- Fluide applicable
- Environnement de fonctionnement
- Type à commutation
- Type de connexion
- NPT
- Filetage nominal de tuyauterie
- Diam. d'orifice(Ø)
- 5
- Tension
- Matériel d'étanchéité
- Direction de sortie du fil de sortie
- Option
- Matériau du corps
- Support
- Fonctions
- Entrée électrique du fil de sortie
- Puissance apparente(VA)
- 7
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
Électrovanne 2 ports à commande directe gamme VX21 / 22 / 23 (VX214FZ2GB)
Informations sur le produit
Direct Operated 2 Port Solenoid Valve VX21/VX22/VX23 Series Features
| Valve Specifications | Valve Construction | Direct operated poppet | |
|---|---|---|---|
| Withstand Pressure | 2.0 MPa (resin body type: 1.5 MPa) | ||
| Body Material | Aluminum, resin, C37, Stainless steel | ||
| Seal Material*3 | NBR, FKM | ||
| Enclosure | Dustproof, water-jet-proof type (IP65)*1, *4 | ||
| Environment | Locations without corrosive or explosive gases | ||
| Coil Specifications | Rated Voltage | AC | 100 V AC, 200 V AC, 110 V AC, 230 V AC, (220 V AC, 240 V AC, 48 V AC, 24 V AC)*2 |
| DC | 24 V DC, (12 V DC)*2 | ||
| Allowable Voltage Fluctuation | ±10% of rated voltage | ||
| Allowable Leakage Voltage | AC | 5% or less of rated voltage | |
| DC | 2% or less of rated voltage | ||
| Coil Insulation Type | Class B, class H | ||
*1 Electrical entry "Faston" type terminal is IP40 compliant.
*2 Voltage inside () indicates special voltage.
*3 Refer to X332 regarding seal material / EPDM.
*4 See glossary for information on protection grades. Contact the SMC support center regarding use in locations that require water resistance.
- *Be sure to read the individual product precautions before use.
For Air Single Unit Specifications
N.C. type flow passage symbol
N.C. type external appearance
Aluminum Body Type
| Size | Port Size | ø(Orifice Diameter mm)*1 | Model | Flow Rate Characteristics*2 | Maximum Operating Pressure Differential MPa *4 | Maximum System Pressure MPa *4 | Weight*3 (g) | ||
|---|---|---|---|---|---|---|---|---|---|
| C [dm3/(s·bar)] | b | Cv | |||||||
| 1 | 1/8, 1/4 | 2 | VX210 | 0.63 | 0.63 | 0.23 | 1.0 | 1.0 | 220 |
| 3 | 1.05 | 0.68 | 0.41 | 0.6 | 220 | ||||
| 5 | 2.20 | 0.39 | 0.62 | 0.2 | 220 | ||||
| 2 | 1/4, 3/8 | 4 | VX220 | 1.90 | 0.52 | 0.62 | 1.0 | 340 | |
| 7 | 3.99 | 0.44 | 1.08 | 0.15 | 340 | ||||
| 3 | 1/4, 3/8 | 5 | VX230 | 1.96 | 0.55 | 0.75 | 1.0 | 450 | |
| 8 | 5.67 | 0.33 | 1.58 | 0.3 | 450 | ||||
| 10 | 5.74 | 0.64 | 2.21 | 0.1 | 450 | ||||
| 1/2 | 10 | 8.42 | 0.39 | 2.21 | 0.1 | 470 | |||
Resin Body Type (Built-In One-Touch Fitting)
| Size | Port Size | ø(Orifice Diameter mm)*1 | Model | Flow Rate Characteristics*2 | Maximum Operating Pressure Differential MPa *4 | Maximum System Pressure MPa *4 | Weight*3 (g) | ||
|---|---|---|---|---|---|---|---|---|---|
| C [dm3/(s·bar)] | b | Cv | |||||||
| 1 | ø6 mm | 2 | VX210 | 0.82 | 0.44 | 0.23 | 1.0 | 1.0 | 220 |
| 3 | 1.25 | 0.34 | 0.35 | 0.6 | 220 | ||||
| 5 | 1.45 | 0.43 | 0.40 | 0.2 | 220 | ||||
| ø8 mm | 2 | 0.82 | 0.44 | 0.23 | 1.0 | 220 | |||
| 3 | 1.81 | 0.40 | 0.41 | 0.6 | 220 | ||||
| 5 | 2.11 | 0.32 | 0.56 | 0.2 | 220 | ||||
| 2 | ø8 mm | 4 | VX220 | 1.69 | 0.40 | 0.47 | 1.0 | 340 | |
| 7 | 3.14 | 0.34 | 0.84 | 0.15 | 340 | ||||
| ø10 mm | 4 | 1.68 | 0.49 | 0.50 | 1.0 | 340 | |||
| 7 | 3.54 | 0.36 | 0.90 | 0.15 | 340 | ||||
| 3 | ø10 mm | 5 | VX230 | 2.50 | 0.44 | 0.70 | 1.0 | 460 | |
| 8 | 2.77 | 0.82 | 1.22 | 0.3 | 460 | ||||
| 10 | 5.69 | 0.46 | 1.54 | 0.1 | 460 | ||||
| ø12 mm | 5 | 2.50 | 0.44 | 0.70 | 1.0 | 460 | |||
| 8 | 2.56 | 0.88 | 1.38 | 0.3 | 460 | ||||
| 10 | 5.69 | 0.64 | 1.76 | 0.1 | 460 | ||||
*1: Orifice sizes are for reference. Check the flow rate characteristics (conversion Cv).
*2: There are variations in the flow rate characteristics of the product.
If high precision flow rate control is needed for the system, adjust accordingly by selecting an orifice that is at least 1.3 times larger in diameter and use a diaphragm, etc., on the secondary side of the solenoid valve.
*3: This is the grommet value. Add 10 g for conduit types, 30 g for DIN terminals, 60 g for conduit terminals respectively.
*4: See the glossary for details on the maximum operating pressure differential and the maximum system pressure.
Fluid Temperature and Ambient Temperature
- Fluid temperature: -10 to +60°C *: Dew point temperature: -10°C or less
- Ambient temperature: -20 to +60°C
Valve Leakage Rate
Internal Leakage
| Seal material*2 | Leakage Rate (Air)*1 |
|---|---|
| NBR (FKM) | 1 cm3/min or less (aluminum body type) |
| 15 cm3/min or less (resin body type) |
Exterior Leakage
| Seal material*2 | Leakage Rate (Air)*1 |
|---|---|
| NBR (FKM) | 1 cm3/min or less (aluminum body type) |
| 15 cm3/min or less (resin body type) |
*1: The leakage rate is at an ambient temperature of 20°C.
*2: See the special options in the catalog for FKM sealing material.
*3: The leakage amount is at 20°C and with a differential pressure of 0.01 MPa or more. Contact the SMC support center when the differential pressure is less than 0.01 MPa.
- *Refer to the SMC catalog for other part numbers.
Plus d'informations
Informations de base
SMC Solenoid Valve.
[Features]
· IP65 protective enclosure
· UL94V-0 conforming flame resistance
· Low noise construction
· Piping variations
· Clearance
· Improved armature durability
Attention
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.