- Régulateur, soupape de suralimentation
- Type de régulateur
- Fluide applicable
- Environnement de fonctionnement
- Mécanisme d'échappement
- Fourni
- Disponible
- Fonction contre-courant
- Côté alimentation, type de connexion
- Simple effet
- Simple pression (mm)
- Côté alimentation, diam. de connexion
- Côté commande, types de connexions
- Simple effet
- Simple pression (mm)
- Côté commande, diamètre de connexion
- Jauge de pression
- Non fourni
- N/A
- Signal d'entrée / Signal de communication
- 0 à 10VDC
- Type de source de tension 0 à 10VDC
- Accessory
- Set Pressure
- Specifications
- In Side Tube Size / Fitting Size
- Out Side Tube Size / Fitting Size
- Power Supply Voltage
- Cable Connector Type
- Pressure Range
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
ITV00**, Régulateur électropneumatique compact (ITV0030-3S)
Attention
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.
- Prix unitaire (hors TVA)
- 315.74 €
- Total (hors TVA)
- 315.74 €Prix TTC) : 375.73 €
- Délai d'expédition prévu
- 26 jours ouvrablesDate d'expédition prevue : 02.06.2025
| Quantité | 1 - 10 | 11+ |
|---|---|---|
| Prix unitaire (hors TVA) (Prix unitaire TTC) | 315.74 € (375.73 €) | 315.74 € (375.73 €) |
| Jours d'expédition | 26 jours | Devis |
- * À propos du délai d'expédition, frais de transport et des prix
Informations sur le produit
ITV0000 Series Compact Electro-Pneumatic Regulator Details
ITV0000 Series Compact Electro-Pneumatic Regulator product image
ITV0000 Series Compact Electro-Pneumatic Regulator Specifications
| Model | ITV001□ | ITV003□ | ITV005□ | |
|---|---|---|---|---|
| Minimum supply pressure | Set pressure +0.1 MPa | |||
| Maximum supply pressure | 0.2 MPa | 1.0 MPa | ||
| Set pressure range | 0.001 to 0.1 MPa | 0.001 to 0.5 MPa | 0.001 to 0.9 MPa | |
| Power supply | Voltage | 24 V DC ±10%, 12 to 15 V DC | ||
| Current consumption | Power supply voltage 24 V DC type: 0.12 A or less Power supply voltage 12 to 15 V DC type: 0.18 A or less | |||
| Input signal | Voltage type | 0 to 5 V DC, 0 to 10 V DC | ||
| Current type | 4 to 20 mA DC, 0 to 20 mA DC (sink type) | |||
| Input impedance | Voltage type | Approx. 10 k Ω | ||
| Current type | Approx. 250 Ω | |||
| Output signalNote 4) | Analog output | 1 to 5 V DC (load impedance: approx. 1 kΩ) Output accuracy: within ±6% (F.S.) | ||
| Linearity | Within ±1% (F.S.) | |||
| Hysteresis | Within 0.5% (F.S.) | |||
| Repeatability | ±0.5% F.S. or less | |||
| Sensitivity | 0.2% F.S. or less | |||
| Temperature characteristics | Within ±0.12% (F.S.) / °C | |||
| Operating temperature range | 0 to 50°C (no condensation) | |||
| Enclosure | Equivalent to IP65* | |||
| Connection type | Built-in single-action fittings | |||
| Connection size | For single unit | Metric size | (1), (2), (3): ø4 | |
| Inch size | (1), (2), (3): ø5/32 " | |||
| Manifold | Metric size | (1), (3): ø6, (2): ø4 | ||
| Inch size | (1), (3): ø1/4 (diameter 1/4 mm), (2): ø5/32 (diameter 5/32 mm) " | |||
| WeightNote 1) | 100 g or less (without options) | |||
- *Note 1) Indicates the weight of a single unit. For the IITV00-n, the total weight (g) ≤ stations (n) ×; 100 + 130 (weight of end block A, B assembly) + weight (g) of DIN rail.
- *Note 2) When there is downstream flow consumption, pressure may become unstable depending on the piping conditions.
- *Note 3) When the input signal is 0%, the exhaust solenoid valve is controlled to make the secondary pressure zero. As a result, a noise may occur, but this does not indicate a malfunction.
- *Note 4) When measuring ITV analog output from 1 to 5 V DC with a load impedance of less than 100 kΩ, an analog monitor output accuracy of within ±6% (F.S.) may not be available. If accuracy within ±6% is required, please contact the manufacturer with your request. Output pressure remains unaffected.
- *When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use.
Accessories (Options)
Flat bracket assembly (2 mounting screws included) P39800022
L bracket assembly (2 mounting screws included) P39800023; tightening torque when assembled is 0.3 N·m
Straight type cable connector M8-4DSX3MG4
Right-angle type cable connector P398000-501-2
Model Number Notation
Model number example
ITV0000 Series Compact Electro-Pneumatic Regulator dimensions
For single unit
(Unit: mm)
ITV0000 Series Compact Electro-Pneumatic Regulator for single unit, dimensional drawing
Single Unit for Manifold
(Unit: mm)
ITV0000 Series Compact Electro-Pneumatic Regulator single unit for manifold, dimensional drawing
Plus d'informations
Informations de base
ITV0000 Series Compact Electro-Pneumatic Regulator realizes space savings and reduction of weight for manifold use.
[Features]
· DIN rail mount design lets you easily add or remove stations.
· Compact (15 mm) and lightweight (100 g).
· 2 types of cable connectors are available: straight type and right-angle type.
· Built-in single-action fitting.
· With error indication LED.
· 2 types of brackets are available: flat brackets and L-shaped brackets.
· IP65 equivalent enclosure protection.
· Linearity: within ±1% (full span).
Attention
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.
