KK*P-*N, Coupleurs S, Modèle à écrou

KK*P-*N, Coupleurs S, Modèle à écrou
An S coupler / one-touch joint joint with double the plug/socket pull-out strength of the conventional model.
[Features]
· Constructed without the use of any steel balls, giving it a large effective area and a slim body design that will not restrict the flow path.
· Equipped as standard with a sleeve cover.
· The loss of effective area is minimized because there is no valve spring to block the flow path.
· The check valve end configuration facilitates a rectifying effect.
· Uses surface contact to achieve reliable sealing.
· Allows flows from either the plug side or the socket side.
· Shock resistance has been improved by changing the lock ring to shock-resistant PBT.
· The sleeve lock mechanism helps prevent accidents caused by unexpected separation.

(i)Remarque

  • Refer to the catalog for product specs.
  • The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

S Coupler KK Series Plug, Nut Fitting Type (For Fiber Reinforced Urethane Hose) specifications

Specifications

Operating fluid Air, water
Operating pressure rangeNote: KK2: -100 kPa to 1 MPa
KK3: -90kPa to 1MPa
KK4/6: 0 to 1 MPa
Guaranteed proof pressure 1.5 MPa
Ambient temperature and working fluid temperature Air: -5 to 60°C
Water: 5 to 40°C (no freezing)
Plating, seal With electroless nickel plating (copper-free and fluorine-free application) and male thread sealant

Note: Do not use with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.

Performance

Plug/socket connection method One-touch connection
Check valve Socket: check valve built-in (standard)
Sleeve lock mechanism Manual locking type (standard)

External appearance / dimensions

Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance

Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance

Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing

Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing

Body size Model Applicable hose
Internal diameter / outer diameter
H1
Width across flats
H2
Width across flats
L1L2M Minimum hole diameter Effective area mm2 Weight
g
1/8 KK3P-50N 5/8 14 14 36.1 18.4 13.7 4.5 12.7 21.4
KK3P-60N 6/9 17 17 39.9 16.5 5.4 18.3 38.8
KK3P-65N 6.5/10 5.9 21.9 35.9
1/4 KK4P-50N 5/8 14 43.9 25.2 13.7 4.5 12.7 34.7
KK4P-60N 6/9 17 46.7 16.5 5.4 18.3 48.4
KK4P-65N 6.5/10 5.9 21.9 45.1
KK4P-80N 8/12 19 19 47.6 17.4 7.4 34.4 53.2
KK4P-85N 8.5/12.5 7.8 38.2 55.6
1/2 KK6P-80N 8/12 53.4 31.0 7.4 34.4 60.5
KK6P-85N 8.5/12.5 7.8 38.2 62.8
KK6P-110N 11/16 24 24 57.2 20.1 10.2 65.4 96.5

Unit: mm

One-touch connection

Easy to connect with one hand. Improved workability.

Connection method 1

Connection method 1

Connection method 2

Connection method 2

Référence pièce
KK3P-50N
KK3P-60N
KK3P-65N
KK4P-50N
KK4P-60N
KK4P-65N
KK4P-80N
KK4P-85N
KK6P-80N
KK6P-85N
KK6P-110N
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Size of Body Applicable Hose Inner Diameter / Outer Diameter
(mm)

4.61 €

5 4 jours 1/85/8

4.61 €

5 26 jours 1/86/9

4.61 €

5 4 jours 1/86,5/10

4.61 €

5 4 jours 1/45/8

4.61 €

5 4 jours 1/46/9

4.61 €

5 4 jours 1/46,5/10

5.18 €

5 4 jours 1/48/12

5.18 €

5 4 jours 1/48,5/12,5

6.53 €

5 4 jours 1/28/12

6.53 €

5 26 jours 1/28.5/12.5

9.73 €

5 4 jours 1/211/16

Loading...

  1. 1

Informations de base

Type Standard Type de raccord Nut Tightening Type Mâle/femelle Plug
Matériau du corps principal EN CW614N équiv. Fluide applicable Water / Air Structure de la valve Single Passage Opening Closing Type
Environnement de fonctionnement, applications Standard With or Without Check Valve Non

Assistance technique