- Forme du corps principal
- Guidé
- D.I. du cylindre : D(Ø)
- 20
- Environnement, applications
- Cushion
- Operating Pressure(MPa)
- Specifications
- Port thread type
- Auto Switch
- Rod Tip Shape
- Custom-made Specifications
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
MTS, Vérin de précision (alésage 12-40) (MTS20-200M)
Informations sur le produit
Precision Cylinder MTS Series Specifications
Precision Cylinder MTS Series external appearance
| Tube Inner Diameter (mm) | 8 | 12 | 16 | 20 | 25 | 32 | 40 | |
|---|---|---|---|---|---|---|---|---|
| Spline Rod Diameter (mm) | 4 | 6 | 8 | 10 | 13 | 16 | 20 | |
| Fluid | Air | |||||||
| Minimum Operating Pressure | Without End Lock | 0.15 MPa | 0.12 MPa | 0.1 MPa | ||||
| *With End Lock | - | 0.17 MPa | 0.15 MPa | |||||
| Maximum operating pressure | 0.7 MPa | |||||||
| Proof Pressure | 1.0 MPa | |||||||
| Ambient and Fluid Temperature | -10°C to 60°C (no freezing) | |||||||
| Bearing Type | Ball spline | |||||||
| Cushioning | Rubber cushion | Air cushion | ||||||
| Effective Cushion Length (mm) | - | 9 | 10 | 11 | 12 | 17 | 17 | |
| Lubrication | Not required (non-lubricated) | |||||||
| Operating Piston Speed (mm/s) | 50 to 500 | 50 to 800 | ||||||
| Allowable Kinetic Energy J | 0.02 | 0.19 | 0.32 | 0.55 | 0.78 | 1.6 | 2.8 | |
| Stroke Tolerance | (0 to +1.0) mm | |||||||
| Non-Rotating Accuracy | 0.2° or less (within allowable torque value) | 0.1° or less (within allowable torque value) | ||||||
| Piping Connection Port Diameter | - | M3 ×; 0.5 | M5 ×; 0.8 | M5 ×; 0.8 | M5 ×; 0.8 | M5 ×; 0.8 | Rc 1/8 | Rc 1/8 |
| TN | - | - | - | - | - | NPT 1/8 | NPT 1/8 | |
| TF | - | - | - | - | - | G1/8 | G1/8 | |
*Excluding the lock parts, bore size 12 mm and 16 mm: 0.12 MPa, Bore size 20 to 40 mm: 0.10 MPa
Standard Stroke Table / End Lock Specifications
| Tube Inner Diameter (mm) | Standard Stroke (mm) |
|---|---|
| 8 | 5, 10, 15, 20, 25, 30 |
| 12/16 | 25, 50, 75, 100 |
| 20, 25, 32, 40 | 25, 50, 75, 100, 125, 150, 175, 200 |
*Strokes not listed above are all produced to order.
| Tube Inner Diameter (mm) | 12 | 16 | 20 | 25 | 32 | 40 |
|---|---|---|---|---|---|---|
| Lock position | Head side only | |||||
| Holding Force (MAX) N | 29 | 53 | 82 | 125 | 211 | 329 |
| Backlash | 1 mm | |||||
| Manual Lock Release | Non-locking type only | |||||
Diagram
Basic type bore size 8 mm diagram
Basic type bore size 12 to 40 mm diagram
With end lock bore size 12 to 40 mm diagram
*Cannot be disassembled.
Dedicated tools are required for disassembly and reassembly. Contact the SMC support center regarding seal replacement.
Component Parts
| Number | Part Name | Material | Quantity | Notes |
|---|---|---|---|---|
| 1 | Rod cover | Aluminum alloy | 1 | Clear anodizing |
| 2 | Head cover | Aluminum alloy | 1 | Clear anodizing |
| 3 | Cylinder Tubing | Aluminum alloy | 1 | Hard anodized aluminum |
| 4 | Piston | Aluminum alloy | 1 | - |
| 5 | Spacer for Switch Type | Aluminum alloy | 1 | Chromate |
| 6 | Spline Rod | Stainless steel | 1 | ø8 mm: quenched |
| Carbon steel | 1 | ø12 mm to ø40 mm: quenched / hard chrome plating | ||
| 7 | Cushion Bolt | Stainless steel | 1 | ø8 to 16 mm |
| Carbon steel | 1 | ø20 to 40 mm: zinc chromate | ||
| 8 | End Lock Bolt | Carbon steel | 1 | Quenched / zinc chromate |
| 9 | Collar | Aluminum alloy | 1 | Chromate |
| 10 | Spline Nut | - | 1 | - |
| 11 | Cushion Needle | Carbon steel | 2 | Nickel plating |
| 12 | Cap | Copper alloy | 1 | Nickel plating |
| 13 | Lock Piston | Carbon steel | 1 | Quenched / hard chrome plated |
| 14 | Lock Spring | Steel wire | 1 | Zinc chromate |
| 15 | Damper | Urethane | 2 | ø8 mm |
| 1 | ø12 to 40 mm | |||
| 16 | Key | Carbon steel | 1 | - |
| 17 | Type C Retaining Ring for Hole | Carbon tool steel | 2 | ø8 mm: phosphate conversion coating |
| 1 | ø12 to 40 mm: phosphate conversion coating | |||
| 18 | Magnet | - | 1 | - |
| 19 | Plug | Alloy steel | 3 | Nickel plating |
| 20 | Hex Socket Head Set Screw | Alloy steel | 1 | Black zinc chromate |
| 21 | Piston Seal | NBR | 1 | - |
| 22 | Spline Seal | NBR | 1 | ø8 mm: rod seal |
| 23 | Collar Gasket | NBR | 1 | - |
| 24 | Tube Gasket | NBR | 1 | ø8 mm |
| 2 | ø12 to 40 mm | |||
| 25 | Piston Gasket | NBR | 1 | - |
| 26 | Cushion Seal | Urethane | 2 | - |
| 27 | Needle Gasket | NBR | 2 | - |
| 28 | Piston Seal for Lock | NBR | 1 | - |
| 29 | Cap Gasket | NBR | 1 | - |
Drawing
*Spline rod width across flats is not related to the position of the body mounting face.
MTS8 Dimensions
(Units: mm)
Basic type bore size 8 mm dimensional drawing
Bore size 8 mm male threaded rod end dimensional drawing
MT12 dimensions
(Units: mm)
Basic type bore size 12 mm dimensional drawing
Bore size 12 mm male threaded rod end dimensional drawing
Bore size 12 mm with end lock dimensional drawing
- *Product pictures are representative images. CAD data is not supported for some model numbers.
- *See the SMC catalog for other specifications, dimensions, etc.
Plus d'informations
Informations de base
A precision cylinder with an internal guide function that can be mounted with high accuracy.
[Features]
· Deflection: 0.1 mm or less (within the allowable lateral load value of MTS12-25).
· Requires less mounting space. Reduced labor for design and assembly.
· Auto switches can be mounted on 4 surfaces (bore size 8 mm: 2 surfaces).
· 3 types of mounting are possible. Tapped mounting (bottom mounting, front mounting), Through-hole mounting (both sides mounting).
· 2 types of rod end configuration (Standard: rod end female thread, Option: rod end male thread, using stud bolt).
· Air cushion available as standard (bore size 8 mm: rubber bumper).
· Head side end lock type added to series (bore size 12 to 40 mm).
· The specially configured rod seal design delivers sealing and durability equivalent to conventional round rod models.
Attention
- ■ Gamme de produits SMC
Les pages Web relatives aux produits qui ne possèdent pas de page spécifique sur ce site seront publiées au cas par cas. - Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.
- Les données CAD ne sont pas disponibles pour certains modèles.