Manchon STB 11080
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
STB11080X75-N
- Données produit
- Données CAO non disponibles
Informations de base
| Matériau du corps principal | EN-JL 1030 équiv. | Type | Composants associés | Application | Standard |
|---|---|---|---|---|---|
| Nombre de trous de boulons n | 2 | Taille de boulon | Vis de serrage à six pans creux (spéciale pour pointes de vis) M16X32 | Nominal | 11080 |
| Diamètre extérieur(mm) | 110 | Diamètre maximal du trou d'arbre d(mm) | 75 | Diamètre d'alésage de l'arbre standard | 75 |
| Type de manchons | X | Type de clé | Clavette nouvelle norme JIS |
Vous vous trouvez sur la page de Manchon STB 11080, le numéro d'article est le suivant: STB11080X75-N.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article STB11080X75-N.
Configurer
Propriétés de base
-
Type
- STB11080
Filtrer par jours d'expédition standard
-
- Tous les articles
- 9 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.