximum working pressure of 4 MPa, this high-pressure specification drastically improves working speed.
· Using the manufacturer's original new formulation of special materials, the hose is snag-resistant and difficult to break.
· Slides flexibly and smoothly. Excellent flexibility.
· In comparison to conventional high-pressure hoses, the Hose Quattro provides greater flexibility with enhanced maneuverability while working.
· Using the manufacturer's original new formulation on the surface of the hose, the slide performance has been significantly improved to prevent the hose from snagging and breaking.
· In addition, a line has been added the surface of the hose so that you readily see if the hose is twisted.
[Features]
· Ultra flexible. Improved slip characteristics. A high-pressure supporting a maximum working pressure of 4 MPa.
· Supporting a maximum working pressure of 4 MPa, this high-pressure specification drastically improves working speed.
· Using the manufacturer's original new formulation of special materials, the hose is snag-resistant and difficult to break.
· Slides flexibly and smoothly. Excellent flexibility.
· In comparison to conventional high-pressure hoses, the Hose Quattro provides greater flexibility with enhanced maneuverability while working.
· Using the manufacturer's original new formulation on the surface of the hose, the slide performance has been significantly improved to prevent the hose from snagging and breaking.
· In addition, a line has been added the surface of the hose so that you readily see if the hose is twisted.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Informations de base
| Liquide | Air | Utilisation du service de découpe | NA | D.I. nominal d | 6 |
|---|---|---|---|---|---|
| Diamètre extérieur(Ø) | 10 | Propriétés | Résistance à la pression / Flexibilité | Matériau de la couche interne du flexible | Élastomère spécial |
| Raccord utilisé | Deux côtés | Couleur de la couche externe | Rose, ligne jaune | Type à raccords en métal | Autre |
| Rayon de pliage minimum(mm) | 18 | Plage de températures de fonctionnement(°C) | -5::60 | Plage de pression de fonctionnement(MPa) | ::4.0 |
| Spécifications de coupleur | Coupleur à simple pression pour utilisation dans des applications à haute pression |
Configurer
Propriétés de base
-
Longueur standard(m)
-
Type
- QHC
Filtrer par jours d'expédition standard
-
- Tous les articles
- 9 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.