- Matériau du corps principal
- Diam. extérieur du tube applicable (mm) D (D1)
- 12
- Type de vis d'assemblage M (M1)
- Vis d'assemblage nominale M (M1)
- Size of Body
- 5
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
LQ1L, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à raccord (LQ1L52-M-1)
Informations sur le produit
Male Elbow LQ1L-M Metric Size) Specifications
Common Specifications
| Item | Model | |||||
|---|---|---|---|---|---|---|
| LQ1□10 | LQ1□20 | LQ1□30 | LQ1□40 | LQ1□50 | LQ1□60 | |
| Material | New PFA Note: | |||||
| Maximum operating pressure (at 20°C) | 1.0 MPa | |||||
| Withstand pressure | Refer to the withstand pressure and heat resistance performance curves. | |||||
| Operating temperature | 0 to 200℃ | |||||
Note: For made-to-order products, the main body of the fitting is made of PTFE.
Withstand pressure and heat resistance performance
Withstand pressure and heat resistance performance curves
Series
| Series | Size | Pipe connection port diameter | Tube outer diameter | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Metric Size | |||||||||||||||||
| None | 1/8 " | 1/4 " | 3/8 " | 1/2 " | 3/4 " | 1 " | ø3 | ø4 | ø6 | ø8 | ø10 | ø12 | ø19 | ø25 | |||
| Elbow LQ1L | Male | 1 | - | ○ | - | - | - | - | - | ○ | ○ | - | - | - | - | - | - |
| 2 | - | ○ | ○ | - | - | - | - | ● | ● | ○ | - | - | - | - | - | ||
| 3 | - | ○ | ○ | ○ | - | - | - | ● | ● | ● | ● | ○ | - | - | - | ||
| 4 | - | - | ○ | ○ | ○ | - | - | ● | ● | ● | ● | ● | ○ | - | - | ||
| 5 | - | - | - | ○ | ○ | ○ | - | - | - | ● | ● | ○ | ● | ○ | - | ||
| 6 | - | - | - | ○ | - | ○ | ○ | - | - | - | - | - | ● | ● | ○ | ||
Note: ○ Standard size ● With reducer
Outline/dimensions
Male Elbow Outline Drawing
Male Elbow dimensional drawing
(E): Shows the approximate dimension of the inserted tubing from the end of the nut
W: Width across flats
Male Elbow dimensional drawing for size 1
Male Elbow dimensional drawing for sizes 2 to 5
Male Elbow dimensional drawing for size 6
| Model | Applicable tube outer diameter | Connection thread R/NPT | A | E | H | L1 | L2 | M |
|---|---|---|---|---|---|---|---|---|
| LQ1L11-M□ | ø4 | 1/8 " | 11.5 | 10 | - | 18 | 15 | 11.5 |
| LQ1L12-M□ | ø3 | |||||||
| LQ1L21-M□ | ø6 | 1/8 " | 14.5 | 15 | 14 | 27 | 20.5 | 16.5 |
| LQ1L22-M□ | ø4 | |||||||
| LQ1L2C-M□ | ø3 | |||||||
| LQ1L23-M□ | ø6 | 1/4 " | ||||||
| LQ1L24-M□ | ø4 | |||||||
| LQ1L2F-M□ | ø3 | |||||||
| LQ1L31-M□ | ø10 | 1/4 " | 20 | 20 | 17 | 35 | 26.5 | 23 |
| LQ1L32-M□ | ø8 | |||||||
| LQ1L33-M□ | ø6 | |||||||
| LQ1L34-M□ | ø10 | 3/8 " | ||||||
| LQ1L35-M□ | ø8 | |||||||
| LQ1L36-M□ | ø6 | |||||||
| LQ1L37-M□ | ø4 | 21.1 | 15 | 14 | 31.6 | 27.1 | 16.5 | |
| LQ1L3E-M□ | ø3 | |||||||
| LQ1L39-M□ | ø10 | 1/8 " | 20.6 | 20 | 17 | 36.6 | 24.1 | 23 |
| LQ1L310-M□ | ø8 |
Units: mm
*Refer to the manufacturer's catalog for other model numbers.
Notes For Tubing
1. Use the dedicated tool for connecting tubes.
Refer to "High-Purity Fluoropolymer Fittings / Hyper Fitting LQ1, 2 Series Work Procedure Instructions" for notes regarding tube connections and dedicated tools.
Dedicated Tool Outline Drawing
2. Tighten the nut as far as the end surface of the main body. In order to confirm that it has properly reached the end surface of the main body, tighten by a further 1/8th (approx.) of a turn. You will know that you have sufficiently tightened the nut if it will turn no further past this point. Be sure to also refer to the appropriate tightening torques shown below.
| Body size | Torque (N·m) |
|---|---|
| 2 | 0.3 to 0.4 |
| 3 | 0.8 to 1.0 |
| 4 | 1.0 to 1.2 |
| 5 | 2.5 to 3.0 |
| 6 | 5.5 to 6.0 |
Note: For body size 1, tighten by hand.
Plus d'informations
Informations de base
A fluoropolymer male elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.
Attention
- Refer to the catalog for product specifications.
- Product images may be representative images. Refer to the catalog for details.