Prise de coupleur S, gamme KK130S
- En promotion
[Features]
· Air consumption amount can be reduced and costs kept down by reducing the compressor's power consumption.
· 12‑g lighter than the conventional product.
· The plug insertion force has been reduced by 20 N in comparison to the conventional product (at 0.5 MPa.)
· The C factor has been increased by 34% in comparison to the conventional product (R1/4 thread type.)
(i)Remarque
- Le produit montré dans l'image peut être une image représentative. Reportez-vous au catalogue pour connaître les formes et les types de produits.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
S Coupler KK130 Socket specifications
Common specifications
| Operating fluid | Air Note: |
|---|---|
| Operating pressure range | 0 to 1.5 MPa |
| One-touch fitting type: 0 to 1.0 MPa | |
| Guaranteed proof pressure | 2.0 MPa |
| Ambient temperature and working fluid temperature | -20 to 80°C (no freezing) |
| One-touch fitting type: -5 to 60°C (no freezing) | |
| Plating | Sleeve: electroless nickel plating Other external metal parts: zinc chromate |
| Seal | Includes male thread sealant |
Note: Cannot be used for water.
Common performance
| Plug/socket connection method | Sleeve-slide detachable type |
|---|---|
| Check valve | Socket: built-in check valve |
| Flow direction | Both directions |
| Sleeve lock mechanism | Manual lock system (with detents), semi-standard |
Male thread type
Male Thread Type external appearance
Male Thread Type dimensional drawing (Units: mm)
| Model | T Connection male thread | H Width across flats | L1 | A *1 | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|---|
| KK130S(L)-01MS | R1/8 | 22 | 44.0 | 40.0 | 6.0 | 73 |
| KK130S(L)-02MS | R1/4 | 22 | 46.8 | 40.8 | 8.5 | 74 |
| KK130S(L)-03MS | R3/8 | 22 | 46.2 | 39.7 | 8.5 | 82 |
| KK130S(L)-04MS | R1/2 | 22 | 47.8 | 39.8 | 14.0 | 83 |
| KK130S(L)-N01MS | NPT1/8 | 22 | 44.3 | 39.3 | 6.0 | 73 |
| KK130S(L)-N02MS | NPT1/4 | 22 | 47.4 | 39.9 | 8.5 | 74 |
| KK130S(L)-N03MS | NPT3/8 | 22 | 46.6 | 39.1 | 8.5 | 82 |
| KK130S(L)-N04MS | NPT1/2 | 22 | 48.2 | 38.2 | 14.0 | 83 |
Unit: mm
- *1: Reference dimensions after screwing in
Female thread type
Female Thread Type external appearance
Female Thread Type dimensional drawing (Units: mm)
| Model | T Connection male thread | H Width across flats | L1 | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|
| KK130S(L)-01F | Rc1/8 | 22 | 41.9 | 8.0 | 90 |
| KK130S(L)-02F | Rc1/4 | 22 | 45.4 | 11.0 | 92 |
| KK130S(L)-03F | Rc3/8 | 22 | 48.4 | 11.0 | 91 |
| KK130S(L)-04F | Rc1/2 | 27 | 52.9 | 14.0 | 117 |
| KK130S(L)-N01F | NPT1/8 | 22 | 41.9 | 8.0 | 90 |
| KK130S(L)-N02F | NPT1/4 | 22 | 45.4 | 11.0 | 92 |
| KK130S(L)-N03F | NPT3/8 | 22 | 48.4 | 11.0 | 91 |
| KK130S(L)-N04F | NPT1/2 | 27 | 52.9 | 14.0 | 117 |
Unit: mm
Barb fitting type (for rubber hoses)
Barb Fitting Type (For Rubber Hoses) external appearance
Barb Fitting Type (For Rubber Hoses) dimensional drawing (Units: mm)
| Model | Nominal of hose | øD1 | L1 | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|
| KK130S(L)-07B | 6 (1/4 ") | 7.2 | 60.9 | 4.5 | 70 |
| KK130S(L)-09B | 8 (1/4 ") | 9.0 | 60.4 | 5.0 | 72 |
| KK130S(L)-11B | 9 (3/8 ") | 11.3 | 59.9 | 7.7 | 73 |
| KK130S(L)-13B | 12 (1/2 ") | 15.0 | 58.9 | 9.0 | 81 |
Unit: mm
*The values within () represent the internal diameter of applicable hoses
Nut Fitting Type (For Fiber Reinforced Urethane Hose)
Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance
Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing (Units: mm)
| Model | Applicable hose Internal diameter / outer diameter | H1 | H2 | L1 | M | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|---|---|
| KK130S(L)-50N | 5/8 | 22 | 14 | 49.6 | 13.7 | 4.5 | 85 |
| KK130S(L)-60N | 6/9 | 22 | 17 | 51.6 | 16.4 | 5.5 | 95 |
| KK130S(L)-65N | 6.5/10 | 22 | 17 | 51.6 | 16.5 | 6.0 | 92 |
| KK130S(L)-80N | 8/12 | 22 | 19 | 52.6 | 17.4 | 8.0 | 97 |
| KK130S(L)-85N | 8.5/12.5 | 22 | 19 | 52.6 | 17.4 | 8.0 | 101 |
| KK130S(L)-110N | 11/16 | 24 | 24 | 52.6 | 20.1 | 10.0 | 119 |
Unit: mm
One-touch fitting type
One-Touch Fitting Type external appearance
One-Touch Fitting Type dimensional drawing (Units: mm)
| Model | Applicable tube outer diameter mm | D | L1 | M | Minimum hole diameter | Weight g |
|---|---|---|---|---|---|---|
| KK130S(L)-06H | 6 | 13.0 | 52.3 | 16.7 | 4.5 | 72 |
| KK130S(L)-08H | 8 | 14.8 | 53.3 | 18.6 | 6.0 | 74 |
| KK130S(L)-10H | 10 | 17.8 | 55.3 | 20.7 | 9.0 | 77 |
| KK130S(L)-12H | 12 | 20.0 | 55.3 | 21.7 | 9.0 | 80 |
| KK130S(L)-07H | 1/4 " | 13.0 | 52.3 | 16.7 | 4.5 | 72 |
| KK130S(L)-09H | 5/16 " | 14.8 | 53.3 | 18.6 | 6.0 | 74 |
| KK130S(L)-11H | 3/8 " | 17.6 | 55.3 | 20.7 | 7.0 | 79 |
| KK130S(L)-13H | 1/2 " | 20.0 | 55.3 | 21.7 | 9.0 | 78 |
Unit: mm
*Refer to the manufacturer's catalog for specifications other than those above.
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Type de raccord | Matériau du joint | Plage de températures de fonctionnement (°C) | Pipe Connection Bore Dia. | Nominal Designation of Hose (mm / (Inch)) | Applicable Hose Inner Diameter / Outer Diameter (mm) | Compatible Tube Outer Diameter (mm) | Compatible Tube Outer Diameter (Inch) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
9.16 € | 5 | 4 jours | Female Threaded Tapped | - | -20～80 | Rc 1/8 | - | - | - | - | |||
9.16 € | 5 | 4 jours | Threaded Type | - | -20～80 | R 1/8 | - | - | - | - | |||
9.16 € | 5 | 4 jours | Female Threaded Tapped | - | -20～80 | Rc 1/4 | - | - | - | - | |||
9.16 € | 5 | 4 jours | Threaded Type | - | -20～80 | R 1/4 | - | - | - | - | |||
9.16 € | 5 | 4 jours | Female Threaded Tapped | - | -20～80 | Rc 3/8 | - | - | - | - | |||
9.16 € | 5 | 4 jours | Threaded Type | - | -20～80 | R 3/8 | - | - | - | - | |||
12.02 € | 5 | 4 jours | Female Threaded Tapped | - | -20～80 | Rc 1/2 | - | - | - | - | |||
12.02 € | 5 | 4 jours | Threaded Type | - | -20～80 | R 1/2 | - | - | - | - | |||
13.15 € | 5 | 7 jours | With One-Touch Couplings | - | - | - | - | - | 6 | - | |||
9.16 € 6.14 € | 5 |
Jour même
Stock | - | - | -20～ 80 | - | 6 (1/4") | - | - | - | |||
13.15 € | 5 | 26 jours | With One-Touch Couplings | - | - | - | - | - | - | 1/4 | |||
13.15 € | 5 | 4 jours | With One-Touch Couplings | - | - | - | - | - | 8 | - | |||
9.16 € | 5 | 26 jours | - | - | -20～ 80 | - | 8 (1/4") | - | - | - | |||
13.15 € | 5 | 26 jours | With One-Touch Couplings | - | - | - | - | - | - | 5/16 | |||
13.77 € | 5 | 4 jours | With One-Touch Couplings | - | - | - | - | - | 10 | - | |||
9.16 € 6.14 € | 5 |
Jour même
Stock | - | - | -20～80 | - | 9 (3/8") | - | - | - | |||
| - | 13.77 € | 5 | 26 jours | With One-Touch Couplings | [NBR] 00011 | - | - | - | - | - | 3/8 | ||
14.90 € | 5 | 4 jours | With One-Touch Couplings | - | - | - | - | - | 12 | - | |||
12.02 € | 5 | 4 jours | - | - | -20～80 | - | 12 (1/2") | - | - | - | |||
14.90 € | 5 | 26 jours | With One-Touch Couplings | - | - | - | - | - | - | 1/2 | |||
9.73 € | 5 | 26 jours | Nut Tightening Type | - | -20～ 80 | - | - | 5/8 | - | - | |||
9.73 € | 5 | 26 jours | Nut Tightening Type | - | -20～ 80 | - | - | 6/9 | - | - | |||
| - | 12.02 € | 5 | 26 jours | Nut Tightening Type | [NBR] 00011 | -20～ 80 | - | - | 6.5/10 | - | - | ||
12.02 € | 5 | 26 jours | Nut Tightening Type | - | -20～ 80 | - | - | 8/12 | - | - | |||
14.05 € | 5 | 26 jours | Nut Tightening Type | - | -20～ 80 | - | - | 8.5/12.5 | - | - | |||
14.05 € | 5 | 26 jours | Nut Tightening Type | - | -20～ 80 | - | - | 11/16 | - | - | |||
9.16 € | 5 | 26 jours | Female Threaded Tapped | - | -20～ 80 | NPT 1/8 | - | - | - | - | |||
9.16 € | 5 | 26 jours | Threaded Type | - | -20～ 80 | NPT 1/8 | - | - | - | - | |||
9.16 € | 5 | 26 jours | Female Threaded Tapped | - | -20～ 80 | NPT 1/4 | - | - | - | - | |||
9.16 € | 5 | 26 jours | Threaded Type | - | -20～ 80 | NPT 1/4 | - | - | - | - | |||
9.16 € | 5 | 26 jours | Female Threaded Tapped | - | -20～ 80 | NPT 3/8 | - | - | - | - | |||
9.16 € | 5 | 26 jours | Threaded Type | - | -20～ 80 | NPT 3/8 | - | - | - | - | |||
12.02 € | 5 | 26 jours | Female Threaded Tapped | - | -20～ 80 | NPT 1/2 | - | - | - | - | |||
12.02 € | 5 | 26 jours | Threaded Type | - | -20～ 80 | NPT 1/2 | - | - | - | - |
Loading...
Informations de base
| Type | Standard | Mâle/femelle | Douille | Matériau du corps principal | Acier de construction |
|---|---|---|---|---|---|
| Fluide applicable | Air | Structure de la valve | Single Passage Opening Closing Type | Environnement de fonctionnement, applications | Standard |
| With or Without Check Valve | Oui |
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
Type de raccord
- Threaded Type
- Female Threaded Tapped
- With One-Touch Couplings
- Nut Tightening Type
-
Matériau du joint
- NBR
- NBR
-
Pipe Connection Bore Dia.
- NPT 1/2
- R 1/2
- Rc 1/2
- NPT 1/4
- R 1/4
- Rc 1/4
- NPT 1/8
- R 1/8
- Rc 1/8
- NPT 3/8
- R 3/8
- Rc 3/8
-
Nominal Designation of Hose(mm / (Inch))
- 6 (1/4")
- 8 (1/4")
- 9 (3/8")
- 12 (1/2")
-
Applicable Hose Inner Diameter / Outer Diameter(mm)
- 5/8
- 6/9
- 6.5/10
- 8/12
- 8.5/12.5
- 11/16
-
Compatible Tube Outer Diameter(mm)
- 6
- 8
- 10
- 12
-
Compatible Tube Outer Diameter(Inch)
- 1/2
- 1/4
- 3/8
- 5/16
-
Type
- KK130□-N□F
- KK130□-N□MS
- KK130□-□B
- KK130□-□F
- KK130□-□H
- KK130□-□MS
- KK130□-□N
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 7 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.