KQG2L, Raccords instantanés acier inox 316, Raccord coudé mâle (KQG2L04-01S)
- En promotion
Détails du produit:
Référence fabricant: KQG2L04-01S
Marque: SMC
Prix: 19.31 €
Délai de livraison: 4 jours
Données techniques:
D.E. 1 de tuyau applicable: 4 φ
Connection Type: R
Connection screw: 1/8
(i)Remarque
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
KQG2L04-01S
Elbow Union Fitting: KQG2L Outline Drawing And Dimensions
Millimeter size type
- Applicable tube: millimeter size
- Connection thread: M, R, Rc
Elbow Union Fitting: KQG2L Outline Drawing (With M5)
Elbow Union Fitting: KQG2L Outline Drawing (With R)
| Applicable tubing outer diameter (mm) | Connection thread: R, M | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional area (mm2 Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø3.2 | M5 × 0.8 | KQG2L23-M5 | 8 | 8.3 | 13.1 | 14.8 | 16 | 12 | 2.6 | 6.3 |
| 1/8 | KQG2L23-01S | 10 | 13.6 | 14.9 | 15.9 | 3 | 7.6 | |||
| 1/4 | KQG2L23-02S | 14 | 18.7 | 18.1 | 16 | |||||
| ø4 | M5 × 0.8 | KQG2L04-M5 | 8 | 9.1 | 13.7 | 15.2 | 16.8 | 12.6 | 3.5 | 6.9 |
| 1/8 | KQG2L04-01S | 10 | 14.4 | 15.3 | 16.7 | 4.2 | 8.5 | |||
| 1/4 | KQG2L04-02S | 14 | 19.1 | 18.9 | 16.8 | |||||
| ø6 | M5 × 0.8 | KQG2L06-M5 | 8 | 11.4 | 14.7 | 16.3 | 19 | 13.6 | 3.5 | 8.8 |
| 1/8 | KQG2L06-01S | 10 | 15.9 | 16.4 | 11.4 | 10.1 | ||||
| 1/4 | KQG2L06-02S | 14 | 20.2 | 21.2 | 18.4 | |||||
| 3/8 | KQG2L06-03S | 17 | 21.6 | 22.2 | 29.9 | |||||
| ø8 | 1/8 | KQG2L08-01S | 12 | 13.7 | 18.6 | 18.3 | 22 | 16.1 | 21.6 | 14.6 |
| 1/4 | KQG2L08-02S | 14 | 19.1 | 21.5 | 23.6 | 20.3 | ||||
| 3/8 | KQG2L08-03S | 17 | 22.9 | 24.6 | 31.6 | |||||
| ø10 | 1/8 | KQG2L10-01S | 12 | 16.6 | 20 | 19.7 | 24.9 | 17 | 21.6 | 20.2 |
| 1/4 | KQG2L10-02S | 14 | 21 | 22.9 | 26.5 | 35.2 | 23.3 | |||
| 3/8 | KQG2L10-03S | 17 | 24.3 | 27.5 | 33.6 | |||||
| 1/2 | KQG2L10-04S | 22 | 28.5 | 30.4 | 60.1 | |||||
| ø12 | 1/4 | KQG2L12-02S | 14 | 18.7 | 22.6 | 24 | 28.6 | 18.6 | 50.2 | 27.1 |
| 3/8 | KQG2L12-03S | 17 | 23.6 | 25.3 | 29.5 | 33.7 | ||||
| 1/2 | KQG2L12-04S | 22 | 29.5 | 32.4 | 58.7 | |||||
| ø16 | 3/8 | KQG2L16-03S | 19 | 24.6 | 26.3 | 28 | 34.5 | 20.8 | 71 | 46.3 |
| 1/2 | KQG2L16-04S | 22 | 27.3 | 31.8 | 37 | 100 | 61.3 |
*Reference dimensions of R thread after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing. Value of nylon tubing for ø16 only.
Inch size type
- Applicable tube: inch size
- Connection thread: UNF, NPT
Elbow Union Fitting: KQG2L Outline Drawing (With 10-32UNF)
Elbow Union Fitting: KQG2L Outline Drawing (With NPT)
| Applicable tubing outer diameter (inch) | Connection thread: UNF, NPT | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional area (mm2) Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø1/8 " | 10-32UNF | KQG2L01-32 | 8 | 8.3 | 13.1 | 14.8 | 16 | 12 | 2.6 | 6.3 |
| 1/8 | KQG2L01-N01S | 12 | 13.6 | 14.9 | 15.8 | 3 | 9 | |||
| 1/4 | KQG2L01-N02S | 14 | 18.7 | 18.4 | 16.7 | |||||
| ø5/32 " | 10-32UNF | KQG2L03-32 | 8 | 9.1 | 13.7 | 15.2 | 16.8 | 12.6 | 3.5 | 6.9 |
| 1/8 | KQG2L03-N01S | 12 | 14.4 | 15.3 | 16.6 | 4.2 | 9.9 | |||
| 1/4 | KQG2L03-N02S | 14 | 19.1 | 19.2 | 17.6 | |||||
| ø1/4 " | 10-32UNF | KQG2L07-32 | 8 | 11.7 | 14.7 | 16.5 | 19.3 | 13.5 | 3.5 | 8.9 |
| 1/8 | KQG2L07-N01S | 12 | 15.9 | 16.6 | 19.2 | 11.4 | 11.7 | |||
| 1/4 | KQG2L07-N02S | 14 | 20.4 | 21.8 | 19.4 | |||||
| 3/8 | KQG2L07-N03S | 19 | 22.2 | 23.3 | 34.2 | |||||
| ø5/16 " | 1/8 | KQG2L09-N01S | 12 | 13.7 | 18.6 | 18.3 | 21.9 | 16.1 | 21.6 | 15.1 |
| 1/4 | KQG2L09-N02S | 14 | 19.1 | 21.5 | 23.9 | 21.1 | ||||
| 3/8 | KQG2L09-N03S | 19 | 23.3 | 25.4 | 35.7 | |||||
| ø3/8 " | 1/8 | KQG2L11-N01S | 12 | 16 | 20 | 19.4 | 24.2 | 16.6 | 21.6 | 19.7 |
| 1/4 | KQG2L11-N02S | 14 | 21 | 22.6 | 26.2 | 35.2 | 23.2 | |||
| 3/8 | KQG2L11-N03S | 19 | 24.4 | 27.7 | 36.7 | |||||
| 1/2 | KQG2L11-N04S | 22 | 28.2 | 29.8 | 60.2 | |||||
| ø1/2 " | 1/4 | KQG2L13-N02S | 14 | 19.6 | 22.7 | 24.4 | 29.8 | 18.5 | 50.2 | 29.4 |
| 3/8 | KQG2L13-N03S | 19 | 23.7 | 26.1 | 31.2 | 39.2 | ||||
| 1/2 | KQG2L13-N04S | 22 | 29.9 | 33.3 | 61.3 |
*Reference NPT thread dimensions after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing.
SUS316 One-Touch Pipe Fitting KQG2 Series Common Specifications (Reference)
Applicable tubing
- Tube materials: FEP, PFA, nylon, soft nylonNote 1), polyurethane, polyolefin
- Tube outer diameter (millimeter size): ø3.2, ø4, ø6, ø8, ø10, ø12, ø16
- Tube outer diameter (inch size): ø1/8, "ø5/32, "ø1/4, "ø5/16, "ø3/8, "ø1/2 "
Note 1) For soft nylon tube, water cannot be used.
Specifications
| Usable fluids | Air, water, steamNote 2) Note 3) |
|---|---|
| Operating pressure rangeNote 4) | -100 kPa to 1 MPaNote 5) |
| Proof pressure | 3.0 MPa |
| Ambient temperature and operating fluid temperatureNote 6) | -5 to 150°C (no freezing)Note 5) |
| Lubricant | Grease-free finish |
| Seal (thread portion) | With sealant |
Note 2) Confirm applicable tube separately.
Note 3) Using special FKM that is resistant to steam.
Note 4) It is not completely airtight, so please avoid use in leak testers, etc., where a vacuum is maintained.
Note 5) Please confirm operating pressure range and operating temperature range.
Note 6) Please equip an inner sleeve for the following conditions. (ø3.2, ø1/8 "are excluded)
· When using with fluids or in environments that have extreme temperature changes.
· When using at a high temperature.
Temperature conditions for equipping inner sleeve
| Tube used | Temperature |
|---|---|
| FEP tube / TH series | 80°C or more |
| Super PFA tube / TL series | 120°C or more |
Structural Drawing
SUS316 One-Touch Pipe Fitting KQG2 Series Structural Drawing
Components
| Number | Part Name | Material |
|---|---|---|
| 1 | Release button | SUS316 |
| 2 | Guide 1 | SUS316 |
| 3 | Guide 2 | SUS316 |
| 4 | Chuck | SUS316 |
| 5 | Seal | Special FKM (fluorine coated) |
| 6 | Male Connector body | SUS316 |
| 7 | Male Elbow body | SUS316 |
| 8 | O-ring | Special FKM (fluorine coated) |
| 9 | Stud | SUS316 |
Référence pièce
|
|---|
| KQG2L04-01S |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | D.E. 1 de tuyau applicable (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
19.31 € | 1 | 4 jours | 4 | R | 1/8 |
Loading...
Informations de base
| Type | Simple effet / vis | Type à raccord | Sens de montage par vis | Fluide applicable | Eau / Air |
|---|---|---|---|---|---|
| Matériau du corps principal | Acier inoxydable (EN 1.4401 équiv.) | Application | Standard/Mini | Matériau du filetage | Acier inoxydable (EN 1.4401 équiv.) |
| Montage par vis, sens | Coude | Coudes | Raccord union coudé | Number of Connection Tubes(pc.) | 1 |
Vous vous trouvez sur la page de KQG2L, Raccords instantanés acier inox 316, Raccord coudé mâle, le numéro d'article est le suivant: KQG2L04-01S.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article KQG2L04-01S.
Configurer
Propriétés de base
-
Type
- KQG2L
-
D.E. 1 de tuyau applicable(φ)
-
Connection Type
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0,8
- 10-32
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 3 jours ou moins
- 4 jours ou moins
- 7 jours ou moins
- 22 jours ou moins
- 24 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| KQG2L03-32 |
| KQG2L03-N01S |
| KQG2L03-N02S |
| KQG2L04-02S |
| KQG2L04-M5 |
| KQG2L06-01S |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | D.E. 1 de tuyau applicable (φ) | Connection Type | Connection screw |
|---|---|---|---|---|---|---|---|
16.03 € | 1 | 26 jours | - | UNF | 10-32 | ||
18.32 € | 1 | 24 jours | - | NPT | 1/8 | ||
24.98 € | 1 | 26 jours | - | NPT | 1/4 | ||
24.98 € | 1 | 4 jours | 4 | R | 1/4 | ||
18.82 € | 1 | 3 jours | 4 | M | 5×0,8 | ||
22.16 € | 1 | 7 jours | 6 | R | 1/8 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.