ASD*FM, Double limiteur de débit pour un fonctionnement à faible vitesse
- En promotion
- Remise sur volume
[Features]
· Two flow-control valves and check valves integrated.
· Prevention of stick-slip phenomenon and speed control of a single-acting cylinder.
· Allows stable speed control, even with load fluctuation.
· Low-speed control for small bore cylinders.
(i)Remarque
- For specifications and details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Dual Speed Controller For Low-Speed Operation, ASD-FM Series Specifications
Model
| Model | Applicable tubing | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Metric size | Inch Size | |||||||||
| 4 | 6 | 8 | 10 | 1/8 " | 5/32 " | 3/16 " | 1/4 " | 5/16 " | 3/8 " | |
| ASD230FM-M5 | ● | ● | - | - | - | - | - | - | - | - |
| ASD330FM-01 | - | ● | ● | - | - | - | - | - | - | - |
| ASD430FM-02 | - | ● | ● | ● | - | - | - | - | - | - |
| ASD230FM-U10/32 | - | - | - | - | ● | ● | ● | ● | - | - |
| ASD330FM-N01 | - | - | - | - | - | - | ● | ● | ● | - |
| ASD430FM-N02 | - | - | - | - | - | - | - | ● | ● | ● |
Specifications
| Usable fluids | Air |
|---|---|
| Proof pressure | 1.5 MPa |
| Max. operating pressure | 1 MPa |
| Min. operating pressure | 0.1 MPa |
| Ambient and fluid temperature | -5 to 60℃ (no freezing) |
| Note 1)Applicable tubing material | Nylon, soft nylon, polyurethane |
Note 1) Use caution at the max. operating pressure when using soft nylon or polyurethane tubing.
Note 2) All brass components are electroless nickel plated. The lock nut of the meter-out side is zinc chromate plated (the round lock nut is electroless nickel plated). The meter-in side lock nut and M5 type handle are black zinc chromate plated.
Flow rate and sonic conductance
| Model | ASD230FM | ASD330FM | ASD430FM | ||
|---|---|---|---|---|---|
| Tube outer diameter | Metric size | ø4, ø6 | ø6, ø8 | ø6 | ø8, ø10 |
| Inch Size | ø1/8 ", ø5/32 " ø3/16 ", ø1/4 " | ø3/16 ", ø1/4 " | - | ø1/4 ",ø5/16 " ø3/8 " | |
| Controlled flow | Flow rate L/min (ANR) | 7 | 12 | 38 | |
| Sonic conductance dm3/(s·bar) | 0.02 | 0.04 | 0.12 | ||
| Critical pressure ratio | 0.25 | 0.2 | 0.2 | ||
| Free flow | Flow rate L/min (ANR) | 7 | 12 | 38 | |
| Sonic conductance dm3/(s·bar) | 0.02 | 0.04 | 0.12 | ||
| Critical pressure ratio | 0.3 | 0.15 | 0.15 | ||
Note 1) Flow rate at a pressure of 0.5 MPa and a temperature of 20°C.
Structural Drawing
ASD230FM structural drawing
| No. | Part Name | Material | Note |
|---|---|---|---|
| 1 | Body A | PBT | - |
| 2 | Elbow body | PBT | - |
| 3 | Handle | PBTNote 1) | Black |
| 4 | Body B | Brass | Electroless nickel plating |
| 5 | Body B | Brass | Electroless nickel plating |
| 6 | Needle | Brass | Electroless nickel plating |
| 7 | Seat ring | Brass | Electroless nickel plating |
| 8 | Needle guide | Brass | Electroless nickel plating |
| 9 | Lock nut | SteelNote 2) | Zinc chromate platedNote 3) |
| 10 | Lock nut | SteelNote 2) | Black zinc chromate plated |
ASD330FM/430FM structural drawing
| No. | Part Name | Material | Note |
|---|---|---|---|
| 11 | U-seal | HNBR | - |
| 12 | U-seal | HNBR | - |
| 13 | Cassette | - | - |
| 14 | Seal | NBR | - |
| 15 | O-ring | NBR | - |
| 16 | O-ring | NBR | - |
| 17 | O-ring | NBR | - |
| 18 | Spacer | - | - |
| 19 | Gasket | NBR / stainless steel | M5 type only |
Note 1) ASD230FM type is brass (black zinc chromate plated).
Note 2) The material of the lock nut option J (round type) is brass. For ASD330FM and ASD430FM only, it is made of steel.
Note 3) The surface treatment of the lock nut option J (round type) is electroless nickel plated.
External dimensions drawing: Metric size
ASD230FM dimensional drawing. Units: mm
ASD330FM/430FM dimensional drawing. Units: mm
| Model | d | T | H | D1 | D2 | D3 | L1 | L2 | L3 | L4 | Note 1) L5 | Note 2) A1 | Note 2) A2 | M1 | Weight g | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MAX. | MIN. | MAX. | MIN. | MAX. | MIN. | |||||||||||||
| ASD230FM-M5-04 | 4 | M5 ×; 0.8 | 8 | 9.3 | 9.6 | 10 | 11.7 | 29.4 | 17.5 | 34.6 | 29.6 | 33.8 | 28.8 | 30.1 | 25.1 | 7.8 | 12.9 | 12 |
| ASD230FM-M5-06 | 6 | 11.6 | 32.5 | 20.6 | 13.7 | 13 | ||||||||||||
| ASD330FM-01-06S | 6 | R1/8 | 12 | 11.6 | 14.2 | 11.8 | 14 | 38.5 | 22.9 | 39.6 | 34.6 | 35.2 | 30.2 | 32.1 | 27.1 | 10.6 | 13.7 | 29 |
| ASD330FM-01-08S | 8 | 15.2 | 15.8 | 44.8 | 28.2 | 38.9 | 33.9 | 18.5 | 31 | |||||||||
| ASD430FM-02-06S | 6 | R1/4 | 17 | 12.8 | 18.5 | 15 | 18 | 43.5 | 25.2 | 41.8 | 36.8 | 39.9 | 34.9 | 34.4 | 29.4 | 11 | 17 | 53 |
| ASD430FM-02-08S | 8 | 15.2 | 46.5 | 28.2 | 18.5 | 55 | ||||||||||||
| ASD430FM-02-10S | 10 | 18.5 | 19.7 | 49.3 | 31 | 21 | 58 | |||||||||||
Unit: mm
Note 1) Reference dimensions.
Note 2) Reference dimensions of M5 ×; 0.8, R threads after installation.
External dimensions drawing: Inch size
ASD230FM dimensional drawing Units: mm (except where indicated with ")
ASD330FM/430FM dimensional drawing. Units: mm (except where indicated with ")
| Model | d | T | H | D1 | D2 | D3 | L1 | L2 | L3 | L4 | Note 1) L5 | Note 2) A1 | Note 2) A2 | M1 | Weight (g) | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MAX. | MIN. | MAX. | MIN. | MAX. | MIN. | |||||||||||||
| ASD230FM-U10/32-01 | 1/8 " | 10-32 UNF | 8 | 8.4 | 9.6 | 10 | 11.7 | 29.4 | 17.5 | 34.6 | 29.6 | 33.8 | 28.8 | 30.1 | 25.1 | 7.8 | 12.9 | 12 |
| ASD230FM-U10/32-03 | 5/32 " | 9.3 | 13 | |||||||||||||||
| ASD230FM-U10/32-05 | 3/16 " | 11.4 | 35.2 | 23.3 | 16.5 | 14 | ||||||||||||
| ASD330FM-U10/32-07 | 1/4 " | 12 | 32.6 | 20.7 | 13.5 | 15 | ||||||||||||
| ASD330FM-N01-05S | 3/16 " | NPT1/8 | 12.7 | 11.4 | 14.2 | 11.8 | 14 | 39.5 | 23.9 | 39.6 | 34.6 | 35.2 | 30.2 | 32 | 27 | 10.6 | 16.5 | 30 |
| ASD330FM-N01-07S | 1/4 " | 13.2 | 15.8 | 42.2 | 25.6 | 38.9 | 33.9 | 17 | 31 | |||||||||
| ASD330FM-N01-09S | 5/16 " | 15.2 | 44.8 | 28.2 | 18.5 | |||||||||||||
| ASD430FM-N02-07S | 1/4 " | NPT1/4 | 17.5 | 13.2 | 18.5 | 15 | 18 | 43.9 | 25.6 | 41.7 | 36.7 | 39.9 | 34.9 | 34.6 | 29.6 | 11 | 17 | 55 |
| ASD430FM-N02-09S | 5/16 " | 15.2 | 46.5 | 28.2 | 18.5 | |||||||||||||
| ASD430FM-N02-11S | 3/8 " | 18.5 | 19.7 | 49.3 | 32.6 | 21 | 62 | |||||||||||
Units: mm (except where indicated with ")
Note 1) Reference dimensions.
Note 2) Reference dimensions of 10-32UNF and NPT threads after installation.
*See the manufacturer's catalog for information other than the above.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Environnement de fonctionnement, applications | Option de contre-écrou | Connection Dia. | Types of Screw | Applicable Tube O.D. mm (mm) | Applicable Tube O.D. inch size (inch) | Body Size | Sealing Method | Fabrication conforme aux spécifications de la commande | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
29.07 € | 1 | 6 jours | Circonstance propre | Contre-écrou heaxgonal | - | - | - | - | M5 standard | Pas de joint | - | ||
24.94 € | 1 | 26 jours | Circonstance propre | Contre-écrou heaxgonal | - | - | - | - | - | Avec joint | - | ||
23.10 € | 1 | 26 jours | Circonstance propre | Contre-écrou heaxgonal | - | - | - | - | - | Avec joint | - | ||
21.85 € 14.20 € | 1 |
Jour même
Stock | Standard | Contre-écrou heaxgonal | 5 × 0.8 | M | 4 | - | M5 standard | Pas de joint | Aucun | ||
25.96 € | 1 | Disponible | 6 jours | Standard | Contre-écrou rond | 5 × 0.8 | M | 4 | - | M5 Standard | Pas de joint | Aucun | |
21.85 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 5 × 0.8 | M | 6 | - | M5 Standard | Pas de joint | Aucun | ||
22.21 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 10-32 | UNF | - | 1/8 | M5 Standard | Pas de joint | Aucun | ||
21.85 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 10-32 | UNF | - | 5/32 | M5 Standard | Pas de joint | Aucun | ||
21.85 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 10-32 | UNF | - | 3/16 | M5 Standard | Pas de joint | Aucun | ||
21.85 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | - | - | - | - | M5 standard | Pas de joint | - | ||
28.53 € 18.54 € | 1 |
Jour même
Stock | Standard | Contre-écrou heaxgonal | 1/8 | R | 6 | - | 1/8 standard | Avec joint | Aucun | ||
28.52 € | 1 | 26 jours | Standard | Contre-écrou rond | 1/8 | R | 6 | - | 1/8 Standard | Avec joint | Aucun | ||
28.53 € 18.54 € | 1 |
Jour même
Stock | Standard | Contre-écrou heaxgonal | 1/8 | R | 8 | - | 1/8 Standard | Avec joint | Aucun | ||
27.06 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/8 | NPT | - | 3/16 | 1/8 Standard | Avec joint | Aucun | ||
28.53 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/8 | NPT | - | 1/4 | 1/8 Standard | Avec joint | Aucun | ||
24.77 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/8 | NPT | - | 5/16 | 1/8 Standard | Avec joint | Aucun | ||
29.87 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/4 | R | 6 | - | 1/4 Standard | Avec joint | Aucun | ||
29.87 € | 1 | 26 jours | Standard | Contre-écrou rond | 1/4 | R | 6 | - | 1/4 Standard | Avec joint | Aucun | ||
33.27 € | 1 | 22 jours | Standard | Contre-écrou heaxgonal | 1/4 | R | 8 | - | 1/4 standard | Avec joint | Aucun | ||
33.27 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/4 | R | 10 | - | 1/4 Standard | Avec joint | Aucun | ||
29.87 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/4 | NPT | - | 1/4 | 1/4 Standard | Avec joint | Aucun | ||
29.87 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/4 | NPT | - | 5/16 | 1/4 Standard | Avec joint | Aucun | ||
33.27 € | 1 | 26 jours | Standard | Contre-écrou heaxgonal | 1/4 | NPT | 6 | 3/8 | 1/4 Standard | Avec joint | Aucun |
Loading...
Informations de base
| Type | Régulateur de vitesse | Forme du corps principal | Universel | Méthode de contrôle | Régulation en sortie / en entrée |
|---|---|---|---|---|---|
| Type de raccord | Filetage mâle + accouplements à simple pression | Matériau du corps principal | PBT | Matériau du filetage | Acier inoxydable (EN 1.4305 équiv.) |
| Type à bouton | Résine |
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
Environnement de fonctionnement, applications
- Standard
- Circonstance propre
-
Option de contre-écrou
- Contre-écrou rond
- Contre-écrou heaxgonal
-
Connection Dia.
- 1/4
- 1/8
- 5 × 0.8
- 10-32
-
Types of Screw
-
Applicable Tube O.D. mm(mm)
- 4
- 6
- 8
- 10
-
Applicable Tube O.D. inch size(inch)
-
Body Size
- 1/4 Standard
- 1/4 standard
- 1/8 Standard
- 1/8 standard
- M5 Standard
- M5 standard
-
Sealing Method
- Avec joint
- Pas de joint
-
Fabrication conforme aux spécifications de la commande
- Aucun
-
Type
- 10-ASD□30FM
- ASD□30FM
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 6 jours ou moins
- 22 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.