Inscription
Configurer
  • Type de raccord
  • Matériau du joint
  • Applicable Hose Inner Diameter / Outer Diameter(mm)
  • Type
  • CAO
  • Jours d'expédition estimés
    • Tout
    • Dans les 26 jours ouvrables
SMC

Fiche de coupleur S, gamme KK130P (KK130P-85N)

Fiche de coupleur S, gamme KK130P KK130P-85N

Référence pièce:

KK130P-85N
Réinitialiser

  • Cet article peut être commandé en unités 5.

Quantité :

Informations sur le produit

S Coupler KK130 Series Plug specifications

Specifications

Operating fluid Air Note:
Operating pressure range 0 to 1.5 MPa
One-touch fitting type: 0 to 1.0 MPa
Guaranteed proof pressure 2.0 MPa
Ambient temperature and working fluid temperature -20 to 80°C (no freezing)
One-touch fitting type: -5 to 60°C (no freezing)
Plating Sleeve: electroless nickel plating
Other external metal parts: zinc chromate
Seal Includes male thread sealant

Note: Cannot be used for water.

Performance

Plug/socket connection method Sleeve-slide detachable type
Check valve Socket: built-in check valve
Flow direction Both directions
Sleeve lock mechanism Manual lock system (with detents), semi-standard

Flow rate characteristics (representative value)

S Coupler　Plug (KK130P): related images

Flow rate characteristics

  • *Note: This flow rate characteristics testing method conforms to JIS B 8390 standards (Pneumatic fluid power – Components using compressible fluids – Determination of flow-rate characteristics.)
  • *Note: The figures are representative values when the same type of plug and socket are connected.
 
Connection type Sonic conductance
C [dm3/(s-bar)] 		Critical pressure ratio
b 		Flow coefficient
Cv 		Effective area
S [mm2]
Type Symbol Connection
Male thread -01MS R1/8 4.2 0.4 1.2 21
-02MS R1/4 7.0 0.4 1.9 35
-03MS R3/8 7.0 0.5 2.1 35
-04MS R1/2 7.0 0.5 2.1 35
Female thread -01F Rc1/8 6.0 0.5 1.8 30
-02F Rc1/4 7.0 0.5 2.1 35
-03F Rc3/8 7.0 0.5 2.1 35
-04F Rc1/2 7.0 0.5 2.1 35
With barb fitting -07B 6 (1/4 ") 2.0 0.4 0.5 10
-09B 8 (1/4 ") 3.0 0.4 0.8 15
-11B 10 (3/8 ") 6.0 0.5 1.8 30
-13B 12 (1/2 ") 7.0 0.5 2.1 35
With nut fitting -50N 5/8 2.0 0.4 0.5 10
-60N 6/9 3.5 0.4 1.0 18
-65N 6.5/10 4.2 0.4 1.2 21
-80N 8/12 7.0 0.4 1.9 35
-85N 8.5/12.5 7.0 0.4 1.9 35
-110N 11/16 7.0 0.5 2.1 35
With one-touch fitting -06H ø6 2.0 0.4 0.5 10
-08H ø8 4.4 0.5 1.3 22
-10H ø10 7.0 0.5 1.8 35
-12H ø12 7.0 0.5 2.1 35

Male Thread Type outline dimensional drawing

S Coupler　Plug (KK130P): related images

Plug - Male Thread Type external appearance

S Coupler　Plug (KK130P): related images

Plug - Male Thread Type dimensional drawing

S Coupler　Plug (KK130P): related images

Plug - Male Thread Type dimensional drawing (with socket connection)

Model T
Connection male thread 		H
Width across flats 		L1L2A *1 Minimum hole diameter Weight g When connected
Overall length L3
KK130P-01MS R1/8 14 34.0 11.1 30.0 6.0 18 51.1
KK130P-02MS R1/4 14 38.0 13.1 32.0 8.0 22 53.9
KK130P-03MS R3/8 19 39.0 13.6 32.5 8.0 37 53.3
KK130P-04MS R1/2 22 43.0 16.1 35.0 8.0 52 55.9
KK130P-N01MS NPT1/8 14 34.0 10.1 29.0 6.0 18 49.4
KK130P-N02MS NPT1/4 14 38.0 11.6 30.5 8.0 22 51.5
KK130P-N03MS NPT3/8 19 39.0 12.6 31.5 8.0 37 51.7
KK130P-N04MS NPT1/2 22 43.0 14.1 33.0 8.0 52 52.3

Units: mm
*1: Reference dimensions after screwing in.

Female Thread Type outline dimensional drawing

S Coupler　Plug (KK130P): related images

Plug - Female Thread Type external appearance

S Coupler　Plug (KK130P): related images

Plug - Female Thread Type dimensional drawing

S Coupler　Plug (KK130P): related images

Plug - Female Thread Type dimensional drawing (with socket connection)

Model T
Connection male thread 		H
Width across flats 		L1L2Minimum hole diameter Weight g When connected
Overall length L3
KK130P-01F Rc1/8 14 30.0 11.1 8.0 18 53.0
KK130P-02F Rc1/4 17 36.0 17.1 8.0 28 62.5
KK130P-03F Rc3/8 21 37.0 18.1 8.0 38 66.5
KK130P-04F Rc1/2 27 42.0 23.1 8.0 73 76.0
KK130P-N01F NPT1/8 14 30.0 11.1 8.0 18 53.0
KK130P-N02F NPT1/4 17 36.0 17.1 8.0 28 62.5
KK130P-N03F NPT3/8 21 37.0 18.1 8.0 38 66.5
KK130P-N04F NPT1/2 27 42.0 23.1 8.0 73 76.0

Unit: mm

Barb Fitting Type (For Rubber Hoses) outline dimensional drawing

S Coupler　Plug (KK130P): related images

Plug - Barb Fitting Type (For Rubber Hoses) external appearance

S Coupler　Plug (KK130P): related images

Barb Fitting Type (For Rubber Hoses) dimensional drawing

S Coupler　Plug (KK130P): related images

Barb Fitting Type (For Rubber Hoses) dimensional drawing (with socket connection)

Model Nominal of hose øD1øD2L1L2Minimum hole diameter Weight g When connected
Overall length L3
KK130P-07B 6 (1/4 ") 7.2 14.0 46.0 27.1 4.5 16 88.0
KK130P-09B 8 (1/4 ") 9.0 15.0 46.0 27.1 5.0 19 87.5
KK130P-11B 9 (3/8 ") 11.3 16.0 46.0 27.1 8.0 19 87.0
KK130P-13B 12 (1/2 ") 15.0 18.0 46.0 27.1 8.0 33 86.0

Unit: mm

  • *The values within () represent the internal diameter of applicable hoses.
  • *Note: Refer to the manufacturer's catalog for specifications other than those above.

Liste des numéros de pièces

Nombre d’articles
  • 1
    • Référence pièce
    KK130P-85N
    En rapport

    Type de raccord

    Matériau du joint

    Plage de températures de fonctionnement

    (°C)

    Pipe Connection Bore Dia.

    Nominal Designation of Hose

    (mm / (Inch))

    Applicable Hose Inner Diameter / Outer Diameter

    (mm)

    Compatible Tube Outer Diameter

    (mm)

    Compatible Tube Outer Diameter

    (Inch)

    		Quantité minimale de commande

    -

    Nut Tightening Type
    00011
    -20～ 80
    -
    -
    8.5/12.5
    -
    -
    5 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    7.73 €
    ( 9.20 € )
    26 jours ouvrables
  • 1

    • Plus d'informations

    Informations de base

    An energy-saving type S coupler one-touch joint achieved through reduced losses in pressure.
    [Features]
    · Plug: Heat treated for reduced denting, deformation and wear.
    · C factor: increased by 34% (R1/4 thread type, comparison with conventional product*.)
    · Plug insertion force: reduced by 22% (20 N) (at 0.5 MPa, comparison with the conventional product*.)
    · Lightweight: reduced by 14% (12 g) (comparison with the conventional product*.)
    · * Conventional product: KK13 Series.
    · One-touch fitting type has been standardized.
    · Includes a locking mechanism (semi-standard) for preventing detachment due to unexpected impact, etc.
    · The detents on the sleeve help maintain the lock position and release position.

    Attention

    • Le produit montré dans l'image peut être une image représentative. Reportez-vous au catalogue pour connaître les formes et les types de produits.