Cimblots oscillants (Numéros de référence - Téléchargement CAO)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Self-Aligning Pads, EH 22730.
Product Description
 | Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. |
Material
• Ball-bearing steel, hardened, bright
• Stainless steel 1.3541, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Notes
Loading capacity valid for steel and stainless steel designs.
Drawing
Order Information
| Dimensions | Location hole | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||||
| d1 | d2 | d3 | l1 | l2 | l3 | ball diameter | Ø | Depth | |||||
| -0.5 | max. | H7 | min. | ||||||||||
| [mm] | [mm] | [mm] | [kN] | [Nm] | [g] | ||||||||
| with male thread, flat-faced ball, bearing surface plain – picture 1, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12.0 | 22730.0012 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13.0 | 22730.0013 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 39.0 | 22730.0018 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40.0 | 22730.0019 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43.0 | 22730.0020 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 151.0 | 22730.0030 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 489.0 | 22730.0050 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 518.0 | 22730.0060 |
| with male thread, flat-faced ball, bearing surface plain – picture 1, stainless steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12.0 | 22730.0112 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13.0 | 22730.0113 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38.0 | 22730.0118 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40.0 | 22730.0119 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 44.0 | 22730.0120 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 150.0 | 22730.0130 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 482.0 | 22730.0150 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 512.0 | 22730.0160 |
| with male thread, flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12.0 | 22730.0312 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13.0 | 22730.0313 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38.0 | 22730.0318 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40.0 | 22730.0319 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43.0 | 22730.0320 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 149.0 | 22730.0330 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 484.0 | 22730.0350 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 513.0 | 22730.0360 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 11 | – | 3.2 | 10 | 12 | 6 | – | 101) | 1.3 | 8.0 | 22730.0412 |
| 18 n6 | M 4 | 10.5 | 17 | – | 4.0 | 16 | 18 | 8 | – | 251) | 2.9 | 29.0 | 22730.0418 |
| 28 n6 | M 5 | 20.0 | 25 | – | 5.5 | 25 | 28 | 13 | – | 901) | 6.0 | 109.0 | 22730.0428 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, stainless steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 11 | – | 3.2 | 10 | 12 | 6 | – | 101) | 1.3 | 7.9 | 22730.0452 |
| 18 n6 | M 4 | 10.5 | 17 | – | 4.0 | 16 | 18 | 8 | – | 251) | 2.9 | 29.0 | 22730.0458 |
| 28 n6 | M 5 | 20.0 | 25 | – | 5.5 | 25 | 28 | 13 | – | 901) | 6.0 | 108.0 | 22730.0468 |
| for locating hole, flat-faced ball, bearing surface ribbed – picture 4, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 11 | – | 3.2 | 10 | 12 | 6 | – | 101) | 1.3 | 7.9 | 22730.0712 |
| 18 n6 | M 4 | 10.5 | 17 | – | 4.0 | 16 | 18 | 8 | – | 251) | 2.9 | 29.0 | 22730.0718 |
| 28 n6 | M 5 | 20.0 | 25 | – | 5.5 | 25 | 28 | 13 | – | 901) | 6.0 | 108.0 | 22730.0728 |
Application Example
Self-Aligning Pads • with hard metal ball, ribbed, EH 22730.
Product Description
 | Especially designed for cast parts (hard casting crust). To be used as support, thrust pad and for build into clamping elements. |
Material
• Hard metal, ribbed, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Notes
Loading capacity valid for steel and stainless steel designs.
Drawing
Order Information
| Dimensions | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||
| d1 | d2 | d3 | l1 | l2 | ball diameter | |||||
| ±0.2 | -0.5 | |||||||||
| [mm] | [mm] | [kN] | [Nm] | [g] | ||||||
| with male thread, flat-faced ball, bearing surface ribbed, heat-treated steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22730.0362 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 15 | 22730.0363 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 49 | 22730.0378 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 50 | 22730.0379 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 54 | 22730.0380 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 186 | 22730.0381 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 633 | 22730.0382 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 664 | 22730.0383 |
| with male thread, flat-faced ball, bearing surface ribbed, stainless steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22730.0390 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 15 | 22730.0392 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 48 | 22730.0394 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 50 | 22730.0396 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 54 | 22730.0398 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 186 | 22730.0399 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 632 | 22730.0400 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 660 | 22730.0401 |
Application Example
Self-Aligning Pads • self-resetting, EH 22731.
Product Description
 | Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece. |
Material
• Thermoplastic PUR
Ball
• Ball-bearing steel, hardened, bright
• Stainless steel 1.3541, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Notes
Loading capacity valid for steel and stainless steel designs.
Drawing
Order Information
| Dimensions | Location hole | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||||
| d1 | d2 | d3 | l1 | l2 | l3 | ball diameter | Ø | Depth | |||||
| -0.5 | max. | H7 | min. | ||||||||||
| [mm] | [mm] | [mm] | [kN] | [Nm] | [g] | ||||||||
| with male thread, flat-faced ball, bearing surface plain – picture 1, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12 | 22731.0012 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13 | 22731.0013 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38 | 22731.0018 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40 | 22731.0019 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43 | 22731.0020 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 149 | 22731.0030 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 486 | 22731.0050 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 516 | 22731.0060 |
| with male thread, flat-faced ball, bearing surface plain – picture 1, stainless steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12 | 22731.0112 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13 | 22731.0113 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38 | 22731.0118 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 39 | 22731.0119 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43 | 22731.0120 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 148 | 22731.0130 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 482 | 22731.0150 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 511 | 22731.0160 |
| with male thread, flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12 | 22731.0312 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13 | 22731.0313 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 37 | 22731.0318 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40 | 22731.0319 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43 | 22731.0320 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 149 | 22731.0330 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 482 | 22731.0350 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 511 | 22731.0360 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 17 | – | 3.2 | 10 | 12 | 12 | – | 101) | 1.3 | 13 | 22731.0412 |
| 18 n6 | M 4 | 10.5 | 23 | – | 4.0 | 16 | 18 | 14 | – | 251) | 2.9 | 40 | 22731.0418 |
| 28 n6 | M 5 | 20.0 | 34 | – | 6.0 | 25 | 28 | 22 | – | 901) | 6.0 | 151 | 22731.0428 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, stainless steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 17 | – | 3.2 | 10 | 12 | 12 | – | 101) | 1.3 | 13 | 22731.0452 |
| 18 n6 | M 4 | 10.5 | 23 | – | 4.0 | 16 | 18 | 14 | – | 251) | 2.9 | 40 | 22731.0458 |
| 28 n6 | M 5 | 20.0 | 34 | – | 6.0 | 25 | 28 | 22 | – | 901) | 6.0 | 150 | 22731.0468 |
| for locating hole, flat-faced ball, bearing surface ribbed – picture 4, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 17 | – | 3.2 | 10 | 12 | 12 | – | 101) | 1.3 | 13 | 22731.0712 |
| 18 n6 | M 4 | 10.5 | 23 | – | 4.0 | 16 | 18 | 14 | – | 251) | 2.9 | 40 | 22731.0718 |
| 28 n6 | M 5 | 20.0 | 34 | – | 6.0 | 25 | 28 | 22 | – | 901) | 6.0 | 150 | 22731.0728 |
Application Example
Self-Aligning Pads • with hard metal ball, ribbed and self-resetting, EH 22731.
Product Description
 | Especially designed for cast parts (hard casting crust). To be used as support, thrust pad and for build into clamping elements. By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece. |
Material
• Thermoplastic PUR
Ball
• Hard metal, ribbed, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Drawing
Order Information
| Dimensions | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||
| d1 | d2 | d3 | l1 | l2 | ball diameter | |||||
| ±0.2 | -0.5 | |||||||||
| [mm] | [mm] | [kN] | [Nm] | [g] | ||||||
| with male thread, flat-faced ball, bearing surface ribbed, heat-treated steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22731.0362 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 15 | 22731.0363 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 48 | 22731.0378 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 50 | 22731.0379 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 53 | 22731.0380 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 186 | 22731.0381 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 639 | 22731.0382 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 673 | 22731.0383 |
| with male thread, flat-faced ball, bearing surface ribbed, stainless steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22731.0390 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 16 | 22731.0392 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 48 | 22731.0394 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 49 | 22731.0396 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 53 | 22731.0398 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 190 | 22731.0399 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 639 | 22731.0400 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 673 | 22731.0401 |
Application Example
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | RoHS | Material (ball) (mm) | Dimension d1 | Dimension d2 | Dimension d3 (mm) | Dimension l1 (mm) | Dimension l2 (mm) | Dimension l3 (mm) | WS (mm) | Depth (mm) | Location hole (mm) | Load capacity for static load max. (kN) | Body | Tightening torque max. (Nm) | Surface | System | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
66.94 € | 1 | 3 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
211.81 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
211.81 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
54.97 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
54.97 € | 1 | 3 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
73.82 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
73.82 € | 1 | 3 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
73.82 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
114.14 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
229.10 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
229.10 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
63.92 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
63.92 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
85.83 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
85.83 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
85.83 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
126.80 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
254.38 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
254.38 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
28.53 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
39.56 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
50.51 € | 1 | 2 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
35.95 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
49.48 € | 1 | 4 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
66.63 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
37.76 € | 1 | 3 jours | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
51.26 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
64.26 € | 1 |
Jour même
Stock | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Informations de base
| Conflict Minerals free | yes | REACH compliant | yes |
|---|
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
Material (ball)(mm)
- Stainless steel 1.3541, nickel-plated
- Ball-bearing steel, hardened, bright
-
Dimension d1
-
Dimension d2
-
Dimension d3(mm)
-
Dimension l1(mm)
-
Dimension l2(mm)
-
Dimension l3(mm)
-
WS(mm)
-
Depth(mm)
- 6
- 8
- 13
-
Location hole(mm)
- 12
- 18
- 28
-
Load capacity for static load max.(kN)
-
Body
- Stainless steel 1.4057, heat-treated
- Heat-treated steel, tempered, phosphated
-
Tightening torque max.(Nm)
-
Surface
- plain
- ribbed
-
System
- V40
- V70
-
Type
- 22730
-
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 2 jours ou moins
- 3 jours ou moins
- 4 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.