Confirmé

Type
CAO
- 3D
Jours d'expédition estimés
- Tout
- Possibilité d’expédition le jour même

Cimblots oscillants (22731.0392)

Catalogue

Référence pièce:

22731.0392

Réinitialiser

Informations sur le produit
Liste des numéros de pièces
Plus d'informations
Catalogue

Informations sur le produit

Self-Aligning Pads, EH 22730.

Product Description

Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements.

Material

Ball
• Ball-bearing steel, hardened, bright
• Stainless steel 1.3541, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated

Notes

Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.

Drawing

picture 1 picture 2 picture 3 picture 4

Order Information

Dimensions							Location hole		WS	Load capacity for static load max.	Tightening torque max.	Weight	Art. No.
d₁	d₂	d₃	l₁	l₂	l₃	ball diameter	Ø	Depth
				-0.5	max.		H7	min.
[mm]							[mm]		[mm]	[kN]	[Nm]	[g]
with male thread, flat-faced ball, bearing surface plain – picture 1, heat-treated steel
13	M 6	7.2	13	8	–	10	–	–	11	10	10.0	12.0	22730.0012
13	M 8	7.2	13	8	–	10	–	–	11	10	25.0	13.0	22730.0013
20	M 8	10.5	18	10	–	16	–	–	17	25	25.0	39.0	22730.0018
20	M10	10.5	18	10	–	16	–	–	17	25	46.0	40.0	22730.0019
20	M12	10.5	18	12	–	16	–	–	17	25	82.0	43.0	22730.0020
30	M16	20.0	27	16	–	25	–	–	27	90	206.0	151.0	22730.0030
50	M20	34.5	35	20	–	40	–	–	41	165	407.0	489.0	22730.0050
50	M24	34.5	35	24	–	40	–	–	41	165	698.0	518.0	22730.0060
with male thread, flat-faced ball, bearing surface plain – picture 1, stainless steel
13	M 6	7.2	13	8	–	10	–	–	11	10	10.0	12.0	22730.0112
13	M 8	7.2	13	8	–	10	–	–	11	10	25.0	13.0	22730.0113
20	M 8	10.5	18	10	–	16	–	–	17	25	25.0	38.0	22730.0118
20	M10	10.5	18	10	–	16	–	–	17	25	46.0	40.0	22730.0119
20	M12	10.5	18	12	–	16	–	–	17	25	82.0	44.0	22730.0120
30	M16	20.0	27	16	–	25	–	–	27	90	206.0	150.0	22730.0130
50	M20	34.5	35	20	–	40	–	–	41	165	407.0	482.0	22730.0150
50	M24	34.5	35	24	–	40	–	–	41	165	698.0	512.0	22730.0160
with male thread, flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel
13	M 6	7.2	13	8	–	10	–	–	11	10	10.0	12.0	22730.0312
13	M 8	7.2	13	8	–	10	–	–	11	10	25.0	13.0	22730.0313
20	M 8	10.5	18	10	–	16	–	–	17	25	25.0	38.0	22730.0318
20	M10	10.5	18	10	–	16	–	–	17	25	46.0	40.0	22730.0319
20	M12	10.5	18	12	–	16	–	–	17	25	82.0	43.0	22730.0320
30	M16	20.0	27	16	–	25	–	–	27	90	206.0	149.0	22730.0330
50	M20	34.5	35	20	–	40	–	–	41	165	407.0	484.0	22730.0350
50	M24	34.5	35	24	–	40	–	–	41	165	698.0	513.0	22730.0360
for locating hole, flat-faced ball, bearing surface plain – picture 3, heat-treated steel
12 n6	M 3	7.2	11	–	3.2	10	12	6	–	10¹⁾	1.3	8.0	22730.0412
18 n6	M 4	10.5	17	–	4.0	16	18	8	–	25¹⁾	2.9	29.0	22730.0418
28 n6	M 5	20.0	25	–	5.5	25	28	13	–	90¹⁾	6.0	109.0	22730.0428
for locating hole, flat-faced ball, bearing surface plain – picture 3, stainless steel
12 n6	M 3	7.2	11	–	3.2	10	12	6	–	10¹⁾	1.3	7.9	22730.0452
18 n6	M 4	10.5	17	–	4.0	16	18	8	–	25¹⁾	2.9	29.0	22730.0458
28 n6	M 5	20.0	25	–	5.5	25	28	13	–	90¹⁾	6.0	108.0	22730.0468
for locating hole, flat-faced ball, bearing surface ribbed – picture 4, heat-treated steel
12 n6	M 3	7.2	11	–	3.2	10	12	6	–	10¹⁾	1.3	7.9	22730.0712
18 n6	M 4	10.5	17	–	4.0	16	18	8	–	25¹⁾	2.9	29.0	22730.0718
28 n6	M 5	20.0	25	–	5.5	25	28	13	–	90¹⁾	6.0	108.0	22730.0728

¹⁾ Applies only when the minimum bore depth is kept to.

Application Example

Self-Aligning Pads • with hard metal ball, ribbed, EH 22730.

Product Description

Especially designed for cast parts (hard casting crust). To be used as support, thrust pad and for build into clamping elements.

Material

Ball
• Hard metal, ribbed, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated

Notes

Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.

Drawing

Order Information

Dimensions						WS	Load capacity for static load max.	Tightening torque max.	Weight	Art. No.
d₁	d₂	d₃	l₁	l₂	ball diameter			Tightening torque max.
			±0.2	-0.5
[mm]						[mm]	[kN]	[Nm]	[g]
with male thread, flat-faced ball, bearing surface ribbed, heat-treated steel
13	M 6	8.3	13	8	10	11	10	10	14	22730.0362
13	M 8	8.3	13	8	10	11	10	25	15	22730.0363
20	M 8	13.2	18	10	16	17	25	25	49	22730.0378
20	M10	13.2	18	10	16	17	25	46	50	22730.0379
20	M12	13.2	18	12	16	17	25	82	54	22730.0380
30	M16	20.0	27	16	25	27	90	206	186	22730.0381
50	M20	34.5	35	20	40	41	165	407	633	22730.0382
50	M24	34.5	35	24	40	41	165	698	664	22730.0383
with male thread, flat-faced ball, bearing surface ribbed, stainless steel
13	M 6	8.3	13	8	10	11	10	10	14	22730.0390
13	M 8	8.3	13	8	10	11	10	25	15	22730.0392
20	M 8	13.2	18	10	16	17	25	25	48	22730.0394
20	M10	13.2	18	10	16	17	25	46	50	22730.0396
20	M12	13.2	18	12	16	17	25	82	54	22730.0398
30	M16	20.0	27	16	25	27	90	206	186	22730.0399
50	M20	34.5	35	20	40	41	165	407	632	22730.0400
50	M24	34.5	35	24	40	41	165	698	660	22730.0401

Application Example

Self-Aligning Pads • self-resetting, EH 22731.

Product Description

Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements.
By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece.

Material

Spring element
• Thermoplastic PUR
Ball
• Ball-bearing steel, hardened, bright
• Stainless steel 1.3541, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated

Notes

Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.

Drawing

picture 1 picture 2 picture 3 picture 4

Order Information

Dimensions							Location hole		WS	Load capacity for static load max.	Tightening torque max.	Weight	Art. No.
d₁	d₂	d₃	l₁	l₂	l₃	ball diameter	Ø	Depth
				-0.5	max.		H7	min.
[mm]							[mm]		[mm]	[kN]	[Nm]	[g]
with male thread, flat-faced ball, bearing surface plain – picture 1, heat-treated steel
13	M 6	7.2	13	8	–	10	–	–	11	10	10.0	12	22731.0012
13	M 8	7.2	13	8	–	10	–	–	11	10	25.0	13	22731.0013
20	M 8	10.5	18	10	–	16	–	–	17	25	25.0	38	22731.0018
20	M10	10.5	18	10	–	16	–	–	17	25	46.0	40	22731.0019
20	M12	10.5	18	12	–	16	–	–	17	25	82.0	43	22731.0020
30	M16	20.0	27	16	–	25	–	–	27	90	206.0	149	22731.0030
50	M20	34.5	35	20	–	40	–	–	41	165	407.0	486	22731.0050
50	M24	34.5	35	24	–	40	–	–	41	165	698.0	516	22731.0060
with male thread, flat-faced ball, bearing surface plain – picture 1, stainless steel
13	M 6	7.2	13	8	–	10	–	–	11	10	10.0	12	22731.0112
13	M 8	7.2	13	8	–	10	–	–	11	10	25.0	13	22731.0113
20	M 8	10.5	18	10	–	16	–	–	17	25	25.0	38	22731.0118
20	M10	10.5	18	10	–	16	–	–	17	25	46.0	39	22731.0119
20	M12	10.5	18	12	–	16	–	–	17	25	82.0	43	22731.0120
30	M16	20.0	27	16	–	25	–	–	27	90	206.0	148	22731.0130
50	M20	34.5	35	20	–	40	–	–	41	165	407.0	482	22731.0150
50	M24	34.5	35	24	–	40	–	–	41	165	698.0	511	22731.0160
with male thread, flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel
13	M 6	7.2	13	8	–	10	–	–	11	10	10.0	12	22731.0312
13	M 8	7.2	13	8	–	10	–	–	11	10	25.0	13	22731.0313
20	M 8	10.5	18	10	–	16	–	–	17	25	25.0	37	22731.0318
20	M10	10.5	18	10	–	16	–	–	17	25	46.0	40	22731.0319
20	M12	10.5	18	12	–	16	–	–	17	25	82.0	43	22731.0320
30	M16	20.0	27	16	–	25	–	–	27	90	206.0	149	22731.0330
50	M20	34.5	35	20	–	40	–	–	41	165	407.0	482	22731.0350
50	M24	34.5	35	24	–	40	–	–	41	165	698.0	511	22731.0360
for locating hole, flat-faced ball, bearing surface plain – picture 3, heat-treated steel
12 n6	M 3	7.2	17	–	3.2	10	12	12	–	10¹⁾	1.3	13	22731.0412
18 n6	M 4	10.5	23	–	4.0	16	18	14	–	25¹⁾	2.9	40	22731.0418
28 n6	M 5	20.0	34	–	6.0	25	28	22	–	90¹⁾	6.0	151	22731.0428
for locating hole, flat-faced ball, bearing surface plain – picture 3, stainless steel
12 n6	M 3	7.2	17	–	3.2	10	12	12	–	10¹⁾	1.3	13	22731.0452
18 n6	M 4	10.5	23	–	4.0	16	18	14	–	25¹⁾	2.9	40	22731.0458
28 n6	M 5	20.0	34	–	6.0	25	28	22	–	90¹⁾	6.0	150	22731.0468
for locating hole, flat-faced ball, bearing surface ribbed – picture 4, heat-treated steel
12 n6	M 3	7.2	17	–	3.2	10	12	12	–	10¹⁾	1.3	13	22731.0712
18 n6	M 4	10.5	23	–	4.0	16	18	14	–	25¹⁾	2.9	40	22731.0718
28 n6	M 5	20.0	34	–	6.0	25	28	22	–	90¹⁾	6.0	150	22731.0728

¹⁾ Applies only when the minimum bore depth is kept to.

Application Example

Self-Aligning Pads • with hard metal ball, ribbed and self-resetting, EH 22731.

Product Description

Especially designed for cast parts (hard casting crust). To be used as support, thrust pad and for build into clamping elements.
By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece.

Material

Spring element
• Thermoplastic PUR
Ball
• Hard metal, ribbed, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated

Drawing

Order Information

Dimensions						WS	Load capacity for static load max.	Tightening torque max.	Weight	Art. No.
d₁	d₂	d₃	l₁	l₂	ball diameter			Tightening torque max.
			±0.2	-0.5
[mm]						[mm]	[kN]	[Nm]	[g]
with male thread, flat-faced ball, bearing surface ribbed, heat-treated steel
13	M 6	8.3	13	8	10	11	10	10	14	22731.0362
13	M 8	8.3	13	8	10	11	10	25	15	22731.0363
20	M 8	13.2	18	10	16	17	25	25	48	22731.0378
20	M10	13.2	18	10	16	17	25	46	50	22731.0379
20	M12	13.2	18	12	16	17	25	82	53	22731.0380
30	M16	20.0	27	16	25	27	90	206	186	22731.0381
50	M20	34.5	35	20	40	41	165	407	639	22731.0382
50	M24	34.5	35	24	40	41	165	698	673	22731.0383
with male thread, flat-faced ball, bearing surface ribbed, stainless steel
13	M 6	8.3	13	8	10	11	10	10	14	22731.0390
13	M 8	8.3	13	8	10	11	10	25	16	22731.0392
20	M 8	13.2	18	10	16	17	25	25	48	22731.0394
20	M10	13.2	18	10	16	17	25	46	49	22731.0396
20	M12	13.2	18	12	16	17	25	82	53	22731.0398
30	M16	20.0	27	16	25	27	90	206	190	22731.0399
50	M20	34.5	35	20	40	41	165	407	639	22731.0400
50	M24	34.5	35	24	40	41	165	698	673	22731.0401

Application Example

Liste des numéros de pièces

Nombre d’articles

Référence pièce

22731.0392

En rapport

Material (ball)

(mm)

Dimension d1

Dimension d2

Dimension d3

(mm)

Dimension l1

(mm)

Dimension l2

(mm)

Dimension l3

(mm)

Depth

(mm)

Location hole

(mm)

Load capacity for static load max.

(kN)

Body

Tightening torque max.

(Nm)

Surface

System

RoHS?

Quantité minimale de commande

Feuille de donnees

1 pièces

Prix unitaire (hors TVA)(Prix unitaire TTC)	Jour d'expédition standard

66.24 €39.08 €
( 46.51 € )

Article en stock : 1 jour ouvrableDisponible pour une expédition le jour même

Plus d'informations

Informations de base

Informations de base

Les cimblots oscillants servent de butées, d'appuis et de patins de serrage avec les éléments de bridage.

Catalogue

Page d'accueil des produits

Catalogue (2 pages)

La référence pièce a été confirmé