- Stock
- Afficher les articles en stock uniquement
- Environnement de fonctionnement
- Type à commutation
- Type de connexion
- Rc (R)
- Rc
- G
- NPT
- Raccord de tube
- Diam. d'orifice(Ø)
- 10
- 15
- 20
- 25
- Type d'ouverture de tuyau (détails)
- Direction de sortie du fil de sortie
- Type détaillé
- Entrée électrique du fil de sortie
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Possibilité d’expédition le jour même
- Dans les 4 jours ouvrables
- Dans les 7 jours ouvrables
- Dans les 16 jours ouvrables
- Dans les 22 jours ouvrables
- Dans les 24 jours ouvrables
- Dans les 25 jours ouvrables
- Dans les 26 jours ouvrables
- Dans les 31 jours ouvrables
- Dans les 33 jours ouvrables
Électrovanne 2 ports à pilote de type pression différentielle nulle gamme VXZ(Liste des numéros de pièces : page 23)
Référence pièce:
références possibles.Informations sur le produit
Zero Differential Pressure Type Pilot Operated 2 Port Solenoid Valve VXZ Series Specifications
For Air (N.C. Type)
*Can also be used for low vacuums (up to 133 Pa.abs).
For air (N.C. type) external appearance
Fluid and Ambient Temperature
- Fluid temperature: -10* to +60°C
- Ambient temperature: -20 to +60°C
*Dew point temperature: -10°C or less
Valve Leakage Amount (Air*1, *2) Internal Leakage / Seal Material: NBR (FKM)*3
- Aluminum body type: 15 cm3/min or less
- Resin body type: 15 cm3/min or less
- Metal body type: 1 cm3/min or less
Valve Leakage Amount (Air*1) External Leakage / Seal Material: NBR (FKM)*3
- Aluminum body type: 15 cm3/min or less
- Resin body type: 15 cm3/min or less
- Metal body type: 1 cm3/min or less
*1: The leakage rate is at an ambient temperature of 20°C.
*2: The leakage rate is at a pressure differential of 0.01 MPa up to the maximum operating pressure differential.
*3: See the SMC catalog regarding FKM sealing material and then select based on the other options.
*4: If using for low vacuum specifications (up to 133 Pa.abs) pay attention to the leakage amount detailed above.
For Air (N.O. Type)
For air (N.O. type) external appearance
Fluid and Ambient Temperature
- Fluid temperature: -10* to +60°C
- Ambient temperature: -20 to +60°C
*Dew point temperature: -10°C or less
Valve Leakage Amount (Air*1, *2) Internal Leakage / Seal Material: NBR (FKM)*3
- Aluminum body type: 15 cm3/min or less
- Resin body type: 15 cm3/min or less
- Metal body type: 1 cm3/min or less
Valve Leakage Amount (Air*1) External Leakage / Seal Material: NBR (FKM)*3
- Aluminum body type: 15 cm3/min or less
- Resin body type: 15 cm3/min or less
- Metal body type: 1 cm3/min or less
*1: The leakage rate is at an ambient temperature of 20°C.
*2: The leakage rate is at a pressure differential of 0.01 MPa up to the maximum operating pressure differential.
*3: See the SMC catalog regarding FKM sealing material and then select based on the other options.
For Water (N.C. Type)
*Can also be used for air (vacuums up to 133 Pa.abs). However, be aware that the maximum operating pressure differential and flow rate characteristics will be limited to the specifications range for the air-use type.
For water (N.C. type) external appearance
Fluid and Ambient Temperature
- Fluid temperature: 1 to 60°C
- Ambient temperature: -20 to +60°C
*No freezing
Valve Leakage Amount (Water*1, *2) Internal Leakage / Seal Material: NBR (FKM)*3
- 0.1 cm3/min or less
Valve Leakage Amount (Water*1) External Leakage / Seal Material: NBR (FKM)*3
- 0.1 cm3/min or less
*1: The leakage rate is at an ambient temperature of 20°C.
*2: The leakage rate is at a pressure differential of 0.01 MPa up to the maximum operating pressure differential.
*3: See the SMC catalog regarding FKM sealing material and then select based on the other options.
For Water (N.O. Type)
For water (N.O. type) external appearance
Fluid and Ambient Temperature
- Fluid temperature: 1 to 60°C
- Ambient temperature: -20 to +60°C
*No freezing
Valve Leakage Amount (Water*1, *2) Internal Leakage / Seal Material: NBR (FKM)*3
- 0.1 cm3/min or less
Valve Leakage Amount (Water*1) External Leakage / Seal Material: NBR (FKM)*3
- 0.1 cm3/min or less
*1: The leakage rate is at an ambient temperature of 20°C.
*2: The leakage rate is at a pressure differential of 0.01 MPa up to the maximum operating pressure differential.
*3: See the SMC catalog regarding FKM sealing material and then select based on the other options.
For Oil (N.C. Type)
- *Can also be used for air or water. However, be aware that the maximum operating pressure differential and flow rate characteristics will be limited to the specifications range for the respective types of fluid being used.
- *When the fluid is oil ensure the kinematic viscosity is 50 mm2/s or less. The special construction of the armature adopted in the built-in full wave rectifier type gives an improvement in the OFF response by providing clearance on the adsorbed surface when it is switched ON.
For oil (N.C. type) external appearance
Fluid and Ambient Temperature
- Fluid temperature: -5* to +60°C
- Ambient temperature: -20 to +60°C
*Kinematic viscosity: 50 mm2/s or less
Valve Leakage Amount (Oil*1, *2) Internal Leakage / Seal Material: FKM
- 0.1 cm3/min or less
Valve Leakage Amount (Oil*1) External Leakage / Seal Material: FKM
- 0.1 cm3/min or less
*1: The leakage rate is at an ambient temperature of 20°C.
*2: The leakage rate is at a pressure differential of 0.01 MPa up to the maximum operating pressure differential.
For Oil (N.O. Type)
For oil (N.O. type) external appearance
Fluid and Ambient Temperature
- Fluid temperature: -5* to +60°C
- Ambient temperature: -20 to +60°C
*Kinematic viscosity: 50 mm2/s or less
Valve Leakage Amount (Oil*1, *2) Internal Leakage / Seal Material: FKM
- 0.1 cm3/min or less
Valve Leakage Amount (Oil*1) External Leakage / Seal Material: FKM
- 0.1 cm3/min or less
*1: The leakage rate is at an ambient temperature of 20°C.
*2: The leakage rate is at a pressure differential of 0.01 MPa up to the maximum operating pressure differential.
*Lists information for only some products.
VXZ Series Common Items
Standard Specification
| Valve Specifications | Valve Structure | Zero differential pressure type pilot-operated 2 port diaphragm type | |
|---|---|---|---|
| Withstand Pressure | 2.0 MPa (resin body type: 1.5 MPa) | ||
| Body Material | Aluminum, resin, C37, SUS *1 | ||
| Seal Materials | NBR, FKM, EPDM | ||
| Enclosure | Dustproof, jetproof (IP65)*2, *4 | ||
| Environment | Locations without corrosive or explosive gases | ||
| Coil Specifications | Rated Voltage | AC | 100 V AC, 200 V AC, 110 V AC, 230 V AC, (220 V AC, 240 V AC, 48 V AC, 24 V AC)*3 |
| DC | 24 V DC, (12 V DC)*1 | ||
| Allowable Voltage Fluctuation | ±10% of rated voltage | ||
| Allowable Leakage Voltage | AC (Built-In Full Wave Rectifier Type) | 5% or less of rated voltage | |
| DC | 2% or less of rated voltage | ||
| Coil Insulation Type | Class B (for air/water/oil), class H (for high temperature water / high temperature oil) | ||
*1: Body material: aluminum. Only VXZ23/VXZ2A use resin.
*2: Electrical entry "Faston" type terminal is IP40 compliant.
*3: Voltage inside () indicates special voltage. (See the SMC catalog)
*4: See the SMC catalog for information on protection grades. Contact the SMC support center regarding use in locations that require water resistance.
For Air Type Dimensions / Body Material: Resin (One-Touch Fitting Type)
(Units: mm)
Grommet dimensional drawing
(Units: mm)
Grommet (with surge voltage suppressor) dimensional drawing
(Units: mm)
DIN terminal dimensional drawing
(Units: mm)
Conduit terminal dimensional drawing
(Units: mm)
| Model | One-Touch Fitting P | B | B1 | C | D | E | F | Bracket Mounting Method | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U | U1 | W | X | X1 | Y | ||||||||
| VXZ23 VXZ2A | ø10 mm, ø3/8", ø12 mm | 69 | 37.5 | 90 (96.5) | 35 | 15.5 | 22 | 54 | 27 | 44 | 65 | 32.5 | 56 |
(Units: mm)
| Model | One-Touch Fitting P | Electrical Entry | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Grommet | Grommet (With Surge Voltage Suppressor) | DIN Terminal | Conduit terminal | |||||||||
| Q | R | Q | R | Q | R | S | Q | R | S | T | ||
| VXZ23 VXZ2A | ø10 mm, ø3/8", ø12 mm | 29.5 | 63.5 (70) | 32.5 | 50 (56.5) | 67 | 55.5 (62) | 55 | 102 | 57.5 (64) | 71 | 105 (111.5) |
*Values in ( ) are the dimensions for the normally open (N.O.) type.
Precautions
- *Be sure to read the individual product precautions in the SMC catalog before use.
- *When used at low flow rates with a pressure differential of less than 0.01 MPa, operations may become unstable. In such a case, contact the SMC support center.
- *See the SMC catalog for details on handling one-touch fittings and applicable tubing.
- *See the SMC catalog for information other than that detailed above.
Liste des numéros de pièces
| Référence pièce |
|---|
| Commande suspendus |
| Commande suspendus |
Prix unitaire (hors TVA)(Prix unitaire TTC) | Jour d'expédition standard |
|---|
97.19 € ( 115.66 € ) | 26 jours ouvrables |
97.19 € ( 115.66 € ) | 26 jours ouvrables |
85.23 € ( 101.42 € ) | 26 jours ouvrables |
84.77 € ( 100.88 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
82.32 € ( 97.96 € ) | 26 jours ouvrables |
84.77 € ( 100.88 € ) | 26 jours ouvrables |
89.79 € ( 106.85 € ) | 26 jours ouvrables |
89.79 € ( 106.85 € ) | 26 jours ouvrables |
89.79 € ( 106.85 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 4 jours ouvrables |
94.53 € ( 112.49 € ) | 26 jours ouvrables |
93.39 € ( 111.13 € ) | 26 jours ouvrables |
92.95 € ( 110.61 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
93.39 € ( 111.13 € ) | 26 jours ouvrables |
105.35 € ( 125.37 € ) | 26 jours ouvrables |
91.89 € ( 109.35 € ) | 26 jours ouvrables |
94.77 € ( 112.78 € ) | 26 jours ouvrables |
105.35 € ( 125.37 € ) | 26 jours ouvrables |
108.24 € ( 128.81 € ) | 26 jours ouvrables |
105.35 € ( 125.37 € ) | 26 jours ouvrables |
106.76 € ( 127.04 € ) | 26 jours ouvrables |
109.65 € ( 130.48 € ) | 26 jours ouvrables |
106.76 € ( 127.04 € ) | 26 jours ouvrables |
109.65 € ( 130.48 € ) | 26 jours ouvrables |
106.76 € ( 127.04 € ) | 26 jours ouvrables |
94.53 € ( 112.49 € ) | 26 jours ouvrables |
99.89 € ( 118.87 € ) | 26 jours ouvrables |
93.39 € ( 111.13 € ) | 26 jours ouvrables |
92.95 € ( 110.61 € ) | 26 jours ouvrables |
92.95 € ( 110.61 € ) | 26 jours ouvrables |
92.95 € ( 110.61 € ) | 26 jours ouvrables |
91.89 € ( 109.35 € ) | 26 jours ouvrables |
94.77 € ( 112.78 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
93.39 € ( 111.13 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
105.35 € ( 125.37 € ) | 26 jours ouvrables |
105.35 € ( 125.37 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
90.48 €59.72 € ( 71.07 € ) | Article en stock - 1 jour ouvrableDisponible pour une expédition le jour même |
97.44 € ( 115.95 € ) | 26 jours ouvrables |
93.39 € ( 111.13 € ) | 26 jours ouvrables |
90.48 € ( 107.67 € ) | 26 jours ouvrables |
91.89 € ( 109.35 € ) | 26 jours ouvrables |
105.35 € ( 125.37 € ) | 26 jours ouvrables |
108.24 € ( 128.81 € ) | 26 jours ouvrables |
Plus d'informations
Informations de base
SMC Solenoid Valve.
[Features]
· IP65 protective enclosure
· UL94V-0 conforming flame resistance
· Piping variations
· Clearance
· Improved armature durability
· Low noise construction
Attention
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.