Tube antistatique gamme TA (TAU3220B-20)

Tube antistatique gamme TA TAU3220B-20

Détails du produit:

Référence fabricant: TAU3220B-20

Marque: SMC

Prix: 72.06

Délai de livraison: 3 jours


Données techniques:

D.E. D: - Ø

D.E. [Distinction]: Jusqu'à 4

D.I. d: 2 Ø

Matériau: Uréthane

D.I. [Distinction]: Jusqu'à 2


(i)Remarque

  • The maximum operating pressure values listed are at 20°C. See the catalog for details.
  • For specifications and details, please refer to the catalog.
  • The last digits of the product codes indicate the length of the tubings.

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

TAU3220B-20

Specifications Of Antistatic Soft Nylon Tubing / TAS Series

Maximum operating pressure

Maximum operating pressure

Series List

Nominal TAS3222 TAS0425 TAS0604 TAS0805 TAS1065 TAS1208
Outer diameter (mm) 3.2 4 6 8 10 12
Inner diameter (mm) 2.2 2.5 4 5 6.5 8

Specifications

Fluid Air
Maximum operating pressure (MPa) 20°C 1.2
40°C 1.0
Recommended fittings Antistatic one-touch fittings: KA Series, Miniature fittings: M, MS SeriesNote)
Minimum bending radius mm 12 12 15 19 27 32
Operating temperature 0 to 40°C
Material Conductive nylon + Flame-retardant nylon (equivalent to UL-94 standard V-0)
Surface resistance 104 to 107 Ω

Note) Miniature fittings: Only the following types are available for M and MS series.

M, MS Series That Can Be Used

M Series MS Series
M-3AU-3, M-3AU-4, M-5AU-3, M-5AU-4
M-5AU-6, M-5H-4, M-5H-6
MS-5AU-3, MS-5AU-4, MS-5AU-6
MS-5H-4, MS-5H-6

Caution

  • Abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
  • The minimum bending radius indicates the value at a temperature of 20°C with an outside diameter rate of change of 10% or less.
  • Please exercise caution when using this item in a clean room. There is a possibility of plasticizers and other materials precipitating on the tube surface and detracting from the cleanliness level of the room.

Made-to-order specifications: Coil tubing: Please contact SMC for details.

Specifications Of Antistatic Polyurethane Tubing / TAU Series

Maximum operating pressure

Maximum operating pressure

Series List

Nominal TAU3220 TAU0425 TAU0604 TAU0805 TAU1065 TAU1208
Outer diameter (mm) 3.2 4 6 8 10 12
Inner diameter (mm) 2 2.5 4 5 6.5 8

Specifications

Fluid Air
Maximum operating pressure (MPa) 20°C 0.9
40°C 0.7
Recommended fittings Antistatic one-touch fittings: KA Series, Miniature fittings: M, MS SeriesNote)
Minimum bending radius mm 10 10 15 20 27 35
Operating temperature 0 to 40°C
Material Antistatic polyurethane
Surface resistance 104 to 107 Ω
Minimum bending radius

Minimum bending radius

Bend the tube into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the tube breaks or is crushed.

Caution

  1. 1. Abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
  2. 2. The value of the minimum bending radius is measured at a temperature of 20°C as shown above.
  3. 3. Because ester polyurethane is adopted, water cannot be used due to the occurrence of hydrolysis.
Référence pièce
TAU3220B-20
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
D.E. D
(Ø)
D.E. [Distinction] D.I. d
(Ø)
Matériau D.I. [Distinction] Matériau, uréthane Matériau : nylon Rayon de pliage minimum
(mm)
Bundle winding length
(m)
Reel winding length
(m)
Pression de service maximum
(MPa)

72.06 €

1 3 jours -Jusqu'à 42UréthaneJusqu'à 2[Polyuréthane] 00009-1020-0.9

Loading...

  1. 1

Informations de base

Type Droit Utilisation du service de découpe NA Fluide applicable Air
Environnement de fonctionnement Standard Couleur Blanc (couleur du matériau) Température de service(°C) 0 à +40

Vous vous trouvez sur la page de Tube antistatique gamme TA, le numéro d'article est le suivant: TAU3220B-20.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TAU3220B-20.

Variantes de ce produit

Référence pièce
TAS0425B-100
TAS0425B-20
TAS0604B-100
TAS0604B-20
TAS0805B-100
TAS0805B-20
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?
D.E. D
(Ø)
D.E. [Distinction] D.I. d
(Ø)
Matériau D.I. [Distinction] Matériau, uréthane Matériau : nylon Rayon de pliage minimum
(mm)
Bundle winding length
(m)
Reel winding length
(m)
Pression de service maximum
(MPa)

236.90 €

1 26 jours -Jusqu'à 4-[Résine polyoléfinique] Résine polyoléfiniqueJusqu'à 3-[Autres] Nylon ignifuge (UL-94Std. équivalent V-0--1001.2

47.47 €

1 Jour même

Stock

4Jusqu'à 42.5[Résine polyoléfinique] Résine polyoléfiniqueJusqu'à 3-[Autres] Nylon ignifuge (UL-94Std. équivalent V-01220-1.2

352.82 €

1 26 jours -Jusqu'à 6-[Résine polyoléfinique] Résine polyoléfiniqueJusqu'à 4-[Autres] Nylon ignifuge (UL-94Std. équivalent V-0--1001.2

70.60 €

1 Jour même

Stock

6Jusqu'à 64[Résine polyoléfinique] Résine polyoléfiniqueJusqu'à 4-[Autres] Nylon ignifuge (UL-94Std. équivalent V-01520-1.2

784.60 €

1 26 jours -Jusqu'à 8-[Résine polyoléfinique] Résine polyoléfiniqueJusqu'à 5-[Autres] Nylon ignifuge (UL-94Std. équivalent V-0--1001.2

156.98 €

1 Jour même

Stock

8Jusqu'à 85[Résine polyoléfinique] Résine polyoléfiniqueJusqu'à 5-[Autres] Nylon ignifuge (UL-94Std. équivalent V-01920-1.2

Assistance technique