• Marques
  • Société
  • Contact
FR
Type Code Seach | *NOT READY*
#CODE
Suggestion de mots-clés
Suggestions de numéros d'articles
Produits discontinués

Lifting eye bolts (rotating), Steel

Lifting eye bolts (rotating), Steel
  • En promotion
  • Remise sur volume

GANTER

GANTER

The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

Fiche technique

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

GN 581 / Lifting Eye Bolts (Rotating)

Information


The lifting eye bolts GN 581 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring. Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

see also...
Stainless Steel-Lifting eye bolts GN 581.5

How to Order

How to order
1d1
2Type

Specification

• Ring
 Steel, German Material No. 1.6541
  - Forged
  - High-tensile tempered
   100% electro magnetic tensile tested to EN 1677
  - Plastic coated, pink
• Bolt
 Steel
  - Tensile strength class 10.9
  - 100% electro magnetic tensile tested
• Strength values of screws
• RoHS compliant

Dimensions

d1d2d3d4d5hk1k2Length lNominal load (WLL)
M 6132328203773790.1 t [1.0 kN]
M 81625302546947120.3 t [3.0 kN]
M 101625302546947150.4 t [4.0 kN]
M 1220303430551056180.75 t [7.5 kN]
M 1623.5364035641365241.5 t [15.0 kN]
M 2029415040751676302.3 t [23.0 kN]
M 2435516049901992363.2 t [32.0 kN]
M 304466756011324114454.5 t [45.0 kN]
M 365375907213529135547.0 t [70.0 kN]

Method of Mounting

Method of
mounting
Number11222223 and 43 and 43 and 4
Angles of
inclination		0°90°0°90°0 to 45°45 to 60°asymm.0 to 45°45 to 60°asymm.
Factor11221.4112.11.51
M 60.500.10 t1.000.20 t0.140.10 t0.10 t0.21 t0.15 t0.10 t
M 81.00 [ 0.14]0.30 t2.00 [0.28]0.60 t0.42 [0.10]0.30 t0.30 t0.63 t0.45 t0.30 t
M 101.00 [0.23]0.40 t2.00 [0.46]0.80 t0.56 [0.17]0.40 t0.40 t0.84 t0.60 t0.40 t
M 122.00 [0.34]0.75 t4.00 [0.68]1.50 t1.00 [0.24]0.75 t0.75 t1.60 t1.12 t0.75 t
M 164.00 [0.70]1.50 t8.00 [1.40]3.00 t2.10 [0.50]1.50 t1.50 t3.15 t2.25 t1.50 t
M 206.00 [1.20]2.30 t12.00 [2.40]4.60 t3.22 [0.86]2.30 t2.30 t4.83 t3.45 t2.30 t
M 248.00 [1.80]3.20 t16.00 [3.60]6.40 t4.48 [1.29]3.20 t3.20 t6.70 t4.80 t3.20 t
M 3012.00 [3.20]4.50 t24.00 [6.40]9.00 t6.30 [2.30]4.50 t4.50 t9.40 t6.70 t4.50 t
M 3616.00 [4.60]7.00 t32.00 [9.20]14.00 t9.80 [3.30]7.00 t7.00 t14.70 t10.50 t7.00 t

Safety Instructions

The loads given in brackets refer to the load capacity of the corresponding lifting eye bolt DIN 580. If such a value is not indicated the use of the lifting eye bolts DIN 580 is not permitted!
The bolt-on surface for the lifting eye bolts GN 581 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.
Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.
Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.
The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of -40° C to + 100° C. Load-bearing capacity under different conditions upon request.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com).
Données à afficher
30
45
60
  1. 1
Référence pièce
581-M6-A
581-M6-B
581-M8-A
581-M8-B
581-M10-A
581-M10-B
581-M12-A
581-M12-B
581-M16-A
581-M16-B
581-M20-A
581-M20-B
581-M24-A
581-M24-B
581-M30-A
581-M30-B
581-M36-A
581-M36-B
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Thread d1 Type Weight

90.70 €

1 Disponible 7 jours M 6A-without spanner0.120

101.76 €

1 Disponible 7 jours M 6B-with spanner0.080

84.46 €

1 Disponible 7 jours M 8A-without spanner0.100

94.96 €

1 Disponible 7 jours M 8B-with spanner0.120

83.00 €

1 Disponible 7 jours M 10A-without spanner0.120

94.60 €

1 Disponible 7 jours M 10B-with spanner0.120

91.70 €

1 Disponible 7 jours M 12A-without spanner0.180

105.76 €

1 Disponible 7 jours M 12B-with spanner0.190

107.66 €

1 Disponible 7 jours M 16A-without spanner0.320

122.70 €

1 Disponible 7 jours M 16B-with spanner0.340

140.40 €

1 Disponible 7 jours M 20A-without spanner0.490

158.62 €

84.07 €

1 Disponible Jour même

Stock

M 20B-with spanner0.555

193.82 €

1 Disponible 7 jours M 24A-without spanner0.900

215.98 €

90.71 €

1 Disponible Jour même

Stock

M 24B-with spanner0.990

273.78 €

1 Disponible 7 jours M 30A-without spanner1.930

300.48 €

1 Disponible 7 jours M 30B-with spanner1.860

449.28 €

1 Disponible 7 jours M 36A-without spanner3.100

477.92 €

1 Disponible 7 jours M 36B-with spanner3.500

Loading...

  1. 1
 

Configurer

Réinitialiser

18Numéro de référence applicable suggérée

Afficher les numéros de référence

Certaines spécifications ne sont pas encore précisées.
Le numéro de référence est identifié.

Stock

Propriétés de base

Filtrer par jours d'expédition standard

Propriétés optionnelles

Assistance technique

Question technique

Mode de paiement

  • Facture
  • Prépaiement
  • PayPal

Fabrication à la demande

Changer de vue

Certificats

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI dans le monde

Social Media

Informations légales

Copyright © MISUMI Corporation All Rights Reserved.