MISUMI Page d’accueil
Composants mécaniques
Équipement pneumatique
Vérins / actionneurs rotatifs / pinces pneumatiques
Vérins pneumatiques
Vérins spéciaux
CE1, Vérin à positions contrôlées, standard

Configurer

Stock
Afficher les articles en stock uniquement

Forme du corps principal

Forme de bloc

Cylindre de plaque

Autre

D.I. du cylindre : D(Ø)

Course : L(mm)

Cushion

Operating Pressure(MPa)

Auto Switch

Lead Wire Length(m)

Number of Switches

Type of Mount Support

Avec / Sans connecteur

Longueur de câble(m)

Type de connecteur

Type

CAO

Jours d'expédition estimés

Tout
Possibilité d’expédition le jour même
Dans les 4 jours ouvrables
Dans les 26 jours ouvrables
Dans les 31 jours ouvrables
Dans les 48 jours ouvrables

SMC

CE1, Vérin à positions contrôlées, standard

Catalogue

Référence pièce:

encore indéterminée. 379 références possibles.

Informations sur le produit
Liste des numéros de pièces
Plus d'informations
Catalogue

Informations sur le produit

Model Number Notation

Stroke Reading Cylinder CE1 Series Specifications

Type	Special Functions	Electrical Entry	Indicator Light	Wiring (Output)	Load Voltage
Type	Special Functions	Electrical Entry	Indicator Light	Wiring (Output)	DC		AC
Solid State Auto Switch	-	Grommet	Yes	3-wire (NPN)	24 V	5 V, 12 V	-
				3-wire (PNP)		5 V, 12 V
				2-wire		12 V
		Connector		2-wire		12 V
	Diagnostic indication (2-color indicator)	Grommet		3-wire (NPN)		5 V, 12 V
				3-wire (PNP)		5 V, 12 V
				2-wire		12 V
	Improved water resistance product (2-color indicator)			3-wire (NPN)		5 V, 12 V
				3-wire (PNP)		5 V, 12 V
				2-wire		12 V
	With diagnostic output (2-color indicator)			4-wire		5 V, 12 V
Reed Type Auto Switch	-	Grommet	Yes	3-wire (NPN equivalent)	-	5 V	-
				2-wire	-	-	200 V
					24 V	12 V	100 V
			No			5 V, 12 V	100 V or less
		Connector	Yes			12 V	-
		Connector	No			5 V, 12 V	24 V or less
	Diagnostic indication (2-color indicator)	Grommet	Yes			-	-

Type	Auto Switch Unit Part Number		Lead Wire Length (m)					Pre-Wired Connector	Applicable Load
Type	Perpendicular	In-Line	0.5 (Nil)	1 (M)	3 (L)	5 (Z)	None (N)	Pre-Wired Connector	Applicable Load
Solid State Auto Switch	M9NV	M9N	●	●	●	○	-	○	IC circuit	Relay, PLC
	M9PV	M9P	●	●	●	○	-	○	IC circuit
	M9BV	M9B	●	●	●	○	-	○	-
	J79C	-	●	-	●	●	●	-	-
	M9NWV	M9NW	●	●	●	○	-	○	IC circuit
	M9PWV	M9PW	●	●	●	○	-	○	IC circuit
	M9BWV	M9BW	●	●	●	○	-	○	-
	^*1: M9NAV	*¹M9NA	○	○	●	○	-	○	IC circuit
	*¹M9PAV	*¹M9PA	○	○	●	○	-	○	IC circuit
	*¹M9BAV	*¹M9BA	○	○	●	○	-	○	-
	-	F79F	●	-	●	○	-	○	IC circuit
Reed Type Auto Switch	A96V	A96	●	-	●	-	-	-	IC circuit	-
	A72	A72H	●	-	●	-	-	-	-	Relay, PLC
	*²A93V	A93	●	●	●	●	-	-	-
	A90V	A90	●	-	●	-	-	-	IC circuit
	A73C	-	●	-	●	●	●	-	-
	A80C	-	●	-	●	●	●	-	IC circuit
	A79W	-	●	-	●	-	-	-	-

*1: Water resistant type auto switches can be mounted on the above models, but the water resistance cannot be guaranteed.
Contact the SMC support center regarding water-resistant types for the above model numbers.
*2: For the 1‑m lead wire type only D-A93 is supported.

*Lead wire length symbols

0.5 m: Nil; Example: M9NW
1 m: M; Example: M9NWM
3 m: L; Example: M9NWL
5 m: Z; Example: M9NWZ
None: N; Example: J79CN

*Solid state auto switches marked with ○ are produced to order.
*Aside from those models listed above, there are other applicable auto switches.
*When mounting ø32 to 63‑mm D-A9□(V), M9□(V), M9□W(V), M9□A(V)L types on a side other than the port side, order auto switch mounting brackets separately.
*Auto switches are shipped together (but not assembled).

External Appearance / Symbols

CE1 Series external appearance

CE1 Series symbol

Mounting Bracket / Part Number

Tube Internal Diameter (mm)	Foot^*1	Flange	Double Clevis
12	CQ-L012	CQ-F012	CQ-D012
20	CQ-L020	CQ-F020	CQ-D020
32	CQ-L032	CQ-F032	CQ-D032
40	CQ-L040	CQ-F040	CQ-D040
50	CQ-L050	CQ-F050	CQ-D050
63	CQ-L063	CQ-F063	CQ-D063

*1: When ordering foot brackets, order 2 pieces per cylinder.
*2: Parts included with each bracket are as follows.

Foot, flange: body mounting bolts
Double clevis: clevis pin, type C retaining ring for shaft,
mounting bolt

Cylinder Specification

Fluid	Air
Proof Pressure	1.5 MPa
Maximum operating pressure	1.0 MPa
Minimum operating pressure	ø12 mm		ø20 to 63 mm
Minimum operating pressure	0.07 MPa		0.05 MPa
Piston Speed	70 to 500 mm/s
Ambient and Fluid Temperature	0°C to 60°C (no freezing)
Humidity	25 to 85% RH (no condensation)
Lubrication	Not required
Stroke Length Tolerance Range	ø12 mm, ø20 mm: (0 to +1.0)		ø32 mm, ø40 mm, ø50 mm, ø63 mm: (0 to +1.6)
With Air Cushion	ø12 mm, ø20 mm, ø32 mm……none		ø40 mm, ø50 mm, ø63 mm……available
Rod non-rotating accuracy	ø12 mm	ø20 mm	ø32 mm, ø40 mm, ø50 mm, ø63 mm
Rod non-rotating accuracy	±2 °	±1 °	±0.8 °
Mount Support Type	Both ends tapped (standard), foot type, flange type, double clevis type
Auto switch	Solid state type, reed type

Sensor Specification

Cable	ø7 mm, 6-core twisted pair shielded wire (oil/heat resistant, flame retardant cable)
Maximum Transmission Distance	23 m (using SMC's cable and counter)
Position Detection Method	Magnetic scale rod (non-rotating) Sensor head (incremental type)
Magnetic Field Resistance	14.5 mT
Operating Power Range	10.8 to 26.4 V DC (power ripple 1% or less)
Current Consumption	40 mA
Resolution	0.1 mm/pulse
Accuracy	±0.2 mm^*1 (at 20°C)
Output Type	Open collector (24 V DC, 40 mA)
Output Signal	A phase / B phase difference output
Insulation Resistance	500 V DC, 50 MΩ or more (between case and 12E)
Vibration-Resistance	33.3 Hz 6.8 G for 2 hours in X and Y directions, 4 hours in Z direction Based on JIS D1601
Impact Resistance	30 G, 3 times in X, Y, Z directions
Protective Enclosure	IP65 (IEC standard)^*2, not including connector
Extension Cable (Option)	5 m, 10 m, 15 m, 20 m

*1 Includes the digital display error of the counter (CEU5).
The overall accuracy after being mounted on equipment will vary depending on the mounting conditions and environment. As such, the customer should calibrate the equipment as a whole.
*2 The cylinder section is not a water-resistant protective enclosure.

Cylinder Stroke

Tube Internal Diameter (mm)	Standard Stroke (mm)												^*Manufacturable Stroke Range
Tube Internal Diameter (mm)	25	50	75	100	125	150	175	200	250	300	400	500	^*Manufacturable Stroke Range
12	●	●	●	●	●	●	-	-	-	-	-	-	25 to 150
20	●	●	●	●	●	●	●	●	-	-	-	-	25 to 300
32	-	●	●	●	●	●	●	●	●	●	-	-	25 to 400
40	-	-	-	●	●	●	●	●	●	●	●	●	25 to 600
50	-	-	-	-	-	-	-	●	-	●	-	●	25 to 600
63	-	-	-	-	-	-	-	●	-	●	-	●	25 to 600

*Cylinders with strokes other than standard can be custom ordered. Contact the SMC support center for details.
Take extra care with eccentric loads applied to the rod when the stroke is 100 mm or more and there is a bore size of 12 mm.

Usage precautions

Cannot be used in environments exposed to fluids (water, oil, coolant, etc.)
Special order types with a scraper are available. Contact the SMC support center for details. (ø32 to 63 mm)
For ø12‑mm and ø20‑mm models, use the CEP1 Series with the scraper included as standard.

Weight Table (Sensor Cable Length 0.5 m, With Connector, Without Mounting Bracket [Both Ends Tapped])

(Unit: kg)

Tube Internal Diameter (mm)	Cylinder stroke (mm)
Tube Internal Diameter (mm)	25	50	75	100	125	150	175	200	250	300	400	500
12	0.28	0.32	0.35	0.39	0.42	0.46	-	-	-	-	-	-
20	0.48	0.55	0.62	0.69	0.76	0.83	0.9	0.97	-	-	-	-
32	-	0.84	0.95	1.05	1.16	1.26	1.37	1.48	1.69	1.9	-	-
40	-	-	-	1.58	1.71	1.83	1.96	2.08	2.33	2.58	3.08	3.58
50	-	-	-	-	-	-	-	3.26	-	3.96	-	5.36
63	-	-	-	-	-	-	-	4.04	-	4.84	-	6.44

*1: Subtract 40 g from the above weight for the type with a sensor cable length of 0.5 m and without a connector (CE1□□-□Z).
Add 160 g to the above weight for the type with a sensor cable length of 3 m and with a connector (CE1□□-□L).
Add 120 g to the above weight for the type with a sensor cable length of 3 m and without a connector (CE1□□-□ZL).
*2: The mounting bracket weight is shared with the compact cylinder (CQ2 Series).

Rod End Nut Dimensions

(Units: mm)

Part Number	Applicable Bore Size (mm)	d	H	B	C	D
NTJ-015A	12	M5 ×; 0.8	4	8	9.2	7.8
NT-02	20	M8 ×; 1.25	5	13	15.0	12.5
NT-04	32, 40	M14 ×; 1.5	8	22	25.4	21.0
NT-05	50/63	M18 ×; 1.5	11	27	31.2	26

Material

ø12 mm, ø20 mm: iron
ø32 to 63 mm: rolled steel

(1 pc. included as standard.)

Diagram

ø12 mm, ø20 mm diagram

ø32 mm diagram

ø40 to 63 mm diagram

Component Parts

Number	Part Name	Material	Notes
1	Cylinder Body	Aluminum alloy	-
2	Rod Cover	Brass	ø12 to 20 mm
2	Rod Cover	Aluminum alloy	ø32 to 63 mm
3	Head Cover	Aluminum alloy	-
4	Piston	Aluminum alloy	-
5	Piston Rod	Stainless steel	-
6	Rod Cover Disc	Aluminum alloy	-
7	Sensor Unit	-	-
8	Sensor Setting Bracket	Stainless steel	-
9	Sensor Set Piece Assembly	-	ø20 to 63 mm
10	Pin	Stainless steel	ø12 to 32 mm
11	Sensor Guide	Lead-bronze casting	ø32 to 63 mm
12	Case Setting Nut	Carbon steel	ø32 to 63 mm
13	Cushion Ring A	Rolled steel	ø40 to 63 mm
14	Cushion Ring B	Rolled steel	ø40 to 63 mm
15	Cushion Valve	-	ø40 to 63 mm
16	Piston Nut	Rolled steel	ø40 to 63 mm
17	Port Joint	Stainless steel	ø40 to 63 mm
18	Wear Ring	Resin	ø40 to 63 mm
19	Rod End Nut	Carbon steel	-
20	Sensor Setting Plate	Cold rolled special steel strip	-
21	Type C Retaining Ring	Carbon steel	-
22	Magnet	-	-
23	Cross-Recessed Round Head Screw	Carbon steel wire	-
24	Cross-Recessed Countersunk Head Screw	Carbon steel wire	-
25	Hex Socket Head Cap Screw	Chrome molybdenum steel	-
26	Spring Washer	Steel wire	-
27	Case Gasket	NBR	-
28	Case Screw Gasket	NBR	-
29	Piston Seal	NBR	-
30	Rod Seal	NBR	-
31	Gasket	NBR	-
32	Cushion Seal	NBR	-
33	Piston Gasket	NBR	-
34	Port Seal	NBR	-
35	Joint Seal	NBR	-
36	Valve Seal	NBR	-
37	Valve Retainer Seal	NBR	-
38	Spacer for Switch Type	Aluminum alloy	ø12 mm

*As there is a possibility of improper operation, be sure to contact the SMC support center regarding seal replacement.
*See the SMC catalog for other specifications.

Liste des numéros de pièces

Nombre d’articles

...

Référence pièce

Forme du corps principal

D.I. du cylindre : D

(Ø)

Course : L

(mm)

Cushion

Operating Pressure

(MPa)